Radio Shack CID-927 Bedienungsanleitung

Cat. No. 43-927

OWNER’S MANUAL

CID-927

Please read before using this equipment.

Fashion Caller ID Phone

with 64-Memory Caller ID

43-927.fm Page 1 Thursday, June 24, 1999 9:36 AM

FEATURES

Your RadioShack CID-927 Fashion Call-

er ID Phone is a telephone that also

shows the caller’s telephone number

(and name, if available in your area) and

the date and time of each call, as provid-

ed by your local telephone company to

Caller ID service subscribers.

Your CID-927 has these features:

Caller ID Memory — stores up to 64

Caller ID records.

Priority Memory Dialing — lets you

store three priority memory numbers

and call them with the touch of a button.

3-Line Liquid Crystal Display — lets

you view an entire caller ID record on

one screen.

New Call Counter — shows the number

of new calls you have received.

Review Scrolling — lets you easily

scroll through all records in Caller ID

memory.

DELETE Button — lets you erase call

records one at a time or all at once.

Trilingual Caller ID Messages — dis-

plays in English, Spanish, or French.

Message Waiting — lets you know that

you have received a voice mail message

(if you subscribe to a message service

from your local phone company).

Contrast Control — lets you adjust the

display’s contrast to match your prefer-

ence.

Redial — lets you quickly redial the last

number dialed.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Adjustable Ringer Volume — lets you

set the ringer’s volume to low, high, or

off.

Tone/Pulse Dialing — lets you use ei-

ther type of service, and easily switch

from pulse to tone dialing for special ser-

vices (such as bank-by-phone).

Hearing-Aid Compatible — lets you

use the telephone with hearing aids that

have a T (telephone) switch.

This phone has been tested and found

to comply with all applicable UL and

FCC standards.

RadioShack is a registered trademark used by Tandy Corporation.

43-927.fm Page 2 Thursday, June 24, 1999 9:36 AM

IMPORTANT CALLER ID

INFORMATION

To use the CID-927’s Caller ID feature,

you must be in an area where Caller ID

service is available and you must sub-

scribe to the service.

Where Caller ID is offered, one or more

of the following options are generally

available:

• caller’s number only

• caller’s name only

• caller’s name and number

READ THIS BEFORE

INSTALLATION

We have designed your CID-927 to con-

form to federal regulations, and you can

connect it to most telephone lines. How-

ever, each telephone (and each device,

such as an answering machine) that you

connect to the telephone line draws

power from the telephone line. We refer

to this power draw as the device’s ringer

equivalence number, or REN. The REN

is on the bottom of your telephone.

If you use more than one telephone or

other device on the line, add up all the

RENs. If the total is more than five, your

telephones might not ring. In rural areas,

a total REN of three might impair ringer

operation. If ringer operation is impaired,

remove one of the devices from the line.

FCC STATEMENT

Your CID-927 complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC registration number

and REN to your telephone company.

Both numbers are on the bottom of the

CID-927.

Note: You must not connect your CID-

927 to:

• coin-operated systems

• party-line systems

• most electronic key phone systems

WARNING:To reduce the risk of fire or shock

hazard, do not expose this product to rain or

moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

43-927.fm Page 3 Thursday, June 24, 1999 9:36 AM

The CID-927 also complies with the lim-

its for a Class B device as specified in

Part 15 of

FCC Rules

. These limits pro-

vide reasonable protection against ra-

dio and TV interference in a residential

area. However, your telephone might

cause TV or radio interference even

when it is operating properly. To elimi-

nate interference, you can try one or

more of the following corrective mea-

sures.

• Reorient or relocate the TV’s receiv-

ing antenna.

• Increase the distance between the

telephone and the radio and TV.

Consult your local RadioShack store if

the problem still exists.

43-927.fm Page 4 Thursday, June 24, 1999 9:36 AM

CONTENTS

Preparation .............................................................................................................. 6

Installing Batteries............................................................................................... 6

Connecting the Phone ........................................................................................ 7

Connecting the Handset ..................................................................................... 7

Setting the Dialing Mode .................................................................................... 7

Setting the Ringer’s Volume ............................................................................... 7

Setting the Display Language ............................................................................ 8

Setting the Date and Time .................................................................................. 8

Adjusting the Display Contrast ........................................................................... 8

Phone Operation ..................................................................................................... 9

Using Redial ....................................................................................................... 9

Using Flash ........................................................................................................ 9

Using Tone Services on a Pulse Line ................................................................. 9

Storing and Dialing Priority Numbers ................................................................. 9

Testing Stored Emergency Numbers ......................................................... 10

Chain-Dialing ............................................................................................. 10

Using the Index Card ........................................................................................ 10

Caller ID Operation ............................................................................................... 11

Caller ID Messages .......................................................................................... 11

Reviewing Caller ID Records ............................................................................ 12

Deleting Caller ID Records ............................................................................... 12

Troubleshooting .................................................................................................... 13

Care and Maintenance .......................................................................................... 14

The FCC Wants You to Know ........................................................................... 15

Lightning ........................................................................................................... 15

43-927.fm Page 5 Thursday, June 24, 1999 9:36 AM

PREPARATION

INSTALLING BATTERIES

Your CID-927 requires four AAA batter-

ies (not supplied) to store and display

Caller ID records. For the best perfor-

mance, we recommend alkaline batter-

ies, available at your local RadioShack

store.

Cautions:

• Use only fresh batteries of the

required size and recommended

type.

• Do not mix old and new batteries,

different types of batteries (stan-

dard, alkaline, or rechargeable), or

rechargeable batteries of different

capacities.

Follow these steps to install batteries.

Note: When replacing the batteries, in-

stall the new ones within 2 minutes, or

the CID-927’s date and time will be lost.

(The Caller ID information, however,

stays stored in the CID-927’s memory.)

1. Use a Phillips screwdriver to remove

the screw on the battery compart-

ment cover.

2. Press in the tab on the battery com-

partment cover and lift off the cover.

3. Put the batteries in the compartment

as indicated by the polarity symbols

(+ and –) marked inside.

4. Replace the cover and secure it with

the screw.

Once you install the batteries,

12:00AM 1/01 appears.

The telephone company sends the cor-

rect time with each incoming call, so the

correct date and time are automatically

set when the CID-927 receives its first

call.

When flashes in the upper right corner

of the display or the display dims, re-

place batteries.

Cautions:

• Always remove old or weak batter-

ies. Batteries can leak chemicals

that can destroy electronic parts.

• Dispose of old batteries promptly

and properly. Do not burn or bury

them.

43-927.fm Page 6 Thursday, June 24, 1999 9:36 AM

CONNECTING THE

PHONE

Plug one end of the supplied modular

cord into the jack on the back of the

CID-927. Then plug the other end of the

cord into the modular phone line jack.

CONNECTING THE

HANDSET

Plug one end of

the supplied coiled

modular cord into

the jack on the left

side of the phone

and the other end

into the jack on the

handset. Then

place the handset

on the base.

SETTING THE DIALING

MODE

Set TONE/PULSE on the back of the

base for the type of service you have. If

you are not sure which type you have,

do this test.

1. Be sure TONE/PULSE is set to TONE.

2. Lift the handset and listen for the

dial tone.

3. Press any number except 0.

Note: If your phone system requires that

you enter an access code (9, for exam-

ple) before you dial an outside number,

do not press that number.

If the dial tone stops, you have touch-

tone service. Leave TONE/PULSE set to

TONE.

If the dial tone continues, you have

pulse service. Set TONE/PULSE to

PULSE.

SETTING THE RINGER’S

VOLUME

Set RINGER OFF/LO/HI on the back of

the base to LO for a normal ringer vol-

ume, or HI for a louder ring.

TONE/PULSE

RINGER OFF/LO/HI

43-927.fm Page 7 Thursday, June 24, 1999 9:36 AM

If you do not want the ringer to sound,

set RINGER OFF/LO/HI to OFF. With the

ringer off, you can still make calls (and

answer calls if you hear another phone

on the same line ringing).

SETTING THE DISPLAY

LANGUAGE

The CID-927 is preset to show Caller ID

messages in English. Follow these

steps to change the language to French

or Spanish.

Note: If you do not finish a step within

20 seconds and the phone exits setup,

or if you make a mistake, start again at

Step 1.

1. Press STORE. PROGRAM MODE

appears.

2. Press REVIEW . SET LANGUAGE

then 1=EN 2=SP 3=FR appears.

3. Press:

•1to select English

•2to select Spanish

•3 to select French

The CID-927 beeps once, then the cur-

rent time display returns.

SETTING THE DATE AND

TIME

Your phone company sends the date

and time with each incoming call if you

subscribe to Caller ID service. Or, follow

these steps to set the date and time.

Note: If you make a mistake, simply

start again at Step 1.

1. Press STORE. PROGRAM MODE

appears.

2. Press

REVIEW . -:- -/- - with

the date cursor flashing and SET

DATE

appear.

3. Enter the desired date using number

keys. SET TIME appears and the

hour cursor flashes.

4. Enter the desired time. =AM

#=PM appears.

5. Press to select AM or # to select

PM. The phone beeps and the set

time display returns.

ADJUSTING THE DISPLAY

CONTRAST

Repeatedly press CONTRAST on the

back of the phone to adjust the display

contrast. The CID-927 beeps once then

the current time display returns.

STORE

CONTRAST

43-927.fm Page 8 Thursday, June 24, 1999 9:36 AM

PHONE OPERATION

USING REDIAL

The redial memory holds up to 32 digits,

so it can store both long-distance and lo-

cal numbers. To redial the last number,

lift the handset then press REDIAL.

Notes:

• The redial memory only stores the

last 32 digits of any number dialed.

• The redial memory does not store a

flash entry but stores any digits you

press after FLASH (see “Using

Flash”).

USING FLASH

FLASH performs the electronic equiva-

lent of a switchhook operation for spe-

cial services, such as Call Waiting.

For example, if you have Call Waiting,

press FLASH to answer an incoming call

without disconnecting the current call.

Press

FLASH again to return to the first

call.

Note: If you do not have any special

phone services, pressing FLASH might

disconnect the current call.

USING TONE SERVICES

ON A PULSE LINE

Some special services, such as bank-

by-phone, require tone signals. If you

have pulse service, follow these steps to

use those special services.

1. Be sure TONE/PULSE is set to

PULSE.

2. Call the service.

3. When the service answers, press

. Any additional numbers you dial

are sent as tone signals.

STORING AND DIALING

PRIORITY NUMBERS

You can store emergency phone num-

bers or the phone numbers you call

most frequently in the three priority

memory locations for one-touch dialing.

Each memory location can store up to

16 digits.

REDIAL

FLASH

43-927.fm Page 9 Thursday, June 24, 1999 9:36 AM

Notes:

• You will hear a dial tone during most

steps of this procedure. The phone

does not actually dial the number as

you store it, but you might also hear

a busy tone or recorded operator’s

voice after a few seconds. This is

normal.

• If you do not complete a step within

15 seconds, you must start over

from Step 2.

1. Press STORE. PROGRAM MODE

appears.

2. Enter the phone number you want to

store.

Note: If you make a mistake, hold

down the switchhook for a few sec-

onds, then release it and start over

at Step 2.

3. Press M1, M2, or M3 to store the pri-

ority number.

Without hanging up, repeat Steps

2–4 to store other numbers. Hang

up the handset when you are fin-

ished.

To dial a priority memory number, lift the

handset and press M1, M2, or M3.

Testing Stored Emergency

Numbers

If you want to test a stored emergency

number (police department, fire depart-

ment, ambulance), make the test call

during the late evening or early morning

hours to avoid peak demand periods.

Remain on the line to explain the reason

for your call.

Chain-Dialing

For quick recall of numbers for special

services (such as alternate long-dis-

tance or bank-by-phone), you can store

each group of numbers in its own mem-

ory location.

When calling special services, dial the

service’s main number first. At the ap-

propriate place in the call, dial the mem-

ory number for the additional numbers

you want to send.

USING THE INDEX CARD

The index card on the bottom of the

handset provides a convenient place for

you to record names and phone num-

bers for easy reference. Remove the

plastic cover with a small, pointed ob-

ject, such as a straightened paper clip.

Write the names and numbers (in pencil

in case you want to change them later),

then replace the cover.

43-927.fm Page 10 Thursday, June 24, 1999 9:36 AM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-1101 Bedienungsanleitung

Radio Shack

Radio Shack Presidian Bedienungsanleitung

Radio Shack

Radio Shack 43-3595 Bedienungsanleitung

Radio Shack

Radio Shack TAD-734 Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack 43-3827 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1017 Bedienungsanleitung

Radio Shack

Radio Shack 900MHz Hands-free Phone Bedienungsanleitung

Radio Shack

Radio Shack 43-3821 Bedienungsanleitung

Radio Shack

Radio Shack ET-542 Bedienungsanleitung

Radio Shack

Radio Shack RT-551 Bedienungsanleitung

Radio Shack

Radio Shack ET-926 Bedienungsanleitung

Radio Shack

Radio Shack ET-929 Bedienungsanleitung

Radio Shack

Radio Shack 43-3536 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack 43-143 Bedienungsanleitung

Radio Shack

Radio Shack 43-3817 Bedienungsanleitung

Radio Shack

Radio Shack 43-3880 Bedienungsanleitung

Radio Shack

Radio Shack TAD-729 Bedienungsanleitung

Radio Shack

Radio Shack 4301122D Bedienungsanleitung

Radio Shack

Radio Shack 43-1107 Bedienungsanleitung

Radio Shack

Radio Shack 43-683 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung