Philips FC8776 Bedienungsanleitung
FC8776
1
2
3
4
5
6
7
8
9 10
12
13
14
15
18
19
2021
17
11
16
1
English
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that
Philips offers, register your product at www.philips.com/welcome.
Important safety information
Read this important information carefully before you use the appliance and save it for future
reference.
Danger
-Do not immerse the robot or the adapter in water or any other
liquid.
-Do not use the robot on wet floors or in places where there is a
risk of contact with water or immersion in water.
-Never let the robot operate on or near flammable substances and
do not allow it to pick up ashes until they are cold.
-Do not use the robot in humid surroundings like bathrooms.
-Do not pour any liquid into the openings of the robot.
Warning
-Check if the voltage indicated on the adapter corresponds to the
local mains voltage before you connect the adapter.
-The plug must be removed from the socket-outlet before
cleaning or maintaining the appliance.
-Do not use the robot if the adapter or the robot itself is damaged
or if the robot is not complete.
-If the mains cord is damaged, you must have it replaced by
Philips, a service center authorized by Philips or similarly qualified
persons in order to avoid a hazard.
-This robot is designed for indoor use only. Keep all doors leading
outside closed.
-Do not use the robot in hazardous areas such as close to
fireplaces, showers or swimming pools.
-This robot is better suited for cleaning hard floors. Its performance
on soft floors can be somewhat limited.
6English
-This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
-Children should be supervised to ensure that they do not play
with the appliance.
-Keep pets away from the robot. Do not let pets sit or stand on the
robot.
-Keep loose clothing, hair and body parts away from the brushes
of the robot.
-Remove all fragile and light objects from the floor and make sure
the robot does not get entangled in the pull cords of blinds or
curtains.
-Do not let the robot move over the mains cords of other
appliances or other cables as this may cause a hazard.
-Stop the robot if a dangerous situation occurs or if the robot
behaves abnormally or gives off an abnormal smell.
-To prevent damage, do not use the robot if the filter is not present
in the dust container or has not been placed properly in the dust
container.
-Do not cover the robot or block the ventilation openings when the
robot is cleaning or charging. This may cause the robot to
overheat.
-Do not store the robot at a temperature above +50°C or below
0°C.
-Do not use the robot in a room with a temperature above 45°C.
-The rechargeable battery may only be replaced by qualified
service engineers. Take the robot to an authorized Philips service
center to have the battery replaced when you can no longer
recharge it or when it runs out of power quickly.
-Always return the appliance to an authorized Philips service
center for examination or repair. Repair by unqualified persons
could cause an extremely hazardous situation for the user.
7
English
-Do not incinerate, disassemble or expose the robot to
temperatures above 60°C. The rechargeable battery may explode
if overheated.
Caution
-The robot has several drop-off sensors in its bottom. These drop-
off sensors are used to detect and avoid height differences. In
some cases, the drop-off sensors may not detect a staircase or
other height difference in time. The circumstances in your home
(e.g. the light in the room, the colour or type of your floor) can
affect how well or fast the drop-off sensors react. Therefore
monitor the robot carefully, especially the first few times you use
it and when you operate it near a staircase or another height
difference.
-Do not put any tape or stickers over the drop-off sensors and
make sure you clean the drop-off sensors regularly. If the drop-off
sensors are covered or dirty, the robot is unable to detect a
staircase or other height difference.
-When you use the robot to vacuum fine sand, lime, cement dust
and similar substances, the pores of the filter become clogged.
-Never use scouring pads, abrasive cleaning agents or aggressive
liquids such as petrol or acetone to clean the appliance.
-Do not touch the mains plug with wet hands.
-Only use the adapter supplied to charge the appliance.
-Unplug the docking station or the adapter if you are not going to
use the robot for some time.
-Do not use the robot on high-pile carpets or on rugs with tassels.
-Do not clean the dust container and the filter with water or in the
dishwasher.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.
8English
General description (Fig. 1)
1 Top cover
2 Handle of dust container lid
3 Dust container lid
4 Filter
5 Dust container
6 Fan
7 Bumper
8 Docking station sensor
9 Start/stop button (to start or stop the robot)
10 Display
11 TriActive XL nozzle
12 Front wheel
13 Side brush shafts
14 Drop-off sensors
15 Battery compartment
16 Wheels
17 Suction opening
18 Side brushes
19 Small plug
20 Adapter
21 Docking station
Display
Display:
1 Warning indicator
2 WiFi connection indicator
How your robot works
What your robot cleans
This robot is equipped with features that make it a suitable cleaner to help you clean the floors in your
home.
The robot is especially suitable for cleaning hard floors, such as wooden, tiled or linoleum floors. It
may experience problems cleaning soft floors, such as carpet or rugs. If you use the robot on a carpet
or rug, please stay close by the first time to see if the robot can deal with this type of floor.
Because the robot uses infrared sensors to navigate, it may run into difficulties on very dark and shiny
floors. If you use the robot on such surfaces, please stay close by the first time to see if the robot can
deal with such a dark and shiny floor.
How your robot cleans
Cleaning system
The robot has a 2-stage cleaning system to clean your floors efficiently.
-The two side brushes help the robot clean in corners and along walls. They also help to remove dirt
from the floor and move it towards the suction opening (Fig. 3).
-The suction power of the robot picks up loose dirt and transports it through the suction opening
into the dust container (Fig. 4).
9
English
Cleaning patterns
In its auto cleaning mode, the robot uses an automatic sequence of cleaning patterns to clean each
area of the room optimally. The cleaning patterns it uses are:
1 Z-pattern or zigzag pattern (Fig. 5)
2 Random pattern (Fig. 6)
3 Wall-following pattern (Fig. 7)
4 Spot-cleaning pattern (Fig. 8)
In its auto cleaning mode, the robot uses these patterns in a fixed sequence:z-pattern, random
pattern, wall-following pattern, and spot-cleaning pattern.
When the robot has completed this sequence of patterns, it starts moving in Z-pattern again. The
robot continues to use this sequence of patterns to clean the room until the rechargeable battery runs
low, or until it is switched off manually.
Note: You can also select each mode individually by pressing the appropriate button on the remote
control. For more details, see chapter 'Using your robot', section 'Cleaning modes'.
How your robot avoids height differences
The robot has three drop-off sensors in its bottom. It uses these drop-off sensors to detect and avoid
height differences such as staircases.
Note: It is normal for the robot to move slightly over the edge of a height difference, as its front drop-
off sensor is located behind the bumper.
Caution: In some cases, the drop-off sensors may not detect a staircase or other height difference
in time. Therefore monitor the robot carefully the first few times you use it, and when you operate it
near a staircase or another height difference. It is important that you clean the drop-off sensors
regularly to ensure the robot continues to detect height differences properly (see chapter ' Cleaning
and maintenance' for instructions).
Before first use
Mounting the side brushes
1Unpack the side brushes and place the robot upside down on a table or on the floor.
2Push the side brushes onto the shafts on the bottom of the robot (Fig. 9).
Note: Make sure you attach the side brushes properly. Press them onto the shaft until you hear
them lock into position with a click.
Preparing for use
Installing the docking station
1Insert the small plug of the adapter into the socket on the docking station (1) and insert the adapter
into the wall socket (2) (Fig. 10).
2Place the docking station on a horizontal, level floor against a wall.
Note: Make sure that there are no obstacles or height differences 80 cm in front, 30 cm to the right
and 100 cm to the left of the docking station.
10 English
Inhaltsverzeichnis
Andere Philips Staubsauger Handbücher
Philips
Philips FC9310 Bedienungsanleitung
Philips
Philips FC8587 Bedienungsanleitung
Philips
Philips Impact Plus FC8388 Bedienungsanleitung
Philips
Philips MiniVac FC6048/01 Bedienungsanleitung
Philips
Philips FC8148 Bedienungsanleitung
Philips
Philips 3000 series Bedienungsanleitung
Philips
Philips FC8446 Bedienungsanleitung
Philips
Philips FC8026/01 Bedienungsanleitung
Philips
Philips FC9160 Bedienungsanleitung
Philips
Philips FC8768 Bedienungsanleitung
Philips
Philips FC8957 Bedienungsanleitung
Philips
Philips fc8917 Bedienungsanleitung
Philips
Philips FC8443 Bedienungsanleitung
Philips
Philips FC8404 Bedienungsanleitung
Philips
Philips FC8087/01 Bedienungsanleitung
Philips
Philips FC6148 Bedienungsanleitung
Philips
Philips Mobilo HR 8501 Bedienungsanleitung
Philips
Philips FC6091/01 Bedienungsanleitung
Philips
Philips Specialist Bedienungsanleitung
Philips
Philips Performer Active FC8657/01 Bedienungsanleitung
Beliebte Staubsauger Handbücher anderer Marken
Bissell
Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung
Panasonic
Panasonic MC-YL637S147-AE Bedienungsanleitung
NEFF
NEFF N17XH10 0 Series Bedienungsanleitung
LG
LG A9 Series Bedienungsanleitung
Oreck
Oreck Cordless Captura BK51700 Series Bedienungsanleitung
Kogan
Kogan KAVACROBVWA Bedienungsanleitung
