ParaBody 883 Bedienungsanleitung

883 SECOND STACK OPTION

FOR 880 GYM SYSTEM

CLASSH

PART # 7168901

REV. C Revision: 3/08/02

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

Version: 883102

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................4

Assembly Instructions.....5-31

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 880 Second Stack Option. Please read these

instructions thoroughly and keep them for future reference.

NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

* Rubber mallet or hammer

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* 7/32”Allen wrench

*Adjustable wrench

* Tape measure

PART #

7160208

7167908

6523401

7095701

7012102

6957302

7165701

7156101

3116201

6972201

3108002

6978101

KEY

QTY

PART #

3102924

3102807

3102906

3102955

3102802

3102501

3102503

6939202

6382301

3221702

3103302

7159801

DESCRIPTION

3/8 X 1-3/4” BOLT

3/8” LOW HEIGHT LOCK NUT

3/8 X 4” BOLT

3/8 X 4-1/4” BOLT

3/8” LOCK NUT

3/8” WASHER

3/4” WASHER

WEIGHTPLATE

WEIGHT PLATE BUSHING 10 CT.

E-RING

13/16” SHAFT COLLAR

THREADED HOUSING

QTY

DESCRIPTION

STACKBASE

LEFTBOOMBRACKET

GUIDE ROD

WEIGHTSTACKSHAFT

WEIGHT STACK SPACER

HEADPLATE

PRESS STACK CABLE

LEG CABLE

3-1/2” PULLEY

WEIGHT STACK PIN

WEIGHT STACK CUSHION

WEIGHTSTACK LABEL

KEY

PARTS LIST

• NOTE: If assembling the SECOND STACK OPTION to a completely assembled (including cables) 880

GYM SYSTEM without LEGPRESS OPTION, please refer to PAGE 5.

• NOTE: If assembling the SECOND STACK OPTION to a completely assembled (including cables) 880

GYM SYSTEM with LEGPRESS OPTION, please referto PAGE 16.

STEP 1:

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• REMOVE the PRESS/LEG CABLE from the 880 GYM SYSTEM . Discard the PRESS/LEG CABLE . See FIGURE 1. (NOTE:

Remove pulleys for ease of removal.)

• NOTE: Follow these steps if assembling the SECOND STACK OPTION to a completely assembled (including cables)

880 GYM SYSTEM without LEG PRESS OPTION, otherwise please refer to PAGE 4.

PRESS/LEG

CABLE

FIGURE 1

STEP 2:

FIGURE 2

• Remove the two 3/8 X 4” BOLTS, four 3/8” WASHERS and two 3/8” LOCK NUTS from the REAR UPRIGHT as shown in

FIGURE 2.

3/8 X 4” BOLTS

STEP 3:

FIGURE 3

• SECURELY assemble the STACK BASE (1) to the BASE FRAME using two 3/8 X 4-1/4” BOLTS (16), two previously removed

3/8 X 4” BOLTS, four 3/8” WASHERS (18), four previously removed 3/8” WASHERS, two 3/8” LOCK NUTS (17) and two

previously removed 3/8” LOCK NUTS as shown in FIGURE 3.

REAR UPRIGHT

16 3/8 X 4-1/4”

3/8 X 4” BOLTS

BASE FRAME 1 18

FIGURE 5

STEP 5:

FIGURE 4

• Insert two WEIGHT PLATE BUSHINGS (21) into each of the fifteen WEIGHT PLATES (20) as shown in FIGURE 4.

STEP 4:

• Slide the WEIGHT PLATE SHAFT (4) thru the hole in the HEAD PLATE (6), and lock in place using one E-RING (22) as shown in

FIGURE 5.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

FIGURE 6

STEP 6:

• Insert two GUIDE RODS (3) into the STACK BASE (1) as shown on FIGURE 6. (NOTE: If the 880 SHROUD OPTION was

purchased, place the GUIDE RODS (3) through the BOTTOM SHROUD BRACKET (found in SHROUD OPTION box)

and into the STACK BASE (1) as shown in FIGURE 6.

• Slide two WEIGHT STACK SPACERS (5), two 3/4” FLATWASHERS (19), and two WEIGHT STACK CUSHIONS (11) down

over the GUIDE RODS (3).

• Using EXTREME CARE slide all fifteen WEIGHT PLATES (20) (NOTE: If 50-LB.ADD-ON KIT was purchased, slide twenty

WEIGHT PLATES and discard two WEIGHTSTACK SPACERS (5), two 3/4” FLAT WASHERS (19) use the 50 LB.ADD-

ON HEAD PLATE and refer to the 50 LB. ADD-ON Kit instructions) down over the GUIDE RODS (3) on to the WEIGHT

STACK CUSHIONS (11). Make sure that the WEIGHT PLATES (20) are all facing as shown.

• Slide the head plate assembly down over the GUIDE RODS (3) onto the weight stack.

• Slide two SHAFT COLLARS (23) over the GUIDE RODS (3) as shown in FIGURE 6.

• (NOTE: Lubricate GUIDE RODS (3) with silicon or teflon spray available at most hardware stores.)

880 SHROUD

OPTIONONLY!

• Apply WEIGHT STACK LABELS (12) toWEIGHT PLATES (20) and HEAD PLATE (6) as shown in FIGURE 6. Begin with number

one at the HEAD PLATE (6) with larger numbers in consecutive order towards bottom of weight stack.

OPTIONAL50

LB.ADD-ONKIT

FIGURE 7

STEP 7:

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• CAREFULLYremove the BOOM PLATE from the the REAR UPRIGHT and the FRAME as shown in FIGURE 7. Discard the BOOM

PLATE.

FIGURE 8

STEP 8:

• Swing the GUIDE RODS (3) into the guide rod bushings in the LEFT BOOM BRACKET (2) as shown in FIGURE 8.

• SECURELY assemble the LEFT BOOM BRACKET (2) and the BOOM BRACKET to the REAR UPRIGHT and the FRAME using

the previously removed bolts, nylon spacers, washers and lock nuts as shown in FIGURE 8.(NOTE:The 2” NYLON SPACERS go

on the LEFT BOOM BRACKET only.)

BOOM PLATE

REAR UPRIGHT

FRAME

BOOM BRACKET

REAR

UPRIGHT

FRAME

2”

NYLON

SPACER

3”NYLON SPACER

2”NYLON

SPACER

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP 9:

FIGURE 9

• Unscrew the threaded ends of the WEIGHT STACK CABLE from the WEIGHT STACK SHAFT and remove the two PULLEYS

from the BOOM BRACKET. See FIGURE 9.

WEIGHT

STACK

CABLE

PULLEY

BOOM BRACKET

Andere Handbücher für 883

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 813 Bedienungsanleitung

ParaBody

ParaBody 778 Bedienungsanleitung

ParaBody

ParaBody 801101 Montageanleitung

ParaBody

ParaBody 705101 Montageanleitung

ParaBody

ParaBody 221 Bedienungsanleitung

ParaBody

ParaBody 811 Montageanleitung

ParaBody

ParaBody 861 Montageanleitung

ParaBody

ParaBody Serious Steel 359101 Bedienungsanleitung

ParaBody

ParaBody Leg Press Factor 625 Installationsanleitung

ParaBody

ParaBody 832101 Bedienungsanleitung

ParaBody

ParaBody 880 Bedienungsanleitung

ParaBody

ParaBody 843102 Bedienungsanleitung

ParaBody

ParaBody 700 Montageanleitung

ParaBody

ParaBody 874 Montageanleitung

ParaBody

ParaBody 883101 Bedienungsanleitung

ParaBody

ParaBody 823 Bedienungsanleitung

ParaBody

ParaBody 827101 Montageanleitung

ParaBody

ParaBody 887 Bedienungsanleitung

ParaBody

ParaBody 832102 Bedienungsanleitung

ParaBody

ParaBody Free Weight Systems Bedienungsanleitung

ParaBody

ParaBody 827102 Bedienungsanleitung

ParaBody

ParaBody 876101 Montageanleitung

ParaBody

ParaBody 705102 Bedienungsanleitung

ParaBody

ParaBody 893104 Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung