ParaBody 435104 Bedienungsanleitung

435104 LEG PRESS ADAPTER KIT

Part#6865101 Revision:2/15/001

ASSEMBLY INSTRUCTIONS

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the 435104 Leg Press Adapter Kit. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

* Rubber mallet or hammer

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* 7/32” Allen wrench

* Adjustable wrench

* Tape measure

NOTE:BOLTLENGTHISMEASUREDFROMTHE UNDERSIDE OFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy

water. Touch-up paint can be purchased from your Parabody customer service representative

at (800) 328-9714.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

WELCOMETOTHEWORLDOF Serious steel!

There is a risk assumed by individuals who use this type of equipment. To minimize risk, please

follow these rules:

2. Do not allow minors or children to play on or around this equipment.

1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.

Failure to do so may result in serious injury.

3. Exercise with care to avoid injury.

4. If unsure of proper use of equipment, call your local Parabody distributor or call the

Parabody customer service department at (800) 328-9714.

STEP 1

FIGURE 1

PART #

6747603

3116202

3108102

6427101

3118701

3201501

6271801

6747901

KEY

QTY

PART #

3102701

3102501

3102802

3102502

3102801

3102902

3102910

3102909

DESCRIPTION

3/8”HEXNUT

3/8”WASHER

3/8”LOCKNUT

1/2”WASHER

1/2”LOCKNUT

3/8X2-1/4”BOLT

1/2X3” BOLT

3/8X 1”

QTY

DESCRIPTION

FRONTLEG

3-1/2”PULLEY

QUICKDISCONNECTLINK

KEYHOLECLEVIS

2”PULLEY

SWIVELSNAP

72”ELASTICCORD

LEGPRESSCABLE

KEY

NOTE: TheLEGPRESSATTACHTMENT(832101)must beassembledbeforeconnecting ittothe

PARABODY425104HOMEGYM

PARTS LIST

• REMOVEthe four 3/8” X 1”BUTTON HEADCAP SCREWS from the rearSHROUD. Removethe SHROUD fromthe 425104HOME

GYM.SeeFIGURE1.

REAR SHROUD

3/8” X 1” BUTTON

HEAD CAP SCREW

3/8” X 1” BUTTON

HEAD CAP SCREW

STEP 2

FIGURE 2

REAR

SHROUD

• If the 445104 SECOND STACK OPTION is not installed, the rear SHROUD opening must be removed.Apply pressure to the bottom

of the SHROUD where the “V” groove is and carefuly remove the weight stack opening on the SHROUD as shown in FIGURE 2.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

FIGURE 3

STEP3

• Removetwo 3/8”LOCK NUTS,two 3/8”HEX NUTS,two SWIVEL SNAP(68) (keepelastic cordsattached), two

3/8X 1/2” SPACERS,and one 3/8”THREADED SHAFTfrom thebracket on the BASE as shown inFIGURE 3.

BASE

HEXNUT

• Discard the two 3/8 X 1/2” SPACERS.

HEXNUT

3/8 X 1/2”

SPACERS

(DISCARD)

3/8”THREADEDSHAFT

SWIVELSNAP

3/8”LOCKNUT

SWIVELSNAP

3/8”LOCKNUT

ELASTICCORD

FIGURE 4

BASE

HEXNUT 3/8” LOCKNUT

STEP4

• Assemble the two previously removed 3/8” HEX NUTS, two previously removed SWIVEL SNAPS, one 3-1/2” PULLEY (2), and two

previouslyremoved 3/8” LOCK NUTS to the previously removed 3/8”THREADED SHAFT as shown in FIGURE 4.

HEXNUT

3/8”LOCKNUT

0123456

1/2 1/2 1/2 1/2 1/2 1/2

3/8”THREADEDSHAFT

SWIVELSNAP

FIGURE 5

STEP5

• Removeone 3/8 X2” BOLT, two 3/8”WASHERS,one2-7/8” L-BRACKET, one 4-1/2”PULLEY,and one 3/8”LOCK NUT from the

upper flat on the BASE as shown in FIGURE 5.

BASE

3/8”WASHER

4-1/2” PULLEY

3/8”WASHER

3/8”LOCK NUT

2-7/8”L-BRACKET

3/8”X 2” BOLT

FIGURE 7A

(WITHOUT

445104 SECOND

STACK OPTION)

STEP 7A

3/8”LOCKNUT

TOP BOOM

9 3/8”HEX NUT

• SECURELY assemble one 2” PULLEY(5) to the 3/8”THREADED SHAFT on theTOPBOOMusing one previously installed 3/8”

WASHER, one 3/8”HEXNUT (9) and one previously installed 3/8” LOCKNUTasshown in FIGURE 7A.

3/8” WASHER

FIGURE 6

STEP6

• SECURELY assemblethe previouslyremoved 4-1/2”PULLEYtothe BASEusing one3/8 X2-1/4” BOLT(14), two previously

removed3/8”WASHERS,onepreviously removed2-7/8” L-BRACKET,one SWIVELSNAP(6), one3/8” HEXNUT(9), andone

previouslyremoved3/8” LOCK NUT.See FIGURE 6.

BASE

14 3/8X 2-1/4”

3/8”WASHER

4-1/2” PULLEY

2-7/8”L-BRACKET

9 HEXNUT

3/8”LOCK NUT

• Ifthe 445104 SECOND STACKOPTIONis installed followSTEP7B .

3/8”WASHER

• Remove one 3/8” WASHER and one 3/8” LOCK NUT from the 3/8”THREADED SHAFT on theTOPBOOM.

FIGURE 7B (WITH

445104 SECOND

STACK OPTION)

STEP 7B

• If the 445104 SECONDSTACK OPTION is NOTinstalled proceedto STEP8 .

TOPBOOM

3/8” X 1” 16

5 11 3/8”LOCK NUT

• SECURELYassemble one 3/8 X1” BOLT(16),one 3/8”WASHER(10), one2” PULLEY(5)andone 3/8” LOCK NUT(11)to the

bracket on the TOP BOOM as shown in FIGURE 7B.

STEP8

• SECURELY attach one 3-1/2” PULLEY (2) to the FRONT

LEG(1)usingone3/8X 2-1/4” BOLT(14),two3/8”WASH-

ERS(10),andone3/8”LOCKNUT(11). See FIGURE 8.

• Attach the open end of PRESS LINK CABLE (8) to the

QUICKDISCONNECTLINK(3).SeeFIGURE8.

• SECURELY tightentheQUICKDISCONNECT(3)tothe

tabon theFRONT LEG (1) as shownin FIGURE8.

FIGURE 8

3/8X 2-1/4” 14

SECURELY

TIGHTEN!

10 11

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP9

FIGURE 9

• RouteLEGPRESSCABLE(8)around the 3-1/2” PULLEYontheLEGPRESSand UNDER the3-1/2”PULLEYon the FRONT LEG (1)

asshown in FIGURE 9.

• SECURELYattach the LEG PRESSto the FRONTLEG(1) using two 1/2” X3” BOLTS (15), two1/2”WASHERS(12),and two 1/2”

LOCKNUTS(13).SeeFIGURE9.

LEGPRESS

1/2X 3”15

12 8

FIGURE 10

STEP10

• SECURELYattach the FRONTLEG(1)to425BASEusingtwo1/2X3”BOLTS (15), two 1/2”WASHERS(12)andtwo1/2”LOCKNUTS

(13).SeeFIGURE10.

• RouteLEG PRESS CABLE(8) under the3-1/2”PULLEY on the425 BASE asshown in FIGURE10.

13 12

1/2 X 3” 15

BASE

0123456

1/2 1/2 1/2 1/2 1/2 1/2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ParaBody Heim-Fitnessstudio Handbücher

ParaBody

ParaBody 359101 Bedienungsanleitung

ParaBody

ParaBody GS2 Bedienungsanleitung

ParaBody

ParaBody 909101 ST Bedienungsanleitung

ParaBody

ParaBody 965101 Bedienungsanleitung

ParaBody

ParaBody 841101 Bedienungsanleitung

ParaBody

ParaBody 807 BODYSYSTEM Bedienungsanleitung

ParaBody

ParaBody PBF460 Bedienungsanleitung

ParaBody

ParaBody 829 Bedienungsanleitung

ParaBody

ParaBody 94 Bedienungsanleitung

ParaBody

ParaBody 950 st Bedienungsanleitung

ParaBody

ParaBody 873 Bedienungsanleitung

ParaBody

ParaBody 400102 Bedienungsanleitung

ParaBody

ParaBody PBF508 Bedienungsanleitung

ParaBody

ParaBody Parabody 805 Bedienungsanleitung

ParaBody

ParaBody 465104 Bedienungsanleitung

ParaBody

ParaBody PBF203B Kurzanleitung

ParaBody

ParaBody PBF405C Bedienungsanleitung

ParaBody

ParaBody 400101 Bedienungsanleitung

ParaBody

ParaBody 897101 Bedienungsanleitung

ParaBody

ParaBody 701 Bedienungsanleitung

ParaBody

ParaBody 220 Bedienungsanleitung

ParaBody

ParaBody 894104A Bedienungsanleitung

ParaBody

ParaBody Parabody 660101 Bedienungsanleitung

ParaBody

ParaBody 777101 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung

Stamina

Stamina 55-1532 Bedienungsanleitung