ParaBody Parabody 663 Bedienungsanleitung

663 660 SECOND STACK OPTION

CLASSH

PART # 7050101

REV. C Revision: 07/31/01

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

Version: 663101

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Parts list..........................4

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Assembly Instructions.....4-16

General Maintenance.......17

Warranty Statement..........18

Product Services..............19

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 663 660 Second Stack Option. Please read these

instructions thoroughly and keep them for future reference.

NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

* Rubber mallet or hammer

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* 7/32”Allen wrench

*Adjustable wrench

* Tape measure

STEP 2

FIGURE 2

FIGURE 1

STEP 1

• REMOVE the four 3/8” X 1” BUTTON HEAD CAP SCREWS from the top of the front SHROUD & rear SHROUD. See FIGURE 1.

3/8” X 1” BUTTON

HEAD CAP SCREW

PART #

6523401

7095701

7012102

6957302

7032302

3116101

6972201

3108002

3117401

KEY

QTY

PART #

6978101

3102909

6480301

3102922

3102802

3102503

6939202

6382301

3221702

DESCRIPTION

WEIGHTSTACKLABEL

3/8 X 1” BOLT

3/8” FLANGE SPACER

3/8 X 2-3/4” BOLT

3/8” LOCK NUT

3/4” WASHER

WEIGHTPLATE

WEIGHT PLATE BUSHING 10 CT.

E-RING

QTY

DESCRIPTION

GUIDEROD

WEIGHTSTACK SHAFT

WEIGHT STACK SPACER

HEADPLATE

PRESS-STACK CABLE

4-1/2” PULLEY

WEIGHT STACK PIN

WEIGHT STACK CUSHION

CAP PLUG

KEY

PARTS LIST

• REMOVE the four 3/8” X 1” BUTTON HEAD CAP SCREWS from the bottom of the front SHROUD & rear SHROUD. Remove the

SHROUDS from the 660101 HOME GYM. See FIGURE 2.

REAR SHROUD

FRONT SHROUD

3/8” X 1” BUTTON

HEAD CAP SCREW

STEP 3

FIGURE 3

• Unscrew the threaded ends of the HEAD PLATE CABLE from the WEIGHT STACK SHAFT & the D-RING and remove HEAD

PLATE CABLE. The HEAD PLATE CABLE will be used later. See FIGURE 3. (NOTE: Remove pulleys for ease of removal.)

HEAD

PLATE

CABLE

(7041801)

D-RING

0123456

1/2 1/2 1/2 1/2 1/2 1/2

PRESSCABLE

(67249)

STEP4

• RemovethePRESSCABLE(67249)fromtheKEYHOLE CLEVIS

andELASTICCORD.(NOTE:TheLATorLEGEXTCABLEcan

bemovedoveroneholeontheD-RINGsotheKEYHOLECLEVIS

areevenlyspaced.)

FIGURE 4

ELASTIC

CORD

D-RING

KEYHOLE

CLEVIS

• Discardthe KEYHOLECLEVISandELASTICCORD.

FIGURE 5

STEP5

• (NOTE: If the 100101 LEG PRESS OPTION is installed proceed to STEP 6 otherwise proceed to STEP 7.)

TOPBOOM

3/8”LOCK NUT

3/8”HEXNUT

3-1/2”PULLEY

3/8”WASHER

3/8”LOCK NUT

2”PULLEY

3/8”WASHER

3/8”THREADEDROD

• Removeone3-1/2”PULLEY,one3/8”THREADED SHAFT, two3/8”WASHERS,one2” PULLEY(twoifthe 435104 is installed), one

3/8”HEXNUTandtwo3/8”LOCK NUTS from the bracket on the TOP BOOM. SeeFIGURE5.

• Discardthe3-1/2”PULLEYand the 3/8”THREADEDSHAFT.

STEP6

FIGURE 6

• Assemble the previously removed 2” PULLEYto the bracket on the TOP BOOM using one 3/8 X 1” BOLT (11), one previously removed

3/8”WASHER, and one previously removed 3/8” LOCK NUT. See FIGURE 6.

• (NOTE: STEP 6 is only completed if the 100101 LEG PRESS OPTION is installed otherwise proceed to STEP 7.)

• Assemblethe previously removed ELASTIC CORD over the 2” PULLEY as shown in FIGURE 6.

TOPBOOM

3/8”LOCK NUT

2”PULLEY

3/8”WASHER

3/8X 1” 11

FIGURE 7

STEP 7

• LOOSELYassemble one 4-1/2” PULLEY(6)totheTOPBOOM using one 3/8 X2-3/4”BOLT(13),two3/8”FLANGE SPACERS (12),

and one 3/8” LOCK NUT (14). See FIGURE 7.

13 3/8 X 2-3/4”

TOP BOOM

FIGURE 8

STEP8

• Discard the two 3/8 X 1/2” SPACERS.

• Remove two 2” PULLEYS to the rear bracket on the TOP BOOM using one 3/8” THREADED SHAFT, two 3/8” WASHERS, two

3/8” HEX NUTS, and two 3/8” LOCK NUTS as shown in FIGURE 8.

FIGURE 9

STEP9

• Position the elastic cords over the 2” PULLEYS as shown in FIGURE 9.

• SECURELY assemblethetwopreviouslyremoved2”PULLEYS, one previously removed 3/8”THREADED SHAFT, one previously

removed3-1/2” PULLEY, two previously removed 3/8”WASHERS,two previously removed 3/8” HEX NUTS, and two previously

removed 3/8” LOCK NUTS to the rear bracket on the TOP BOOM as shown in FIGURE 9.

TOPBOOM

3/8”LOCK NUT

3/8”HEXNUT

3-1/2”PULLEY

2”PULLEY

3/8”WASHER

3/8”THREADEDROD

TOPBOOM

3/8”LOCK NUT

3/8”HEXNUT

3/8X1/2”SPACER 2”PULLEY

3/8”WASHER

3/8”THREADEDROD

ELASTIC

CORD

STEP10

• Carefullyremoveanddiscardthe PRESS CABLE as shown in FIGURE 10.

PRESSCABLE

(67249)

FIGURE 10

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP11

• Route the new PRESS-STACK CABLE (5) around the pulleys and l-brackets as shown in STEP 11. (Remove pulleys for ease of

installation.)

FIGURE 11

FIGURE 12 STEP12

PRESS-STACK

CABLE

(7032302)

PRESS-STACK

CABLE

(7032302)

PRESS-

STACK

CABLE

(7032302)

• To assemble the PRESS-STACK CABLE (5)

follow the cable routing as shown and use the

following steps:

• Screwthe threadedend ofthePRESS-STACKCABLE

(5)approximately1” into the endoftheSELECTOR

SHAFT of the HEAD PLATE on the WEIGHT

STACKasshowninFIGURE12.

• Routethe thread end of PRESS-STACK CABLE (5)

up and over the PULLEY in the TOP BOOM above

the WEIGHTSTACK. (Removepulley foreaseof

installation.)

• SECURELYtighten the pulley connection from the

previous step.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ParaBody Heim-Fitnessstudio Handbücher

ParaBody

ParaBody 220 Bedienungsanleitung

ParaBody

ParaBody 965101 Bedienungsanleitung

ParaBody

ParaBody 828 Bedienungsanleitung

ParaBody

ParaBody GS2 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 425104 Bedienungsanleitung

ParaBody

ParaBody GS6 Bedienungsanleitung

ParaBody

ParaBody 841101 Bedienungsanleitung

ParaBody

ParaBody 426103 Bedienungsanleitung

ParaBody

ParaBody 887 Bedienungsanleitung

ParaBody

ParaBody 435101 Bedienungsanleitung

ParaBody

ParaBody 400101 Bedienungsanleitung

ParaBody

ParaBody 880 Bedienungsanleitung

ParaBody

ParaBody 828104 Bedienungsanleitung

ParaBody

ParaBody FACTOR 625 Bedienungsanleitung

ParaBody

ParaBody 375101 Bedienungsanleitung

ParaBody

ParaBody 58 Bedienungsanleitung

ParaBody

ParaBody GS1 Bedienungsanleitung

ParaBody

ParaBody PBF405B Bedienungsanleitung

ParaBody

ParaBody 897101 Bedienungsanleitung

ParaBody

ParaBody PBF849 Bedienungsanleitung

ParaBody

ParaBody 662101 Installationsanleitung

ParaBody

ParaBody PBF065 Bedienungsanleitung

ParaBody

ParaBody cm3 Bedienungsanleitung

ParaBody

ParaBody 913101 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung

Stamina

Stamina 55-1532 Bedienungsanleitung