Radio Shack ET-1101 Bedienungsanleitung

Cat. No. 43-1101

OWNER’S MANUAL

Please read before using this equipment.

ET-1101

900MHz 40-Channel

Headset Cordless Phone

43-1101.fm Page 1 Friday, July 9, 1999 9:32 AM

FEATURES

Your RadioShack ET-1101 900MHz 40-

Channel Headset Cordless Phone com-

bines the clarity of 900MHz communica-

tion with portability and convenience.

The ET-1101’s headset connects to a

cordless keypad, so you can make calls

away from the base. And the headset lets

you keep your hands free while you talk.

Your phone includes these features:

900 MHz — provides less interference

and clearer sound than 46–49 MHz cord-

less phones.

40-Channel Auto Scan — automatically

selects a clear channel when you make or

answer a call.

Ample Talk and Standby Time — the

supplied battery (when fully charged) pro-

vides about 8 hours of talk time or 7 days

of standby time.

10-Number Memory — stores up to 10

frequently called phone numbers for easy

dialing.

Dual Charging Slots — lets you charge

a spare battery pack (not supplied) so the

ET-1101 is always ready to go, even un-

der constant use.

Intercom — lets you page the keypad

from the base, or the base from the key-

pad, and hold a conversation with the per-

son at the other end.

Headset Volume Control — lets you ad-

just the volume you hear through the

headset.

Ringer Volume Control — lets you

choose high, medium, or low volume on

the keypad’s ringer.

Advanced Super CCT Circuitry — pro-

vides sound clarity comparable to that of

a corded phone.

Security Access-Protection Code —

prevents other cordless phone users from

using your phone line while the keypad is

off the base.

COM-LOK®— ensures that other cord-

less phone users cannot use your phone

line when the keypad is on the base.

Redial — lets you redial the last number

dialed, with the touch of a button.

Mute — prevents the person on the other

end of the phone line from hearing you as

you talk to someone else in the room.

COM-LOK and RadioShack are registered trademarks used by Tandy Corporation.

43-1101.fm Page 2 Friday, July 9, 1999 9:32 AM

Flash — sends an electronic switchhook

signal for use with special phone services

such as Call Waiting.

Tone or Pulse (Rotary) Dialing — lets

you use your phone with tone or pulse di-

aling and lets you easily switch from pulse

to tone dialing for long-distance, bank-by-

phone, or other special services.

Belt Clip — lets you carry the keypad on

your belt for easy portability.

Hearing-Aid Compatibility — lets you

use your phone with hearing aids that

have a T (telephone) switch.

Your ET-1101 is ETL listed to UL stan-

dards and meets all applicable FCC stan-

dards.

Important Note: Cordless phones such

as this one require AC power to operate.

When the AC power is off, you cannot dial

out or receive incoming calls using your

ET-1101. To be safe, you should also

have a phone that does not need AC

power to operate (not a cordless phone)

so you can still make and receive calls if

there is an AC power failure.

Note: Your phone operates on standard

radio frequencies as allocated by the

FCC. It is possible for other radio units

operating nearby on similar frequencies

to unintentionally intercept your conversa-

tion or cause interference. This possible

lack of privacy can occur with any cord-

less phone.

We recommend you record your phone’s

serial number here. The number is on the

bottom of the base.

Serial Number: __________________

This symbol is intended to alert you to

the presence of uninsulated dangerous

voltage within the product’s enclosure

that might be of sufficient magnitude to

constitute a risk of electric shock. Do not

open the product’s case.

This symbol is intended to inform you

that important operating and mainte-

nance instructions are included in the lit-

erature accompanying this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

Warning: To prevent fire or shock

hazard, do not expose this product

to rain or moisture.

CAUTION

43-1101.fm Page 3 Friday, July 9, 1999 9:32 AM

READ THIS BEFORE

INSTALLATION

We have designed your phone to conform

to federal regulations, and you can con-

nect it to most telephone lines. However,

each device that you connect to the

phone line draws power from the phone

line. We refer to this power draw as the

device’s

ringer equivalence number

, or

REN. The REN is on the bottom of the

base.

If you are using more than one phone or

other device on the line, add up all the

RENs. If the total is more than five (three

in rural areas), your phones might not

ring. If ringer operation is impaired, re-

move a device from the line.

FCC STATEMENT

This telephone complies with Part 68 of

FCC Rules

. You must, upon request, pro-

vide the FCC registration number and the

REN to your phone company. These

numbers are shown on the bottom of the

base.

Note: You must not connect your phone

to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

Warning: Changes or modifications to

this unit not expressly approved by Ra-

dioShack could void the user’s authority

to operate the equipment.

43-1101.fm Page 4 Friday, July 9, 1999 9:32 AM

CONTENTS

Preparation ................................................................................................................... 6

Selecting a Location ................................................................................................ 6

Connecting the Phone ............................................................................................. 6

Connecting and Charging the Battery Pack ............................................................ 7

Attaching the Headset Holder ................................................................................. 8

Adjusting the Headset ............................................................................................. 9

Setting the Ringers On or Off .................................................................................. 9

Setting the Keypad’s Ringer Volume ..................................................................... 10

Setting the Dialing Mode ....................................................................................... 10

Operation .................................................................................................................... 11

Making and Receiving Calls .................................................................................. 11

Adjusting the Headset’s Volume ............................................................................ 11

Changing Channels ............................................................................................... 11

Using Redial .......................................................................................................... 12

Using Mute ............................................................................................................ 12

Using Flash ........................................................................................................... 12

Using Tone Services on a Pulse Line .................................................................... 12

Using Page/Intercom ............................................................................................. 13

Paging the Headset/Keypad ........................................................................... 13

Paging the Base .............................................................................................. 13

Memory Dialing ..................................................................................................... 14

Storing a Number in Memory .......................................................................... 14

Entering a Pause in a Memory Number .......................................................... 15

Dialing a Stored Number ................................................................................ 15

Chain Dialing Service Numbers ...................................................................... 15

Testing Stored Emergency Numbers .............................................................. 15

Troubleshooting ......................................................................................................... 16

Care and Maintenance ............................................................................................... 17

Replacing the Battery Pack ................................................................................... 17

The FCC Wants You to Know ................................................................................ 18

Lightning ................................................................................................................ 19

43-1101.fm Page 5 Friday, July 9, 1999 9:32 AM

PREPARATION

SELECTING A LOCATION

You can place the phone’s base on a flat

surface such as desk, shelf, or table. Se-

lect a location that is:

• near an easily accessible AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery, elec-

trical appliances, metal walls, filing

cabinets, wireless intercoms, security

alarms, and room monitors

The base’s location affects the phone’s

range. If you have a choice of several lo-

cations, try each to see which provides

the best performance.

Notes:

• Your telephone connects directly to a

modular telephone line jack. If your

phone line jack is not a modular jack,

you can update the wiring yourself,

using jacks and adapters available at

your local RadioShack store. Or, you

can let the phone company update

the wiring for you.

• The USOC number of the jack to be

installed is RJ11C.

CONNECTING THE PHONE

After you select a location for the phone’s

base, follow these steps to connect it to

AC power and to the phone line.

Caution: You must use a Class

2 power source that supplies 12

volts DC and delivers at least

500 mA. Its center tip must be set to posi-

tive and its plug must fit the ET-1101's DC

12V 500mA jack. The supplied adapter

meets these specifications. Using an

adapter that does not meet these specifi-

cations could damage the ET-1101 or the

adapter.

1. Plug one end of the supplied modular

cord into the TEL. LINE jack on the

back of the base.

2. Plug the modular cord’s other end

into a modular phone line jack.

43-1101.fm Page 6 Friday, July 9, 1999 9:32 AM

3. Plug the supplied AC adapter’s barrel

plug into the DC 12V 500mA jack on

the back of the base.

4. Plug the adapter into a standard AC

outlet.

5. Lift the base’s antenna to a vertical

position.

CONNECTING AND

CHARGING THE BATTERY

PACK

The ET-1101 comes with a rechargeable

nickel-cadmium battery pack. You must

connect the battery pack and charge it for

at least 15 hours before you use the

phone.

To connect the battery pack, line up the

slots on the battery pack with the posts on

the back of the keypad. Press down and

slide the battery pack forward until the

latch clicks.

To charge the battery pack, place the

keypad in the front charging slot on the

base. The CHARGE/IN USE indicator on

the base lights.

To charge a spare battery pack, place it in

the rear charging slot with its latch end

facing down and its contacts toward the

rear of the base. The CHARGE indicator

lights.

Spare battery packs (RadioShack Cat.

No. 23-810, not supplied) are available at

your local RadioShack store.

Recharge the battery pack when the LOW

BATT indicator on the keypad flashes.

Rear

Charging

Slot

Front

Charging

Slot

LOW BATT

Indicator

43-1101.fm Page 7 Friday, July 9, 1999 9:32 AM

Notes:

• When you first use the phone after

charging or recharging the battery

pack, the phone might not work and

you might hear error tones (three

beeps).

If you hear the error tones, return the

keypad to the base for about 5 sec-

onds to reset the security access-

protection code.

• About once a month, fully discharge

the battery pack by keeping the

phone off the base until the LOW

BATT indicator flashes. Otherwise,

the battery pack loses its ability to

fully recharge.

• If the CHARGE/IN

USE indicator does

not light when you

place the keypad

on the base, be

sure the battery

pack and AC

adapter are cor-

rectly and securely

connected. Also,

check the charging

contacts on the

keypad and base. If

the contacts are

dirty or tarnished,

clean them with a

pencil eraser.

Charging Contacts

• If the battery pack becomes com-

pletely discharged or the base loses

power while the handset is away from

it, the security access-protection code

needs to be reset. To reset the securi-

ty code, place the handset on the

base for about 5 seconds. If it was the

handset that lost power, leave it on

the base to charge the battery pack.

• If you are not going to use your phone

for an extended period of time, dis-

connect its battery pack. This helps

increase the battery pack’s usable

life.

ATTACHINGTHEHEADSET

HOLDER

Insert the tabs on the headset holder into

the slots on the base and snap it into

place.

43-1101.fm Page 8 Friday, July 9, 1999 9:32 AM

ADJUSTING THE HEADSET

1. Place the headset on your head with

the earpiece over either ear.

2. Adjust the headset band until it rests

with almost no pressure on your ear

and the top of your head.

If the headset is loose, adjust it

inward slightly to tighten it. If the

headset is tight, gently pull the head-

set band out to loosen it.

3. Hold the headset in place, and adjust

the microphone boom until it is about

even with your chin. Experiment until

you find the most comfortable posi-

tion.

Caution: The microphone boom

swivels on the headset. Do not bend

the microphone boom while you

adjust it.

Note: When you are not using the head-

set, place it on the headset hanger. Oth-

erwise (if you just lay it down on a flat

surface, for example), you might have to

repeat these adjustments.

SETTING THE RINGERS ON

OR OFF

The ringer switch on the right side of the

base controls both the keypad and base

ringers. To have the ET-1101 ring when a

call comes in, set RINGER to ON. To turn

the ringer off, set RINGER to OFF.

With RINGER set to OFF, the phone does

not ring, but you can still make outgoing

calls. If you hear an extension telephone

ring, you can answer the incoming call on

this phone. The CHARGE/IN USE indica-

tor on the base and the IN USE indicator

on the keypad flash until you answer the

call.

RINGER

43-1101.fm Page 9 Friday, July 9, 1999 9:32 AM

SETTING THE KEYPAD’S

RINGER VOLUME

You can adjust the keypad’s ringer vol-

ume by repeatedly pressing RINGER AD-

JUST when the phone is not in use. The

keypad rings with the current volume

(high, medium, or low) as you select it.

Note: You cannot adjust the base’s ringer

volume.

SETTING THE DIALING

MODE

Set TONE-PULSE on the side of the base

for the type of service you have. If you are

not sure which type you have, do this sim-

ple test after charging the battery pack.

1. Set TONE-PULSE to TONE.

2. Press TALK so the IN USE indicator

lights and listen for a dial tone.

3. Press any number other than 0.

Note: If your phone system requires

that you dial an access code (9, for

example) before you dial an outside

number, do not press the access

code either.

If the dial tone stops, you have touch-

tone service. If the dial tone contin-

ues, you have pulse service.

4. If you have tone service, leave TONE-

PULSE set to TONE. If you have pulse

service, set TONE-PULSE to PULSE.

5. To hang up, place the keypad on the

base or press TALK.

RINGER

ADJUST

IN USE

Indicator

43-1101.fm Page 10 Friday, July 9, 1999 9:32 AM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 43-1107 Bedienungsanleitung

Radio Shack

Radio Shack ET-532 Bedienungsanleitung

Radio Shack

Radio Shack 43-3505 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack ET-916 Bedienungsanleitung

Radio Shack

Radio Shack ET-539 Bedienungsanleitung

Radio Shack

Radio Shack ET-545 Bedienungsanleitung

Radio Shack

Radio Shack 43-1122 Bedienungsanleitung

Radio Shack

Radio Shack 43-3575 Bedienungsanleitung

Radio Shack

Radio Shack 43-3857 Bedienungsanleitung

Radio Shack

Radio Shack 43-327 Bedienungsanleitung

Radio Shack

Radio Shack ET-2101 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Radio Shack

Radio Shack ET-539 Bedienungsanleitung

Radio Shack

Radio Shack 43-3824 Bedienungsanleitung

Radio Shack

Radio Shack TAD-728 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack ET-1125 Bedienungsanleitung

Radio Shack

Radio Shack 43-3578 Bedienungsanleitung

Radio Shack

Radio Shack 43-3887 Bedienungsanleitung

Radio Shack

Radio Shack ET-546 Bedienungsanleitung

Radio Shack

Radio Shack 43-3821 Bedienungsanleitung

Radio Shack

Radio Shack ET-521 Bedienungsanleitung

Radio Shack

Radio Shack 43-3815 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung