ParaBody 893104 Bedienungsanleitung

893104 PRO SYSTEM

Part # 6817401 Revision:6/8/991

ASSEMBLY INSTRUCTIONS

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the Parabody 893104 PRO SYSTEM. Please read these instructions

thoroughly and keep them for future reference. This product must be assembled on a flat, level

surface to assure its proper function.

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* Adjustable wrench

* Tape measure

NOTE:BOLTLENGTHISMEASURED FROMTHEUNDERSIDEOFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy

water. Touch-up paint can be purchased from your Parabody customer service representative

at (800) 328-9714.

BoltLengthRuler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

WELCOMETOTHEWORLDOF Serious steel!

There is a risk assumed by individuals who use this type of equipment. To minimize risk, please

follow these rules:

2. Do not allow minors or children to play on or around this equipment.

1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.

Failure to do so may result in serious injury.

3. Exercise with care to avoid injury.

4. If unsure of proper use of equipment, call your local Parabody distributor or call the

Parabody customer service department at (800) 328-9714.

BOLT LENGTH

5. Consult a physician before beginning any exercise program.

PARTS LIST

PART #

6816103

6815703

6815203

6814803

6815003

6816302

6798103

6801102

6275302

6274402

6807602

6807702

6546302

6812402

6194601

3116201

3116101

6816401

6692601

3103102

6140701

6405201

3116001

6817101

6811701

KEY

QTY

PART #

6824601

6542402

3105303

3102901

3102933

3102922

3102906

3102928

3102910

3102918

3102917

3102949

6480301

3102501

3102807

3102801

3102502

3102801

6606801

3105401

3103801

3108102

6075906

DESCRIPTION

3-1/4X1-3/4”GLIDE

1/2X3”VINYLCAP

3/16X1-3/4X5-1/4” PLATE

9/16”CAPPLUG

3/8X1-1/4”BOLT

3/8X2”BOLT

3/8X2-3/4”BOLT

3/8X4”BOLT

1/2X2-1/2”BOLT

1/2X3”BOLT

1/2X3-1/4”BOLT

1/2X4”BOLT

1/2X5-1/2”BOLT

3/8”FLANGESPACER

3/8”WASHER

3/8”LOWHEIGHTLOCKNUT

3/8”LOCK NUT

1/2”WASHER

1/2”LOCK NUT

1/2”SPRINGPINASSEMBLY

3/4”STARLOCKCOLLAR

5/16”SNAPHOOK

1/4”QUICKLINK

12LINKCHAIN

QTY

DESCRIPTION

TOPBOOM

UPRIGHTFRAME

KNEESUPPORT

UPRIGHTSUPPORT

FRONTUPRIGHT

FOOTPLATE

UPPERCROSSSUPPORT

LATBARSUPPORT

LATBAR

LOWROWBAR

LEFTSAFETYRAIL

RIGHTSAFETYRAIL

CARRIAGE

SMARTRACK

4X 7”ROLLERPAD

3-1/2”PULLEY

4-1/2”PULLEY

121-1/2”CABLE

3X2”ENDCAP

1X8”GRIP

1”SQ.GLIDE

2”SQ.ENDCAP

1-1/4”SQ.RUBBERBUMPER

1-5/8X5-1/2” NON-SKIDSTRIP

13-1/2X1-5/8”RUBBERSTRIP

KEY

FIGURE 1

STEP1:

• Applyeight 1”SQ. GLIDES(21)to theinside of the CARRIAGE (13) as shownin FIGURE 1.

• Attachone 1-1/4” SQ. RUBBER BUMPER (23) to the bottom of the CARRIAGE (13) as shown in FIGURE 1.

FIGURE 3

STEP3:

• LOOSELYassemblethe FRONTUPRIGHTS (5)totheUPRIGHTSUPPORT(4)usingfour1/2X4”BOLTS(37),four1/2”WASHERS(43),

andfour 1/2” LOCKNUTS(44) asshown in FIGURE3.

• Insertfour 2” SQ. END CAPS (22) & two 3 X 2” ENDCAPS (19) to the ends of the FRONT UPRIGHTS (5) as shownin FIGURE 3.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

1/2 X 4” 37

FIGURE 2

STEP2:

• Attachtwo NON-SKID STRIPS (24) to the FOOT

PLATE(6)as shown inFIGURE 2.

• Assembletwo 13-1/2 X 1-5/8” RUBBERSTRIPS (25)to the bottom of the FRONT UPRIGHTS(5) as shown in FIGURE 3.

• LOOSELYassembletheFOOTPLATE (6) and the UPRIGHTFRAME(2)totheUPRIGHTSUPPORT(4) using two 1/2” X 3-1/4” BOLTS

(36)and two 1/2”LOCK NUTS (44) as shownin FIGURE 4.

FIGURE 4

STEP4:

1/2X 3-1/4” 36

• Slidethe CARRIAGE (13)over theUPRIGHT FRAME (2)as shownin FIGURE 4.

• Insert one 2” SQ. END CAPS (22) to the end of the UPRIGHT FRAME (2) as shown in FIGURE 4.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

FIGURE 5

STEP5:

• LOOSELYassemble the UPPERCROSSSUPPORT(7) tothetopsetofholesof the FRONTUPRIGHTS(5)asshowninFIGURE5 using

two1/2 X 3” BOLTS(35),two 1/2”WASHERS(43),and two 1/2”LOCK NUTS (44).

35 1/2 X 3”

1/2 X 3” 35

• LOOSELYassemble the twoSMARTRACKS (14) to the outside of the FRONTUPRIGHTS (5) as shown in FIGURE 5 using six 1/2 X

3”BOLTS (35), four 1/2”WASHERS (43),andsix1/2” LOCK NUTS (44).

FIGURE 6

STEP6:

• Attach six 3-1/4 X 1-3/4” GLIDES (26) to the LEFT & RIGHT SAFETY RAILS (11 & 12) as shown in FIGURE 6, using the

following steps:

• Thoroughly clean all surfaces where the 3-1/4 X 1-3/4” GLIDES (26) are to be attached.

• Remove the 3-1/4 X 1-3/4”” GLIDES (26) from the paper backing and firmly apply them flush with all shown surfaces.

• Attach two 13-1/2 X 1-5/8” RUBBER STRIPS (25) to the LEFT & RIGHT SAFETY RAILS (11 & 12) as shown in FIGURE 6.

• AssembletheLEFT& RIGHT SAFETYRAILS (11 &12) to theFRONT UPRIGHTS (5) as shownin FIGURE 7.

FIGURE 7

STEP7:

STEP8:

FIGURE 8

STEP9:

FIGURE 9

• LOOSELYassemble theTOPBOOM(1)to theUPRIGHTFRAME (2) using one 1/2 X 2-1/2” BOLTS(34), one1/2 X3” BOLT(35),

two1/2”WASHERS (43), and one 1/2” LOCK NUT (44) as shown in FIGURE 8.

• Insert one 3 X 2” END CAP (19) into the end of the TOP BOOM (1). See FIGURE 8.

• SlidetwoVINYLCAPS (27) over the LATBAR SUPPORT(8) as shown in FIGURE9.

• SECURELYassemble theLATBAR SUPPORT(8)to theTOPBOOM(1)usingone3/8 X 2-3/4”(32)and one 3/8”LOWHEIGHTLOCK

NUT(41). SeeFIGURE9.

33 3/8 X 4”

32 3/8 X 2-3/4”

1/2X2-1/2” 34

1 44

32 3/8 X 2-3/4”

3/8”LOWHEIGHT 41

*SECURELYTIGHTENALLLOOSECONNECTIONSMADEUPTOTHISPOINT!

• LOOSELYassemble the TOPBOOM(1) tothe UPPER CROSS SUPPORT(7) using two3/8 X4” BOLTS (33),four 3/8”WASHERS

(40)andtwo3/8”LOCKNUTS(42). See FIGURE 8.

• LOOSELYassemble theTOPBOOM(1) to the UPRIGHTFRAME (2) using one 3/8 X 2-3/4” BOLTS(32) and one 3/8” LOCK NUT

(42)as shown inFIGURE 8.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

35 1/2 X 3”

STEP10:

FIGURE 10

• Routeone CABLE(18) throughthe TOPBOOM (1)as shown inFIGURE 10.(NOTE: Makesure CABLEis routedoverbolt!)

• SECURELYassemble three 3-1/2” PULLEYS (16) into the slots of the TOPBOOM (1) using three 3/8 X 2-3/4” BOLTS (32), six 3/8”

FLANGESPACERS (39), andthree3/8” LOCK NUTS(42)as shown inFIGURE10. (NOTE:Makesurethecableisroutedoverallthe

pulleys.)

3/8 X 2-3/4” 32

Makesure CABLE

is routed overbolt!

STEP11:

FIGURE 11

• Place one 3-1/2” PULLEY (16) into the loop of the CABLE (18) below the second and third PULLEY of the TOP BOOM (1) as shown

inFIGURE11.

• LOOSELYassembletwo 3/16 X 1-3/4 X 5-1/4” PLATES(28) to each side of the 3-1/2” PULLEY(16) using one 3/8 X 2” BOLT(31),

two3/8”WASHERS (40),and one 3/8”LOCK NUT(42).See FIGURE 11.

• Attach the CABLE (18) from the TOP BOOM (1) to the CARRIAGE (13) using one 1/4” QUICK LINK (48) as shown in FIGURE 11.

(IMPORTANT!SecurelytightenQUICKLINK.)

!IMPORTANT!

SECURELY

TIGHTEN

31 3/8 X 2”

0123456

1/2 1/2 1/2 1/2 1/2 1/2

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 870 Bedienungsanleitung

ParaBody

ParaBody 474 Bedienungsanleitung

ParaBody

ParaBody 704101 Montageanleitung

ParaBody

ParaBody 830 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

ParaBody

ParaBody 861 Montageanleitung

ParaBody

ParaBody 844 Bedienungsanleitung

ParaBody

ParaBody 810 Montageanleitung

ParaBody

ParaBody 880101 Bedienungsanleitung

ParaBody

ParaBody 661101 Bedienungsanleitung

ParaBody

ParaBody 884101 Bedienungsanleitung

ParaBody

ParaBody 883 Bedienungsanleitung

ParaBody

ParaBody 838101 Bedienungsanleitung

ParaBody

ParaBody Hip Sled System Bedienungsanleitung

ParaBody

ParaBody 877102 Bedienungsanleitung

ParaBody

ParaBody Parabody 844 Lat Option Bedienungsanleitung

ParaBody

ParaBody Serious Steel 835102 Bedienungsanleitung

ParaBody

ParaBody 884 Bedienungsanleitung

ParaBody

ParaBody 824 Bedienungsanleitung

ParaBody

ParaBody 802101 Montageanleitung

ParaBody

ParaBody 821 Bedienungsanleitung

ParaBody

ParaBody 885 Bedienungsanleitung

ParaBody

ParaBody 835102 Bedienungsanleitung

ParaBody

ParaBody 875101 Montageanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung