ParaBody 827 LAT MACHINE Bedienungsanleitung

827 LAT MACHINE

CLASSH

PART # 7302801

REV.A Revision: 06/14/02

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

Version: 827108

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Gym Layout.....................4

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................5

Assembly Instructions.....5-15

General Maintenance.......16

Warranty Statement..........17

Product Services..............18

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody LAT MACHINE. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

* Rubber mallet or hammer

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* 5/32”Allen wrench

* Adjustable wrench

* Tape measure

NOTE:BOLTLENGTHISMEASUREDFROMTHEUNDERSIDEOFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

Minimum Required Usable Space

Length = 82 inches (208.5 cm) 6’ 10”

Width = 71 inches (180.5 cm) 5’11”

Height = 83 inches (211 cm) 6’ 11”

1 Square = 1’ X 1’

Length = 82 inches (208.5 cm) 6’ 10”

Width = 108 inches (180.5 cm) 9’ 0”

1’ 2’ 3’ 4’ 5’

1’

5’

4’

3’

2’

Dimensions Including Leg Press (optional)

0123456

1/2 1/2 1/2 1/2 1/2 1/2

PARTS LIST

PART #

6759109

6758909

6760209

6760109

6759810

6759310

6275310

6274410

6489910

6664821

6194601

6576201

3103102

3116201

3116101

6177001

6405201

7234801

6692601

3119301

KEY

QTY

PART #

6590801

6387901

3105401

3116001

3114403

3114702

3114401

3114701

3235209

3235211

3235216

3235312

3235316

6480301

6412001

3103801

3108102

6075906

6140701

DESCRIPTION

3 X 2” INSERT GUIDE

5”VINYL CAP

STARLOCK COLLAR

1-1/4” SQ. RUBBER BUMPER

3/8” WASHER

3/8” LOCK NUT

1/2” WASHER

1/2” LOCK NUT

3/8 X 2-1/4” BOLT

3/8 X 2-3/4” BOLT

3/8 X 4” BOLT

1/2 X 3” BOLT

1/2 X 4” BOLT

3/8” FLANGE SPACER

SPRING PINASSEMBLY

5/16” SNAP LINK

1/4”QUICKDISCONNECTLK

12LINKCHAIN

1X1”GLIDE

QTY

DESCRIPTION

BASE

FRONTUPRIGHT

REARUPRIGHT

TOP BOOM

CARRIAGE

ROLLER PAD SUPPORT

LATBAR

LOW ROW BAR

1/4 X 2 X 7-1/4” PLATE

SEATPAD

ROLLER PAD

CABLE

1 X 8” GRIP

3-1/2” PULLEY

4-1/2” PULLEY

2-1/2X5-1/2” NON-SKIDSTP

2”SQ.ENDCAP

2”SQ COVERCAP

3X 2”END CAP

2-1/2”ROUNDENDCAP

KEY

LEA

FIGURE 1

STEP 1:

• Apply NON-SKID STRIPS (16) to BASE (1) as shown

• Attachtwo 2” SQ.COVER CAPS (18) onto theends of the REAR UPRIGHT (3)as shown in FIGURE 1.

• Insert two 3 X 2” END CAPS (19) into the ends of the BASE (1) and REAR UPRIGHT (3) as shown in FIGURE 1.

• Insert two 2-1/2” ROUND END CAP (20) into the tube on the BASE FRAME (1) as shown in FIGURE 1.

32 1/2 X 3”

27 28

• LOOSELY assemble the REAR UPRIGHT (3) to the BASE (1) using two 1/2 X 3” BOLTS (32), two 1/2” WASHERS (27), and

two 1/2” LOCK NUTS (28). See FIGURE 1.

FIGURE 2

STEP 3:

• SECURELY assemble one SPRING PIN ASSEMBLY (35) to the spring pin barrel on the ROLLER PAD SUPPORT (6). See

FIGURE 3.

• Assemble two ROLLER PADS (11) to the ROLLER PAD SUPPORT (6) using two STARLOCK COLLARS (23).

FIGURE 3

STEP 2:

• SECURELY attach one 1-1/4” SQ. RUBBER BUMPER (24) to the CARRIAGE (5) as shown in FIGURE 2.

• Insert two 3 X 2” GUIDES (21) into the ends of the ROLLER PAD SUPPORT (6) as shown in FIGURE 3.

• Attach eight 1 X 1” GLIDES (39) to the ends the CARRIAGE (5) as shown in FIGURE 2 using the following steps:

• Thoroughly clean all surfaces where the 1 X 1” GLIDES (39) are to be attached.

• Remove the 1 X 1” GLIDES (39) from the paper backing and firmly apply them to all shown surfaces.

STEP 4:

FIGURE 4

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• Insert two 2” SQ. END CAPS (17) into the FRONT UPRIGHT (2) as shown in FIGURE 4.

• LOOSELY assemble the FRONT UPRIGHT (2) to the BASE (1) using two 1/2 X 4” BOLTS (33) and two 1/2” LOCK NUTS (28).

See FIGURE 4.

33 1/2 X 4”

STEP 5:

FIGURE 5

• CAREFULLY slide the ROLLER PAD SUPPORT (6) over into the FRONT UPRIGHT (2) and engage the SPRING PIN into

one of the adjustment holes. See FIGURE 5.

• CAREFULLY slide the CARRIAGE (5) over into the REAR UPRIGHT (3) as shown in FIGURE 5.

STEP 6:

FIGURE 6

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• LOOSELY assemble the TOP BOOM (4) to the FRONT UPRIGHT (2) using one 1/2 X 3” BOLT (32), two 1/2” WASHERS (27),

and one 1/2” LOCK NUT (28). See FIGURE 6.

TIGHTEN!

• SECURELY tighten all connections made to up to this point.

• LOOSELY assemble the TOP BOOM (4) to the REAR UPRIGHT (3) using two 1/2 X 4” BOLTS (33), two 1/2” WASHERS (27),

and one 1/2” LOCK NUT (28). See FIGURE 6. (NOTE: IMPORTANT! Make sure bolts in TOP BOOM are facing as shown

in FIGURE 6.)

32 1/2 X 3”

33 1/2 X 4”

30 3/8 X 2-3/4

• SECURELY assemble the SEAT PAD (10) to the FRONT UPRIGHT (2) using two 3/8 X 2-3/4” BOLTS (30) and two 3/8”

WASHERS (25). See FIGURE 6.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 914101 Bedienungsanleitung

ParaBody

ParaBody 8661O2 Bedienungsanleitung

ParaBody

ParaBody 778 Bedienungsanleitung

ParaBody

ParaBody 866103 Bedienungsanleitung

ParaBody

ParaBody 867101 Montageanleitung

ParaBody

ParaBody 827 Montageanleitung

ParaBody

ParaBody 875101 Montageanleitung

ParaBody

ParaBody 661101 Bedienungsanleitung

ParaBody

ParaBody Parabody 844 Lat Option Bedienungsanleitung

ParaBody

ParaBody 837101 Bedienungsanleitung

ParaBody

ParaBody 893102 Montageanleitung

ParaBody

ParaBody 886101 Bedienungsanleitung

ParaBody

ParaBody 858102 Montageanleitung

ParaBody

ParaBody 216 50 LB Bedienungsanleitung

ParaBody

ParaBody 883 Bedienungsanleitung

ParaBody

ParaBody 854 Montageanleitung

ParaBody

ParaBody 801 Montageanleitung

ParaBody

ParaBody 813102 Bedienungsanleitung

ParaBody

ParaBody 883 Bedienungsanleitung

ParaBody

ParaBody 811101 Montageanleitung

ParaBody

ParaBody Leg Press 100 Bedienungsanleitung

ParaBody

ParaBody 870 Bedienungsanleitung

ParaBody

ParaBody 821 Bedienungsanleitung

ParaBody

ParaBody 823 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung