Philips SmartPro Active Bedienungsanleitung

FC8832

English 6

Deutsch 28

Italiano 51

Wheels stuck

ݓઁሂTopcover or dust container not placed properly

רۆࠋࠦӧ๥໇٦ݾBumper stuck

ߓԎሑᇆሂRobot lifted up from ﬂoor

՚ֽϴุఓᇊୃስײᆋ༏ӧచColour of ﬂoor too dark

ֽϴဂ೨ขτBattery not inserted properly/ Charging error (switch is oﬀ)

׌ԁ໇ሑݾԍ׌մ༆Ĳܵၜܵтĳ

English

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit

from the support that Philips offers, register your product at

www.philips.com/welcome.

General description

1 Handle of dust container lid

2 Dust container lid

3 Filter

4 Dust container

5 Top cover

6 Error code table

7 Fan

8 Bumper

9 Docking station sensor

10 Display

11 Front wheel

12 Side brush shafts

13 Drop-off sensors

14 Wheels

15 TriActive XL nozzle

16 Side brushes

17 Fixation blocks for dry wipes

18 Dry wipe holder

19 Dry wipes

20 AA batteries for invisible wall

21 Invisible wall

22 Docking station

23 Adapter

24 Small plug

Display

1110 129

5 6 7 8

1 Spiral mode indicator

2 Wall-following mode indicator

3 Zigzag pattern mode indicator

4 Random mode indicator

5 Cleaning time

6 Docking icon

7 WiFi icon

8 Sound sensor

9 Dust container-full indicator

10 Mode selection button

11 Start/stop button

12 WiFi button

6English

How your robot works

What your robot cleans

This robot is equipped with features that make it a suitable cleaner to help

you clean the floors in your home.

The robot is especially suitable for cleaning hard floors, such as wooden,

tiled or linoleum floors. It may experience problems cleaning soft floors,

such as carpet or rugs. If you use the robot on a carpet or rug, please stay

close by the first time to see if the robot can deal with this type of floor.

Because the robot uses infrared sensors to navigate, it may run into

difficulties on very dark and shiny floors. If you use the robot on such

surfaces, please stay close by the first time to see if the robot can deal with

such a dark and shiny floor.

How your robot cleans

Cleaning system

The robot has a 3-stage cleaning system to clean your floors efficiently.

-The two side brushes help the robot clean in corners and along walls.

They also help to remove dirt from the floor and move it towards the

suction opening.

-The suction power of the robot picks up loose dirt and transports it

through the suction opening into the dust container.

-The robot comes with a dry wipe holder that allows you to clean your

hard floor even more thoroughly with dry wipes.

Cleaning patterns

In its auto cleaning mode, the robot uses a fixed and automatic sequence of

cleaning patterns to clean each area of the room optimally. It uses a Z-

pattern (zigzag pattern), random pattern, wall-following pattern and spiral

pattern successively. It continues to move in this sequence of patterns to

clean the room until the rechargeable battery runs low, or until it is switched

off manually.

English

If the robot detects a particularly dirty area during its cleaning run, it

switches to spiral mode and switches to turbo fan speed to ensure thorough

dirt removal.

Note: You can also select each mode individually in the app (see 'Cleaning

mode selection').

How your robot avoids height differences

The robot has three drop-off sensors in its bottom. It uses these drop-off

sensors to detect and avoid height differences such as staircases.

Note: It is normal for the robot to move slightly over the edge of a height

difference, as its front drop-off sensor is located behind the bumper.

Caution: In some cases, the drop-off sensors may not detect a staircase or

other height difference in time. Therefore monitor the robot carefully the

first few times you use it, and when you operate it near a staircase or

another height difference. It is important that you clean the drop-off

sensors regularly to ensure the robot continues to detect height

differences properly (see 'Cleaning the robot').

Mounting the side brushes

1Unpack the side brushes and place the robot upside down on a table or

on the floor.

2Push the side brushes onto the shafts on the bottom of the robot.

Note: Make sure you attach the side brushes properly. Press them onto

the shaft until you hear them lock into position with a click.

8English

Preparing for use

Installing the docking station

1Insert the small plug of the adapter into the socket on the docking station

(1) and insert the adapter into the wall socket (2).

-The display of the docking station comes on.

2Place the docking station on a horizontal, level floor against the wall.

100cm 30cm

80cm

Note: Make sure that there are no obstacles or height differences 80 cm

in front, 30 cm to the right and 100 cm to the left of the docking station.

Tip: To ensure the docking station stays firmly in the selected spot, fasten

it to the wall with screws or with two strips of double-sided tape.

Important note: deep sleep mode

In deep sleep mode, the robot does not respond at all when you press a

button. To reactivate the robot when it is in deep sleep mode:

1Press the start/stop button on the robot for one second to switch the

robot from deep sleep mode to standby mode.

2Press the start/stop button on the robot briefly or press the start button

in the app to start cleaning.

3If the robot does not start cleaning, place it on the plugged-in docking

station to recharge its rechargeable battery.

3 sec.

The robot enters deep sleep mode when you press the start/stop button for

3 seconds. It may also enter the deep sleep mode when its battery is empty.

The battery may, for instance, run empty if the robot is unable to find its

docking station.

Note: You cannot get the robot out of its deep sleep mode with the

start/stop button in the app, press the start/button on the robot.

English

Charging

When charging for the first time and when the rechargeable battery of the

robot is empty, the charging time is four hours. Your robot can only be

charged on the docking station.

Charging on the docking station

1Place the robot on the plugged-in docking station.

2The start/stop button starts flashing. The charging indicator will be visible

on the display during the first 3 minutes of charging.

3When the rechargeable battery is fully charged, the start/stop button

lights up continuously.

Charging automatically during use

1When the robot has finished cleaning or when only 15% of the battery

power remains, it automatically searches for the docking station to

recharge. When the robot searches for the docking station, the light in the

start/stop button turns orange.

2When the rechargeable battery is fully charged, the start/stop button

lights up continuously.

Note: The robot only searches for the docking station automatically when it

started cleaning from the docking station.

10 English

WiFi connection and app

Operating system requirements

Minimum requirements regarding operating systems:

-iOS: 11 or higher

-Android: 5.0 or higher

WiFi specifications

-The robot is designed to be connected to standard consumer routers

that use WEP, WPA-PSK, WPA2-PSK encryption keys, or no encryption

(open WiFi network).

-Connecting the robot to public hotspots, office networks or hotel

networks is not possible in most cases.

-The robot will not work with 5 GHz routers. If you encounter problems

with connecting the robot to the router, please check if your router can

also be changed to the 2.4 GHz setting.

Connecting WiFi router and robot

1When you take the robot out of the box, the WiFi icon starts to flash

orange.

-When the WiFi icon turns solid blue, the robot is connected to the WiFi

router.

2If there is no connection between the robot and the WiFi router, check if

there is an active WiFi signal. If not, check if the WiFi router is working. If

there is a WiFi signal, start downloading the app and then connect app

and robot.

Downloading app and connecting app and robot

1Search for 'Clean Home+' in the Apple App Store or in the Google Play

Store.

2Download and install the Clean Home+ app.

English

3Open the app and press the 'Connect a New Device' button or press the

'+' button.

4Select 'SmartPro Robot Vacuum Cleaner' and follow the instructions in

the app.

5The app tells you when the robot is connected and ready to use.

6Press 'OK' to open the app.

7Press 'Start cleaning' to start the robot. You can press 'Return to charging

base' to make the robot return to its docking station.

What to do if connecting app to robot fails

The app will tell you what to do if connection fails.

If you are still unable to connect the app to the robot with the instructions in

the app, start all over again with pressing the 'Connect a New Device' button

or pressing the '+' button.

If you continue to have problems with connecting the robot to the app,

contact the Philips Consumer Care Center in your country or go to

www.philips.com/support.

12 English

Andere Handbücher für SmartPro Active

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Philips Staubsauger Handbücher

Philips

Philips FC7070/01 Bedienungsanleitung

Philips

Philips MiniVac FC6132 Bedienungsanleitung

Philips

Philips Triathlon Bedienungsanleitung

Philips

Philips Bruce FC6093 Bedienungsanleitung

Philips

Philips HR6836 Bedienungsanleitung

Philips

Philips City Series Bedienungsanleitung

Philips

Philips FC6409/61 Bedienungsanleitung

Philips

Philips FC9302/01 Bedienungsanleitung

Philips

Philips HR 8569 Bedienungsanleitung

Philips

Philips FC8740 Bedienungsanleitung

Philips

Philips FC9310/02 Bedienungsanleitung

Philips

Philips AirStar FC8220/01 Bedienungsanleitung

Philips

Philips HomeRun FC9910 Bedienungsanleitung

Philips

Philips FC8297 Bedienungsanleitung

Philips

Philips FC8148 Bedienungsanleitung

Philips

Philips City Line New York Bedienungsanleitung

Philips

Philips FC9239/01 Bedienungsanleitung

Philips

Philips HR8701/01 Bedienungsanleitung

Philips

Philips FC6120 Bedienungsanleitung

Philips

Philips FC6149 Bedienungsanleitung

Philips

Philips City Line Venice FC8424/02 Bedienungsanleitung

Philips

Philips FC9166 Bedienungsanleitung

Philips

Philips HR8897/02 Bedienungsanleitung

Philips

Philips FC8326 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung