Radio Shack Caller ID System 1500 Bedienungsanleitung

Cat. No. 43-976

OWNER’S MANUAL

Please read before using this equipment.

Caller ID System 1500

Telephone with 3-Memory Speed-Dialing

43-976.fm Page 1 Monday, August 16, 1999 4:38 PM

FEATURES

Your RadioShack Caller ID System

1500 Telephone with 3-Memory

Speed-Dialing combines a telephone

and a Caller ID unit in one system.

The System 1500 displays the caller’s

telephone number (and name, if avail-

able in your area) and the current

time, as provided by your local tele-

phone company to Caller ID service

subscribers.

Important Information:

• To use the telephone’s Caller ID

feature, you must be in an area

where Caller ID service is avail-

able and you must subscribe to

the service.

• The telephone displays the

caller’s name only if this feature is

available in your area.

Your telephone includes these fea-

tures:

Caller ID Memor

— stores and

displays up to 19 incoming records

(phone number only) or up to 7 incom-

ing records (name and phone num-

ber).

Read Button — lets you easily view

all call information, such as name and

time of the call.

Displa

Scrollin

— lets you shift the

display left or right so you can see

caller information that will not fit on the

display at one time.

Review Scrollin

— lets you scroll

through all call records in Caller ID

memory.

Caller ID Memor

Dialin

— lets you

select a stored phone number from

Caller ID memory, then dial it with the

touch of a button.

Three-Memor

Speed Dialin

— lets

you quickly dial important numbers.

Last Number Redial — lets you

quickly dial the last number dialed.

Clock — displays the current time as

provided to Caller ID service subscrib-

ers by your local telephone company.

Rin

er Switch — lets you adjust the

phone’s ringer volume to low, high, or

off.

Pulse/Tone Option — lets you use

your phone with pulse or tone service

and lets you easily switch from pulse

to tone dialing for long-distance, bank-

by-phone, or other special services.

Hearin

-Aid Compatible — lets you

use the telephone with hearing aids

that have a T (telephone) switch.

Note: To protect the information

stored in memory, your telephone re-

quires four AA batteries (not supplied).

RadioShack is a trademark used by Tandy Corporation.

43-976.fm Page 2 Monday, August 16, 1999 4:38 PM

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

For your records, we recommend you

record the phone’s serial number

here. The number is on the bottom of

the phone.

Serial Number: __________________

READ THIS BEFORE

INSTALLATION

We have designed your phone to con-

form to federal regulations and you

can connect it to most phone lines.

However, each device that you con-

nect to the telephone line draws pow-

er from the line. We refer to this power

draw as the phone’s Ringer Equiva-

lence Number (REN). The REN is

shown on the bottom of your phone.

If you use more than one phone or

other device on the line, add up all the

RENs. If the total is more than five,

your phones might not ring. In rural ar-

eas, a total REN of three might impair

ringer operation. If ringer operation is

impaired, remove one of the devices

from the line.

This symbol is intended to alert you

to the presence of uninsulated dan-

gerous voltage within the product’s

enclosure that might be of sufficient

magnitude to constitute a risk of

electric shock. Do not open the

product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are in-

cluded in the literature accompany-

ing this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

Warning: To prevent fire or shock

hazard, do not expose this product

to rain or moisture.

CAUTION

43-976.fm Page 3 Monday, August 16, 1999 4:38 PM

FCC STATEMENT

Your telephone complies with Part 68

FCC Rules

. Upon request, you

must provide the phone’s FCC regis-

tration number and REN to your

telephone company. These numbers

are shown on the bottom of the phone.

Note: You must not connect your tele-

phone to:

• Coin-operated systems

• Party-line systems

• Most electronic key phone sys-

tems

The telephone also complies with the

limits for a Class B device as specified

in Part 15 of

FCC Rules

. These limits

provide reasonable protection against

radio and TV interference in a residen-

tial area. However, your telephone

might cause TV or radio interference

even when it is operating properly. To

eliminate interference, you can try one

or more of the following corrective

measures.

• Reorient or relocate the TV’s

receiving antenna.

• Increase the distance between the

telephone and the radio or TV.

Consult your local RadioShack store if

the problem still exists.

43-976.fm Page 4 Monday, August 16, 1999 4:38 PM

CONTENTS

Installation ............................................................................................................ 6

Installing Batteries ........................................................................................... 6

Resetting the Telephone ................................................................................. 7

Making the Connections ................................................................................. 7

Installing the Phone on a Desk ................................................................. 7

Wall-Plate Mounting .................................................................................. 8

Direct Wall Mounting ................................................................................. 9

Connecting the Handset ......................................................................... 10

Preparation ......................................................................................................... 11

Setting the Ringer Switch .............................................................................. 11

Setting the Dialing Mode ............................................................................... 11

Storing an Area Code ................................................................................... 12

Operation ............................................................................................................ 13

Receiving a Call ............................................................................................ 13

Reviewing Call Records ................................................................................ 13

Caller ID Display Information .................................................................. 14

Storing Numbers in Memory ......................................................................... 16

Quick-Storing a Caller’s Phone Number ................................................. 16

Making a Call ................................................................................................ 17

Redialing ................................................................................................. 17

Memory Dialing ....................................................................................... 17

Dialing Caller ID Numbers ...................................................................... 17

Using Tone Services on a Pulse Line ........................................................... 17

Care and Maintenance ...................................................................................... 18

The FCC Wants You to Know ....................................................................... 19

Lightning ....................................................................................................... 19

43-976.fm Page 5 Monday, August 16, 1999 4:38 PM

INSTALLATION

Follow this sequence to insure your

phone will work properly.

• Install batteries (see “Installing

Batteries”).

• Reset the phone (see “Resetting

the Telephone” on Page 7).

• Make the phone connections (see

“Making the Connections” on

Page 7).

If your phone does not work, discon-

nect it from the phone line, remove the

batteries, then repeat the above

sequence.

INSTALLING BATTERIES

Your phone requires four AA batteries

(not supplied) to protect its memory.

For the best performance and longest

life, we recommend alkaline batteries,

such as RadioShack Cat. No. 23-552.

Follow these steps to install batteries.

Cautions:

• Use only fresh batteries of the

required size and type.

• Do not mix old and new batteries,

different types of batteries (stan-

dard, alkaline, or rechargeable),

or rechargeable batteries of differ-

ent capacities.

• Never leave dead or weak batter-

ies in the phone.

• Dispose of old batteries promptly;

do not bury or burn them.

1. Remove the phone stand by

pressing the two tabs on the stand

then pulling it off.

2. Using a flat-blade screwdriver,

remove the battery compartment

cover’s screw on the bottom of the

phone and remove the cover.

3. Place four fresh AA batteries in

the battery compartment as indi-

cated by the polarity symbols (+

and –) marked inside.

43-976.fm Page 6 Monday, August 16, 1999 4:38 PM

4. Replace the cover and secure it

with the screw.

Note: The telephone automatically

tests the batteries each time it

receives a call. If appears on the

display or the display dims, replace

the batteries.

Important: When you replace the bat-

teries, have fresh batteries on hand

before you begin. You must install

fresh batteries within 2 minutes after

removing the old batteries. Otherwise,

you might lose all the information

stored in the phone’s memory.

RESETTING THE

TELEPHONE

Before you use the telephone the first

time, or to clear all the stored informa-

tion from the telephone at any time,

press RESET using a pointed object,

such as a straightened paper clip.

Note: Immediately after resetting the

telephone, 12--00 AM appears on

the display until you receive a call.

Then the telephone company auto-

matically sends the correct time to

update your phone’s time display.

MAKING THE

CONNECTIONS

Your System 1500 connects to a mod-

ular phone jack. Choose a location for

your phone that is near a modular

phone jack and away from normal ac-

tivities. You can place it on a desk or

mount it on a wall plate or directly on a

wall.

If your telephone wiring does not have

a modular phone jack, you can update

the wiring yourself. RadioShack stores

sell the necessary jacks and adapters

to convert older wiring methods to

modular wiring. Or, you can have the

telephone company update your tele-

phone wiring for you.

Note: The USOC number of the jack

to be installed is RJ11C for a base-

board jack, or RJ11W for a wall jack.

Installing the Phone on a

Desk

1. Plug one end of the supplied long

modular cord into the TEL. LINE

jack on the phone.

2. Plug the other end of the modular

cord into the modular phone jack.

43-976.fm Page 7 Monday, August 16, 1999 4:38 PM

3. To have the phone tilt slightly for-

ward, insert the tabs on the nar-

row end of the stand into the

matching slots near the bottom of

the phone. Then snap the stand

into place by pressing in the two

tabs toward the top of the phone.

4. Place the phone on a desk.

Wall-Plate Mounting

1. Plug one end of the supplied short

modular phone cord into the TEL.

LINE jack on the phone.

2. Route the cord through the groove

on the back of the phone.

3. Insert the tabs on the narrow end

of the stand into the matching

slots near the top of the phone,

making sure the cord is routed

through the opening in the stand.

Then snap the stand into place by

pressing in the two tabs toward

the bottom of the phone.

4. Plug the other end of the supplied

short modular phone cord into the

modular phone jack in the wall

plate.

43-976.fm Page 8 Monday, August 16, 1999 4:38 PM

5. Align the phone stand’s keyhole

slots with the studs on the wall

plate and slide the phone down

until it snaps into place.

Direct Wall Mounting

You can mount the phone directly on

the wall using two screws (not sup-

plied).

Note: Make sure the screw’s heads fit

the phone stand’s keyhole slots.

1. Drill two holes, one above the

other, 31/4inches apart, then

thread the screws into the holes

until the heads extend about 1/8

inch from the wall.

2. Plug one end of the supplied long

modular phone cord into the TEL.

LINE jack on the phone.

3. Route the cord through the groove

on the back of the phone.

4. Insert the tabs on the narrow end

of the stand into the matching

slots near the top of the phone,

making sure the cord is routed

through the opening in the stand.

Then snap the stand into place by

pressing in the two tabs toward

the bottom of the phone.

43-976.fm Page 9 Monday, August 16, 1999 4:38 PM

5. Plug the other end of the modular

phone cord into a modular phone

jack.

6. Align the phone stand’s keyhole

slots with the screw heads and

slide the phone down until it snaps

into place.

Connecting the Handset

1. Plug one end of the supplied

coiled cord into the modular jack

on the side of the phone, and the

other end into the modular jack on

the handset.

Note: RadioShack stores sell

longer coiled handset cords,

which are especially useful when

you wall-mount the phone.

2. If you installed the phone on a

desk, simply place the handset in

the cradle.

If you mounted the phone on the

wall, slide out and rotate the hand-

set holder so you can hang the

handset on the base.

Note: You can place the handset

on the holder above the regular

handset holder. This gives you a

convenient place to temporarily

hang the handset without discon-

necting the call.

43-976.fm Page 10 Monday, August 16, 1999 4:38 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-598 Bedienungsanleitung

Radio Shack

Radio Shack ET-1105 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack 43-3817 Bedienungsanleitung

Radio Shack

Radio Shack ET-551 Bedienungsanleitung

Radio Shack

Radio Shack 43-3820 Bedienungsanleitung

Radio Shack

Radio Shack TAD-734 Bedienungsanleitung

Radio Shack

Radio Shack ET-1111 Bedienungsanleitung

Radio Shack

Radio Shack 43-143 Bedienungsanleitung

Radio Shack

Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital... Bedienungsanleitung

Radio Shack

Radio Shack TAD-268 Bedienungsanleitung

Radio Shack

Radio Shack 43-3704 Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack 43-5560 Bedienungsanleitung

Radio Shack

Radio Shack 43-325 Bedienungsanleitung

Radio Shack

Radio Shack ET-689 Bedienungsanleitung

Radio Shack

Radio Shack ET-687 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Telephone Bedienungsanleitung

Radio Shack

Radio Shack 43-3535 Bedienungsanleitung

Radio Shack

Radio Shack ET-1106 Bedienungsanleitung

Radio Shack

Radio Shack TAD-729 Bedienungsanleitung

Radio Shack

Radio Shack 43-3529 Bedienungsanleitung

Radio Shack

Radio Shack RT-551 Bedienungsanleitung

Radio Shack

Radio Shack 43-5829 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung