Pilz PSSu K S 8DI 8DO 0.5 Bedienungsanleitung

PSSu K S 8DI 8DO 0.5

Operating Manual-22065-EN-09

}Decentralised system PSSuniversal I/O

Preface

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made

for internal purposes. Suggestions and comments for improving this documentation will be

gratefully received.

Source code from third-party manufacturers or open source software has been used for

some components. The relevant licence information is available on the Internet on the Pilz

homepage.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,

SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks

of Pilz GmbH & Co. KG in some countries.

SD means Secure Digital

Contents

Operating Manual PSSu K S 8DI 8DO 0.5

22065-EN-09 3

Section 1 Introduction 5

1.1 Validity of documentation 5

1.1.1 Retaining the documentation 5

1.1.2 Terminology: System environment A and B 5

1.2 Definition of symbols 6

Section 2 Overview 7

2.1 Module structure 7

2.2 Module features 7

2.3 Front view 8

Section 3 Safety 9

3.1 Intended use 9

3.2 Safety regulations 10

3.2.1 Use of qualified personnel 10

3.2.2 Warranty and liability 10

3.2.3 Disposal 10

Section 4 Function description 11

4.1 Block diagram 11

4.2 Module features 11

4.2.1 Input function description 11

4.2.2 Output function description 11

4.2.3 Integrated protection mechanisms 13

4.2.4 Reaction times 13

4.3 Configuration 13

4.3.1 Addresses in the process image 13

4.3.2 PSSu assignment in system environment B 13

Section 5 Installation 14

5.1 General installation guidelines 14

5.1.1 Dimensions 14

5.2 Install compact module 16

5.3 Install/uninstall connector 18

5.4 Install labelling bracket 20

Section 6 Wiring 21

6.1 General wiring guidelines 21

6.1.1 Connectors' mechanical connection 21

6.1.2 Connect/disconnect the cables 21

6.2 Terminal configuration 23

6.3 Connecting the module 25

6.3.1 Input connections 25

6.3.2 Output connections 26

Section 7 Operation 27

7.1 Messages 27

Contents

Operating Manual PSSu K S 8DI 8DO 0.5

22065-EN-09 4

7.2 Display elements 28

7.2.1 Display elements for module diagnostics 28

7.2.2 Display elements for input/output status 29

Section 8 Technical details 30

Section 9 Order reference 33

9.1 Product 33

9.2 Accessories 33

Introduction

Operating Manual PSSu K S 8DI 8DO 0.5

22065-EN-09 5

1 Introduction

1.1 Validity of documentation

This documentation is valid for the product PSSu K S 8DI 8DO 0.5. It is valid until new doc-

umentation is published.

This operating manual explains the function and operation, describes the installation and

provides guidelines on how to connect the product.

1.1.1 Retaining the documentation

This documentation is intended for instruction and should be retained for future reference.

1.1.2 Terminology: System environment A and B

The PSSu system can be used in two different system environments. The module's applic-

ation area is described in the chapter "Intended Use" of the manual.

The distinction is made between

}PSSu in system environment A

}PSSu in system environment B

The distinction is based on the application area of the PSSu system.

PSSu in system environment A may be used in the

}Decentralised system PSSu I/O

}Not in the automation system PSS 4000

PSSu in system environment B may be used in the

}Automation system PSS 4000, e.g. with

– Decentralised system PSSu I/O with SafetyNET p

– Control system PSSu PLC

– Control system PSSu multi

Introduction

Operating Manual PSSu K S 8DI 8DO 0.5

22065-EN-09 6

1.2 Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses

an immediate threat of serious injury and death and indicates preventive

measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could

lead to serious injury and death and indicates preventive measures that can

be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus

material damage, and also provides information on preventive measures

that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-

aged and also provides information on preventive measures that can be

taken. It also highlights areas within the text that are of particular import-

ance.

INFORMATION

This gives advice on applications and provides information on special fea-

tures.

Overview

Operating Manual PSSu K S 8DI 8DO 0.5

22065-EN-09 7

2 Overview

2.1 Module structure

The module combines the function unit (inputs or outputs) and connection levels in one

housing.

Wiring is via 10-pin or 30-pin connectors with spring-loaded terminals, which are plugged

into the connector strips on the module.

Details of the applicable connectors with spring-loaded terminals are available in the

chapter entitled “Intended Use”.

2.2 Module features

The product has the following features:

}8 Digital inputs

}8 Digital outputs

– Semiconductor technology

– Single-pole

– Positive-switching

– Current load capacity per output: 0,5 A

– Short circuit-proof

– Overload-proof

}LEDs for:

– Switch status of each input/output

– Module error

}2 x 10-pin connector strip

}For standard applications in system environment A and B

Accessories:

}Connector with spring-loaded terminals (necessary for operation)

}Labelling bracket

}Labelling strips (sheets)

Overview

Operating Manual PSSu K S 8DI 8DO 0.5

22065-EN-09 8

2.3 Front view

Key:

}1: Labelling strip with:

– 2D code

– Order Number

– Serial Number

– Hardware version number

}2: Name of compact module

}3: Connector strip X1 for connectors with spring-loaded terminals

}4: Connector strip X2 for connectors with spring-loaded terminals

}5: Labelling strip for connector strip X2

}6: Labelling strip for connector strip X1

}7: LEDs for status display and module diagnostics

Safety

Operating Manual PSSu K S 8DI 8DO 0.5

22065-EN-09 9

3 Safety

3.1 Intended use

The module may be used for standard applications in system environment A and B.

The module PSSu K S 8DI 8DO 0.5 may be used as a safety component in accordance

with the Lifts Directive 95/16/EC in accordance with the requirements of

EN81-1/2:1998+A3:2009, EN81-20:2015, EN81-50:2015, EN81-22:2014 and

EN115-1:2008+A1:2010.

The programmable safety system should be installed in a protected environment that meets

at least the requirements of pollution degree 2. Example: Protected inside space or control

cabinet with protection class IP54 and corresponding air conditioning.

The module provides type 1 inputs in accordance with IEC 61131-2. It may be used as an

input module for standard functions.

The module provides type 1 outputs in accordance with IEC 61131-2. It may be used to

switch:

}Resistive loads

}Inductive loads

}Capacitive loads

Intended use includes making the electrical installation EMC-compliant. Please refer to the

guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use

in an industrial environment. It is not suitable for use in a domestic environment, as this can

lead to interference.

The following is deemed improper use in particular:

}Any component, technical or electrical modification to the module

}Use of the module outside the areas described in this manual

}Any use of the module that is not in accordance with the technical details.

INFORMATION

The module is supported by

}PSSuniversal Configurator and PSSuniversal Assistant from version

1.8.1

}PAS4000 from Version 1.2.1

– We recommend that you always use the latest version (download

from www.pilz.com).

The PSSu K S 8DI 8DO 0.5 module may be used with the following connectors with spring-

loaded terminals:

}PSSu A Con 1/10 C

}PSSu A Con 3/30 C

Safety

Operating Manual PSSu K S 8DI 8DO 0.5

22065-EN-09 10

WARNING!

The module may not be used in combination with PSSu E F BSW(-T) mod-

ules in safety-related applications.

3.2 Safety regulations

3.2.1 Use of qualified personnel

The products may only be assembled, installed, programmed, commissioned, operated,

maintained and decommissioned by competent persons.

A competent person is a qualified and knowledgeable person who, because of their train-

ing, experience and current professional activity, has the specialist knowledge required. To

be able to inspect, assess and operate devices, systems and machines, the person has to

be informed of the state of the art and the applicable national, European and international

laws, directives and standards.

It is the company’s responsibility only to employ personnel who

}Are familiar with the basic regulations concerning health and safety / accident preven-

tion,

}Have read and understood the information provided in this description under "Safety"

}Have a good knowledge of the generic and specialist standards applicable to the spe-

cific application.

3.2.2 Warranty and liability

All claims to warranty and liability will be rendered invalid if

}The product was used contrary to the purpose for which it is intended

}Damage can be attributed to not having followed the guidelines in the manual

}Operating personnel are not suitably qualified

}Any type of modification has been made (e.g. exchanging components on the PCB

boards, soldering work etc.).

3.2.3 Disposal

}In safety-related applications, please comply with the mission time TM in the safety-re-

lated characteristic data.

}When decommissioning, please comply with local regulations regarding the disposal of

electronic devices (e.g. Electrical and Electronic Equipment Act).

Inhaltsverzeichnis

Andere Pilz E/A-System Handbücher

Pilz

Pilz PSSu H F PN o Bedienungsanleitung

Pilz

Pilz PSSu E F INC Bedienungsanleitung

Pilz

Pilz PSSuniversal PSSu E F ABS SSI Bedienungsanleitung

Pilz

Pilz PSS u2 EF 2DO R 8A Bedienungsanleitung

Pilz

Pilz PSSu E F AI U Bedienungsanleitung

Pilz

Pilz PSS u2 P0 F/S EIP Bedienungsanleitung

Pilz

Pilz PSSu E S 2DOR 2 Bedienungsanleitung

Pilz

Pilz PSSu E S ABS SSI Bedienungsanleitung

Pilz

Pilz PSS u2 ES 4DID Bedienungsanleitung

Pilz

Pilz PSS u2 ES 16DI Bedienungsanleitung

Pilz

Pilz PSS u2 ES 4DOD 0.5A Bedienungsanleitung

Pilz

Pilz PSSu E F PS Bedienungsanleitung

Pilz

Pilz PSSu E S 2AI U Bedienungsanleitung

Pilz

Pilz PSS u2 Bedienungsanleitung

Pilz

Pilz PSSu E S 2AO U Bedienungsanleitung

Pilz

Pilz PSSu E F PS-P Bedienungsanleitung

Pilz

Pilz PSSu E F PS Bedienungsanleitung

Pilz

Pilz PSS u2 ES 4DOD 2A Bedienungsanleitung

Pilz

Pilz PSS u2 ES 8DOD 0.5A Bedienungsanleitung

Pilz

Pilz PDP67 F 8DI ION PT Bedienungsanleitung

Pilz

Pilz PSSu H S PN Bedienungsanleitung

Pilz

Pilz PSS u2 P0 F/S EIP Bedienungsanleitung

Pilz

Pilz PSS u2 ES 16PT 0V Bedienungsanleitung

Pilz

Pilz PSSu K F INC Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung