Pro-face PS-3700A Bedienungsanleitung

Compact Panel Computer

PS-3700A

(EdenTM

ESP6000-667MHzModel)

User Manual

Introduction

The PS-3700A (EdenTM ESP6000-667MHz Model) (PS-A) of Compact Panel Computers are multipurpose factory auto-

mation (FA) computers, which embody Pro-face’s latest, cost-effective architecture. Before using the PS-A, read this

manual thoroughly to familiarize yourself with the PS-A’s operation procedures and functions.

Product names used in this manual are the trademarks of their respective manufacturers.

NOTE

1. It is forbidden to copy the contents of this manual in whole, or in part, without the permission of the Digital Elec-

tronics Corporation.

2. The information in this manual is subject to change without notice.

3. This manual was written with care; however, if you should find any error or omissions, please contact Digital

Electronics Corporation and inform them of your findings.

4. Regardless of the above clause, Digital Electronics Corporation shall not be held responsible for any damages or

third-party claims for damages or losses resulting from the use of this product.

Essential Safety Precautions

This manual includes the following cautions concerning procedures that must be followed to operate the PS-A correctly

and safely. Prior to operating the PS-A, be sure to read this manual and any related materials thoroughly to understand the

correct operation and functions of this unit.

Safety Icons

To allow you to use the PS-A correctly, throughout this manual, the following icons are provided next to operations

requiring special attention. These icons are used to describe the following situations:

Failure to fully comply with points indicated by this symbol may result in death or

serious injury.

Failure to fully comply with points indicated by this symbol may result in injury or

equipment damage.

Indicates actions or procedures that should NOT be performed.

Indicates actions or procedures that MUST be performed to ensure proper opera-

tion.

To avoid the possibility of an electric shock, be sure to disconnect the power cord to the PS-A before con-

necting it to the main power supply.

A fire or electrical shock may occur if voltages used with the PS-A are beyond the specified range. Be

sure to use only the specified voltage.

Before opening the PS-A’s protective cover, be sure to turn the unit's power OFF. This is because the PS-

A's internal parts carry high voltages.

To avoid fires or electrical hazards, do not modify the PS-A in any way.

Do not create touch panel switches that are used to either control or to ensure the safety of equipment

and personnel. Mechanical switches, such as an emergency stop switch, a deadman (two-handed) start

switch, etc., must be installed and operated via a separate control system.

Do not create touch panel switches which could possibly endanger the safety of humans and equipment.

This is due to the possibility of a malfunction in the PS-A or its cable(s), causing the output of a signal that

could result in a major accident. All of a system's major, safety-related switches should be designed to be

operated separately from the PS-A.

After the PS-A’s backlight burns out, unlike the PS-A’s “Standby Mode”, the touch panel is still active. If the

operator fails to notice that the backlight is burned out and touches the panel, a potentially dangerous

machine operation error can occur.

If your PS-A’s backlight suddenly turns OFF, use the following steps to determine if the backlight is actu-

ally burned out.

1) If your PS-A is not set to “Standby Mode” and the screen has gone blank, your backlight is burned out.

2) Or, if your PS-A is set to Standby Mode, but touching the screen does not cause the display to reap-

pear, your backlight is burned out.

If metal particles, water or other types of liquids contact any of the PS-A’s internal parts, immediately turn

the unit’s power OFF, unplug the power cord, and contact either your PS-A distributor or the Digital Elec-

tronics Corporation.

Read and understand Chapter 2 "Hardware Installation" thoroughly in order to select an appropriate instal-

lation location for the PS-A.

Before either plugging in or unplugging a board or interface connector, be sure to turn the PS-A’s power

OFF.

To prevent a possible explosion, do not install the PS-A in areas containing flammable gases.

The PS-A is not appropriate for use with aircraft control devices, aerospace equipment, central trunk data

transmission (communication) devices, nuclear power control devices, or medical life support equipment,

due to these devices’ inherent requirements of extremely high levels of safety and reliability.

When using the PS-A with transportation vehicles (trains, cars and ships), disaster and crime prevention

devices, various types of safety equipment, non-life support related medical devices, etc. redundant and/

or fail-safe system designs should be used to ensure the proper degree of reliability and safety.

Do not push on the PS-A’s screen too strongly, with either your finger or with a hard object. Excessive

pressure can scratch, crack or damage the screen. Also, do not use a pointed object, such as a mechani-

cal pencil or screwdriver, to press any of the touch panel's switches, since they can damage the display.

If the screen becomes dirty or smudged, moisten a soft cloth with diluted neutral detergent, wring the cloth

well, and wipe the display. Do not use thinner or organic solvents.

Avoid exposing the PS-A to, or operating the PS-A in direct sunlight, high temperatures and humidity, and

in areas where excessive dust and vibration will occur.

Avoid using the PS-A in areas where sudden, extreme changes in temperature can occur. This may cause

condensation to form inside the unit, possibly leading to an accident.

To prevent the PS-A from overheating, be sure its air circulation vents are clear and clean, and keep the

unit's operation area well-ventilated.

Avoid operating or storing the PS-A near chemicals, or where chemicals can come into contact with the

unit.

LCD Usage and Handling

• The PS-A’s LCD contains a strong irritant. If the panel is ever cracked and the LCD’s liquid contacts your skin, be sure

to wash it with running water for at least 15 minutes. If any of this liquid should enter your eye, be sure to flush your

eye with running water for more than 15 minutes and see a doctor as soon as possible.

• The brightness of the LCD screen will depend on the screen's current display and the LCD’s contrast adjustment. Any

brightness variations that result are normal for LCD displays.

• There are minute grid-points (Dark or Light points) on the LCD surface. These points are not defects and are a part of

the PS-A unit's design.

• The displayed color will look different when viewed from an angle outside the specified view angle. This is also nor-

mal.

• When installing this unit, be sure that the screen is viewable from within the designated viewing angles. The screen

image being difficult to see from outside its recommended viewing angle is normal.

• Displaying a single screen image for long periods of time can cause an afterimage to remain on the screen. To correct

this, turn the unit OFF for 5 to 10 minutes, then ON again. This phenomenon is a common attribute of LCD displays,

and is not a defect. To prevent this effect, you can:

1) Use the Display OFF feature; if the same image is to be displayed for a long period of time.

2) Change the screen display periodically to prevent the displaying of a single image for a long period of time.

When PS-A Hard Disk (HDD) data is lost:

The Digital Electronics Corporation cannot be held responsible or provide any compensation for dam-

age(s) caused by the loss of data stored in the PS-A’s hard disk drive (HDD). It is therefore strongly sug-

gested that all important data and software be backed up regularly to an external data backup device.

Please be aware that the Digital Electronics Corporation bears no responsibility for any damages resulting

from the customer's application of this unit's hardware or software.

Since the PS-A unit’s hard disk drive (HDD) is a consumable item, i.e. it has a limited lifetime, be sure to

back up its data regularly and prepare a spare HDD unit.

In order to extend the lifetime of the hard disk, Pro-face recommends you set the Windows [Control

panel]-[Power Management option]-[Turn off hard disks] selection to turn the hard disk off when the unit is

not being operated. A setting of 5 minutes is recommended.

To prevent file data damage, be sure to shut down the PS-A's OS before turning OFF the main power.

WAfter turning OFF the PS-A’s power, wait until the internal HDD stops spinning before turning on the

power again (approx. 5 seconds).

Information Symbols

This manual uses the following icons:

Indicates a warning or a product limitation. Be sure to follow the instructions given with

this icon to insure the safe operation of the PS-A.

Contains additional or useful information.

*Indicates terms or items that require further explanation. See the footnote on that page.

Indicates pages containing related information.

(1) (2) Indicates steps used to accomplish a given task.

Be sure to follow these steps in the order they are written.

PS-A Refers collectively to the Compact Panel Computers PS-3700A (EdenTM ESP6000-

667MHz Model) units.

SEE

Package Contents

The following items are included in the PS-A’s package. Before using the PS-A, please confirm that all items listed here

are present.

PS-A

(PS3700A-T41-ASU-E66) Moisture Resistant Gasket (1)

Installation Fasteners (4/set x 2) USB Cable Clamp (1)

AC Power Cord (1) AC Power Cord Clamp (1)

CD-ROM (1) Installation Guide (1)

(PS370XA-E66 User Manual & Driver CD) (Japanese/English)

This unit has been carefully packed, with special attention to quality. However, should you find anything dam-

aged or missing, please contact your local PS-A distributor immediately.

• Be careful when installing the PS-A not to damage the built-in HDD.

• The Power Cord included in the FP unit's package is designed only for AC100V

or AC115V use. Any other voltage will require a different cord.

• The CD-ROM included in this package contains a User Manual, API Reference Manual,

and PS-A Series Utility and Driver files.

Chapter 4 Setting up Your PS-A Unit (page4-1)

• When you order a PS-A unit built to your specifications, that PS-A package should

include each optional item's Installation Guide. Please use that guide to check the con-

tents of each optional item's package.

Installation

Guide

SEE

UL/c-UL (CSA) Application Notes

PS3700A-T41-ASU-E66 unit is UL/c-UL listed product (UL File No. E220851). Please pay special attention to the fol-

lowing instructions when applying for UL/c-UL approval for machinery which includes any of PS-A units.

The PS-A conforms as a component to the following standards:

UL508 Industrial Control Equipment

CAN Std C22.2 No.14-1995 CAN/CSA 22.2 No.60950

PS3700A-T41-ASU-E66 (UL Registration Model No.:3280015-01)

- Equipment with a PS-A unit mounted in it requires UL/c-UL evaluation for the combination of the PS-A and equip-

ment.

- The PS-A must be used as a built-in component of an end-use product.

- Use the PS-A indoors only.

- When connecting the PS-A’s power cord, be sure to use a cord that is appropriate for the current and voltage used and

that has conductive wires that are AWG18 or larger.

- Danger of explosion if backup battery is incorrectly replaced. Should be replaced only with same or equivalent type

recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

- Be sure the unit the PS-A is built into uses a UL508 compatible structure.

CE Marking Notes

PS3700A-T41-ASU-E66 unit is CE marked, EMC compliant product.

Safety

EN60950

EMI

EN61000-6-4, EN55011(Group 1, Class A)

EMS (EN61000-6-2/EN61131-2)

EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11,

EN61000-4-12

FCC

47 CFR Part 15 Class A

If the following requirements are not met, the PS-A may fail to meet EN60950 standard requirements.

• The PS-A must be used as a built-in component of an end-use product.

• Use the PS-A indoors only.

• When connecting the PS-A’s power cord, be sure to use a cord that is appropriate for the current and voltage used and

that has conductive wires that are AWG18 or larger.

• There is a danger of explosion if the backup battery is incorrectly replaced. This battery should be replaced only with

same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s

instructions.

• Be sure the PS-A unit’s enclosure is an EN60950 approved sheet steel structure.

Contents

Introduction................................................................................................................ 1

Essential Safety Precautions..................................................................................... 2

Information Symbols.................................................................................................. 5

Package Contents..................................................................................................... 6

UL/c-UL (CSA) Application Notes............................................................................. 7

CE Marking Notes..................................................................................................... 8

Contents.................................................................................................................... 9

CHAPTER 1 Overview

1.1 Prior to Operating the PS-A Unit.....................................................................1-2

1.2 PS-A Unit System Configuration.....................................................................1-3

1.2.1 Setting Up the Touch Panel Connection...............................................................1-4

1.2.2 Using the USB Interface (located on the front face) .............................................1-4

1.3 PS-A Unit Part Names and Features..............................................................1-5

1.4 Interfaces........................................................................................................1-7

1.4.1 RS-232C Interface (COM1/COM2/COM3/COM4)................................................1-7

1.4.2 Printer Interface (LPT1) ......................................................................................1-10

1.5 PS-A Unit External Views and Dimensions................................................... 1-11

1.5.1 PS-A Unit............................................................................................................1-11

1.5.2 External Dimensions (with Installation Fasteners installed)................................1-12

1.5.3 Panel Cut Dimensions ........................................................................................1-13

1.5.4 Installation Fasteners..........................................................................................1-13

CHAPTER 2 Hardware Installation

2.1 Installtion.........................................................................................................2-2

2.1.1 Removing the PS-A Unit's Cover..........................................................................2-2

2.1.2 PS-A Internal View................................................................................................2-3

2.1.3 Main Memory Installation......................................................................................2-4

2.1.4 Expansion Board (PCI) Installation.......................................................................2-4

2.1.5 PCMCIA Unit Installation ......................................................................................2-6

2.1.6 USB Cable Clamp Installation...............................................................................2-7

2.1.7 CF Card Installation and Removal........................................................................2-8

2.2 Installing the PS-A Unit.................................................................................2-10

2.2.1 Installation Caution .............................................................................................2-10

2.2.2 Installation Procedures .......................................................................................2-12

Andere Handbücher für PS-3700A

Inhaltsverzeichnis

Andere Pro-face Touchscreen Handbücher

Pro-face

Pro-face GP3000 Series Bedienungsanleitung

Pro-face

Pro-face GP3000 Series Betriebsanleitung

Pro-face

Pro-face SP5000 Series Bedienungsanleitung

Pro-face

Pro-face GP4000 SERIES Bedienungsanleitung

Pro-face

Pro-face PL-7900 Series Bedienungsanleitung

Pro-face

Pro-face PL-5900 Series Bedienungsanleitung

Pro-face

Pro-face PS-3700A Bedienungsanleitung

Pro-face

Pro-face GP4104G1D Bedienungsanleitung

Pro-face

Pro-face FP-3710K Series Bedienungsanleitung

Pro-face

Pro-face GP3000 Series Bedienungsanleitung

Pro-face

Pro-face PS-3600G Series Bedienungsanleitung

Pro-face

Pro-face GP-2500 Series Bedienungsanleitung

Pro-face

Pro-face PL-6920 Series Bedienungsanleitung

Pro-face

Pro-face PS300-BU00 Stücklistenhandbuch

Pro-face

Pro-face PS-A Series Bedienungsanleitung

Pro-face

Pro-face FP2600-T41 Bedienungsanleitung

Pro-face

Pro-face AGP3200-A1-D24 Bedienungsanleitung

Pro-face

Pro-face FP2600-T11 Bedienungsanleitung

Pro-face

Pro-face GP-3400 Series Bedienungsanleitung

Pro-face

Pro-face PS-3650A Series Bedienungsanleitung

Pro-face

Pro-face GP-577R Series Bedienungsanleitung

Pro-face

Pro-face GP37W2-BG41-24V Bedienungsanleitung

Pro-face

Pro-face GP-377RT Bedienungsanleitung

Pro-face

Pro-face PFXGP4502WADW Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung