Radio Shack ET-1125 Bedienungsanleitung

Cat. No. 43-1125

OWNER’S MANUAL

Please read before using this equipment.

ET-1125

900 MHz Digital Spread Spectrum

Cordless Telephone

with Caller ID/Call Waiting ID

FEATURES

Your RadioShack 900 MHz Digital

Spread Spectrum Cordless Telephone

uses advanced technology to give you

superior audio quality and extended

range.

The phone’s Caller ID unit records each

caller’s telephone number (and name, if

available in your area) and the date and

time of the call, as provided by your local

phone company to Caller ID service

subscribers. If you subscribe to Call

Waiting with Caller ID, the phone can

show you the incoming caller informa-

tion, even when you are already talking

on the phone.

Your phone has these features:

Caller ID Memory — stores up to 50

Caller ID records.

3-Line Liquid Crystal Display — lets

you view an entire Caller ID record on

one screen.

20-Number Memory Dialing — lets

you store up to 20 numbers in memory

for easy dialing.

Headset Jack — lets you connect an

optional headset (available from your lo-

cal RadioShack store) for hands-free

convenience.

Tone/Pulse Dialing — lets you use

your phone with either type of service.

Hearing-Aid Compatibility — lets you

use the phone with hearing aids that

have a T (telephone) switch.

900 MHz Operation — provides longer

range and less interference than many

other cordless phones.

Spread Spectrum Technology —

spreads the signal across several fre-

quencies, providing additional security

for your phone conversations.

Page — lets you send a signal from the

base to the handset to page someone or

to help you locate the handset.

Volume Control — lets you adjust the

volume you hear through the handset.

Adjustable Ringer/Tone Volume—

lets you choose between two volumes

and tones for the phone’s ringer.

Facedown or Faceup Handset Charg-

ing — you can place the handset on the

base face down or face up (to show the

Caller ID display, for example).

Wall Mountable — you can mount the

phone on a wall to save surface space.

Ample Talk and Standby Time — the

supplied battery (when fully charged)

provides about 3.5 hours of talk time or

7 days of standby time.

RadioShack is a registered trademark used by RadioShack Corporation.

Security Access-Protection Code —

automatically prevents other cordless

phone users from using your phone line

while the handset is off the base.

Auto Talk — lets you set the phone so

you can answer a call simply by lifting

the handset from the base.

Redial — lets you quickly redial any of

the last three numbers dialed.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Important Caller ID Information

To use the phone’s Caller ID and Call

Waiting with Caller ID features, you

must be in an area where those services

are available and you must subscribe to

those services through your local phone

company.

Where Caller ID is offered, one or more

options are generally available:

• caller’s number only

• caller’s name only

• caller’s name and number.

This phone has been tested and found

to comply with all applicable UL and

FCC standards.

We have designed your phone to con-

form to federal regulations, and you can

connect it to most telephone lines. How-

ever, each phone (and each device,

such as a telephone or answering ma-

chine) that you connect to the telephone

line draws power from the telephone

line. We refer to this power draw as the

device’s ringer equivalence number, or

REN. The REN is on the bottom of your

phone.

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to rain

or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

If you use more than one phone or other

device on the line, add up all of the

RENs. If the total is more than five (or

three in rural areas), your telephones

might not ring. If ringer operation is im-

paired, remove a device from the line.

Your phone complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC registration number

and the REN to your telephone compa-

ny. Both numbers are on the bottom of

your phone.

Note: You must not connect your phone

to:

• coin-operated systems

• party-line systems

• most electronic key telephone sys-

tems

Important:

• Cordless phones such as this one

require AC power to operate. When

the AC power is off, you cannot dial

out or receive incoming calls using

your phone. For this reason, the

phone should not be your only tele-

phone. To be safe, you should also

have a phone that does not require

AC power to operate (not a cordless

phone) so you can still make and re-

ceive calls if there is an AC power

failure.

• Some cordless phones operate at

frequencies that might cause inter-

ference to nearby TVs and VCRs.

To minimize or prevent such interfer-

ence, the base of the cordless

phone should not be placed near or

on top of a TV or VCR.

• Your cordless phone operates on

standard radio frequencies, as allo-

cated by the FCC. Even though your

phone’s access protection code pre-

vents unauthorized use of your

phone line, it is possible for other ra-

dio units operating on similar fre-

quencies within a certain area to

unintentionally intercept your con-

versations and/or cause interfer-

ence. This possible lack of privacy

can occur with any cordless phone.

FCC STATEMENT

The phone complies with the limits for a

Class B digital device as specified in

Part 15 of

FCC Rules

. These limits pro-

vide reasonable protection against ra-

dio and TV interference in a residential

area. However, your equipment might

cause TV or radio interference even

when it is operating properly. To elimi-

nate interference, you can try one or

more of the following corrective mea-

sures:

• Reorient or relocate the receiving

antenna.

• Increase the distance between the

equipment and the radio or TV.

• Use outlets on different electrical cir-

cuits for the equipment and the ra-

dio or TV.

Consult your local RadioShack store if

the problem still exists.

CONTENTS

Installation ............................................................................................................... 6

Mounting the Phone ........................................................................................... 6

On a Desk, Shelf, or Table ........................................................................... 6

On a Wall Plate or Wall ................................................................................ 7

Connecting and Charging the Battery Pack ....................................................... 8

Setting the Dialing Mode .................................................................................. 10

Setting the Ringer Tone/Volume ....................................................................... 10

Turning Auto Talk On/Off .................................................................................. 11

Turning Caller ID/Call Waiting On/Off ............................................................... 11

Storing Your Area Code ................................................................................... 11

Operation ............................................................................................................... 13

A Quick Look at Your Phone ............................................................................ 13

Making and Receiving Calls ............................................................................. 14

Selecting the Channel ...................................................................................... 14

Adjusting the Handset Volume ......................................................................... 14

Using Redial ..................................................................................................... 14

Using Flash ...................................................................................................... 15

Using Tone Services on a Pulse Line ............................................................... 15

Paging .............................................................................................................. 15

Memory Dialing ................................................................................................ 16

Storing a Number and Name in Memory ................................................... 16

Editing or Deleting a Number in Memory ................................................... 17

Entering a Pause ....................................................................................... 17

Reviewing Memory Numbers ..................................................................... 17

Dialing a Memory Number ......................................................................... 17

Chain-Dialing Service Numbers ................................................................. 18

Testing Stored Emergency Numbers ......................................................... 18

Using a Headset ............................................................................................... 18

Caller ID Operation ............................................................................................... 19

Reviewing Caller ID Records ........................................................................... 19

Caller ID Messages ................................................................................... 20

Adding/Deleting the Area Code ........................................................................ 20

Dialing Numbers from a Caller ID Record ........................................................ 20

Storing a Caller ID Record to Memory ............................................................. 21

Deleting Caller ID Records ............................................................................... 21

Troubleshooting .................................................................................................... 22

Care and Maintenance .......................................................................................... 24

Replacing the Battery Pack .............................................................................. 25

The FCC Wants You to Know ........................................................................... 25

Lightning ........................................................................................................... 26

INSTALLATION

MOUNTING THE PHONE

You can place the phone on a desk or

table, mount it on a standard wall plate,

or mount it directly on a wall.

Select a location that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of sev-

eral locations, try each to see which

provides the best performance.

You can power the phone using the sup-

plied 9V, 210-mA AC adapter.

Cautions:

You must use a Class 2

power source that supplies

9V DC and delivers at least

210 mA. Its center tip must be set to

positive and its plug must fit the

phone's

DC IN 9V jack. The supplied

adapter meets these specifications.

Using an adapter that does not meet

these specifications could damage

the phone or the adapter.

• Always connect the AC adapter to

the phone before you connect it to

AC power. When you finish, discon-

nect the adapter from AC power be-

fore you disconnect it from the

phone.

Note:

Your telephone connects directly

to a modular telephone line jack. If your

telephone wiring does not have a modu-

lar jack, you can update the wiring your-

self using jacks and adapters available

at your local RadioShack store, or have

the telephone company update the wir-

ing for you.

The USOC number of the jack to be in-

stalled is RJ11C (or RJ11W for a wall

plate jack).

On a Desk, Shelf, or Table

Follow these steps when you place the

base on a desk, shelf or table.

1. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

2. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

3. Route the adapter’s cord through

the strain relief slot on the base.

4. Plug the modular cord’s other end

into the phone jack.

5. Plug the adapter into a standard AC

outlet.

6. Lift the base’s antenna to a vertical

position.

On a Wall Plate or Wall

1. Plug one end of the supplied short

modular cord into the TEL LINE jack

on the back of the base as in “On a

Desk, Shelf, or Table,” Step 1, on

Page 6.

2. Insert the supplied AC adapter’s

barrel plug into DC IN 9V as in “On a

Desk, Shelf, or Table,” Step 2, on

Page 6.

3. Route the adapter and modular

cords through the grooves on the

base.

4. Plug the modular cord’s other end

into the wall plate jack, then align

the base’s keyhole slots with the

wall plate studs and slide the base

downward to secure it.

5. Plug the adapter into a standard AC

outlet.

6. Press and lift out the handset hold-

er. Rotate it 180°, then snap it back

into place so it holds the handset.

7. Lift the base’s antenna to a vertical

position.

Note: To mount the phone directly on a

wall, you need two screws (not supplied)

with heads that fit into the keyhole slots

on the bottom of the base.

Follow the steps under “On a Wall Plate

or Wall” on Page 7, then apply these ad-

ditional instructions for placement on a

wall.

1. Drill two holes 315/16

inches (100 mm)

apart. Then thread

a screw into each

hole, letting the

heads extend about

3/16 inch (5 mm)

from the wall.

2. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base and route

the adapter cable and modular

cords through the grooves on the

base.

3. Align the base’s keyhole slots with

the mounting screws and slide the

base downward to secure it.

CONNECTING AND

CHARGINGTHE BATTERY

PACK

The phone comes with a rechargeable

nickel-cadmium battery pack in the

handset. Before using your phone, you

must connect the battery pack, then

charge it for about 24 hours.

1. Press down and slide off the battery

pack compartment cover.

315/16

Inches

3/16

Inches

2. Lift the battery pack out of the com-

partment.

3. Plug the battery pack’s connector in-

to the socket in the compartment,

(the connector fits only one way), re-

place the battery pack, and replace

the cover.

To charge the battery pack, place the

handset either faceup or facedown on

the base. The CHARGE/IN USE indica-

tor on the base lights and Total:00

appears on the handset display.

Recharge the battery pack when Low

Battery flashes on the display.

Note: If the CHARGE/IN USE indicator

flashes when the handset is on the

base, the battery pack is not connected

or loosely connected. Reconnect the

battery pack securely.

Notes:

• When you first use the phone after

charging or recharging the battery

pack, the phone might not work and

you might hear an error tone when

you press TALK. Return the handset

to the base for about 5 seconds to

reset the security access-protection

code.

• If the handset or the base loses

power, the security access-protec-

tion code might be lost. To reset the

code, return the handset to the base

for about 5 seconds.

• Using a pencil eraser, clean the

charging contacts on the handset

and base about once a month.

• If the battery pack becomes weak

during a call, the handset beeps ev-

ery 3 seconds and Low Battery

flashes. When this happens, you

cannot make a call until you re-

charge the battery pack.

• About once a month, fully discharge

the battery by keeping the handset

off the base until Low Battery

flashes on the display. Otherwise,

the battery pack loses its ability to

fully recharge.

• If the display is blank and the phone

does not work, recharge the battery

pack. (The battery power might be

too low to light the display.)

• If you are not going to use your

phone for an extended period of

time, disconnect the battery pack.

This increases the battery pack’s

usable life.

• The supplied battery pack should

last about a year. When it loses its

ability to fully recharge, order a re-

placement battery pack from your

local RadioShack store (see “Re-

placing the Battery Pack” on

Page 25).

SETTING THE

DIALING MODE

Set DIAL MODE on the back of the base

for the type of service you have. If you

are not sure which type you have, do

this test after you charge the handset’s

battery pack.

1. Set DIAL MODE to T(tone).

2. Lift the handset, press TALK, and

listen for a dial tone.

3. Press any number other than 0.

Note: If your phone system requires

that you dial an access code (9, for

example) before you dial an outside

number, do not press the access

code, either.

If the dial tone stops, you have

touch-tone service. Leave DIAL

MODE set to T.

If the dial tone continues, you have

pulse service. Leave DIAL MODE set

to P(pulse).

4. Press TALK or place the handset on

the base to hang up.

SETTING THE RINGER

TONE/VOLUME

You can select one of four different ring-

er tone/volume settings on the handset.

At any time, except during a call, repeat-

edly press VOL/CID or to select the

desired ringer setting. Each time you

press a button, the phone rings at the

selected setting and the display shows

Ringer AHigh,Ringer ALow,

Ringer BHigh, or Ringer B Low.

Note: Pressing VOL/CID at

Ringer

AHigh or VOL/CID at Ringer B

Low does not change the setting. Press

the opposite arrow key to change the

setting.

DIAL MODE

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack TAD-734 Bedienungsanleitung

Radio Shack

Radio Shack ET-1111 Bedienungsanleitung

Radio Shack

Radio Shack 43-3887 Bedienungsanleitung

Radio Shack

Radio Shack 43-5560 Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack 43-329 Bedienungsanleitung

Radio Shack

Radio Shack 43-3536 Bedienungsanleitung

Radio Shack

Radio Shack 43-5862 Bedienungsanleitung

Radio Shack

Radio Shack 43-3880 Bedienungsanleitung

Radio Shack

Radio Shack 43-1107 Bedienungsanleitung

Radio Shack

Radio Shack 43-3871 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Telephone Bedienungsanleitung

Radio Shack

Radio Shack ET-1119 Bedienungsanleitung

Radio Shack

Radio Shack 43-327 Bedienungsanleitung

Radio Shack

Radio Shack 43-325 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call... Bedienungsanleitung

Radio Shack

Radio Shack 43-3526 Bedienungsanleitung

Radio Shack

Radio Shack ET-927 Bedienungsanleitung

Radio Shack

Radio Shack 43-3529 Bedienungsanleitung

Radio Shack

Radio Shack ET-686 Bedienungsanleitung

Radio Shack

Radio Shack ET-925 Bedienungsanleitung

Radio Shack

Radio Shack ET-543 Bedienungsanleitung

Radio Shack

Radio Shack ET-550 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung