Radio Shack ET-539 Bedienungsanleitung

Cat. No. 43-1039

OWNER’S MANUAL

25-Channel Cordless Telephone

Please read before using this equipment.

ET-539

with Lighted Keypad

43-1039.fm Page 1 Tuesday, August 17, 1999 10:12 AM

FEATURES

COM-LOK is a registered trademark used by Tandy Corporation.

RadioShack is a trademark used by Tandy Corporation.

Your RadioShack ET-539 25-Channel

Cordless Telephone with Lighted Key-

pad includes the latest advances in

cordless phone technology, and in-

cludes these features:

Auto-Scan — automatically selects

the clearest channel when you pick up

the phone.

25-Channel Selector — lets you man-

ually change channels to find the one

with the least interference.

hted Ke

pad — lights to make the

phone easy to use when you are mak-

ing or answering a call in a dark room.

10-Number Memor

— lets you store

10 phone numbers in memory for easy

dialing.

Advanced Super CCT Circuitr

—

provides clarity comparable to a cord-

ed phone, reduces background noise,

and increases effective operating dis-

tance.

COM-LOK‚— ensures that other cord-

less phone users cannot use your

phone line while the handset is on the

base.

Automatic Securit

Access Protec-

tion Code — changes each time you

disconnect and restore power to the

base to help prevent other cordless

phone users from using your phone

line while the handset is off the base.

Flash — sends an electronic switch-

hook signal for use with special phone

services such as call waiting.

Redial — with the touch of a button,

quickly redials the last number dialed.

Touch Tone or Pulse (Rotar

) Dial-

— lets you connect your phone to

either type of service.

Handset Volume Control — lets you

control the volume of the sound you

hear through the handset.

Hearin

-Aid Compatibilit

— lets

you use your phone with hearing aids

that have a T (telephone) switch.

Please read this Owner’s Manual care-

fully so you can enjoy all of your tele-

phone’s features.

43-1039.fm Page 2 Tuesday, August 17, 1999 10:12 AM

Important: Cordless phones such as

this one require AC power to operate.

When the AC power is off, you cannot

dial out or receive incoming calls using

your ET-539. For this reason, the ET-

539 cordless phone should not be your

only telephone. To be safe, you should

also have a phone that does not need

AC power to operate (not a cordless

phone)soyoucanstillmakeandreceive

calls if there is an AC power failure.

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

Your ET-539 operates on standard ra-

dio frequencies, as allocated by the

FCC. Therefore, it is possible for other

radio units operating on similar fre-

quencies, within a certain area, to in-

advertently intercept your conversa-

tions and/or cause interference on

your cordless telephone. This lack of

privacy can occur with any cordless

telephone.

For your records, we urge you to

record the serial number of your phone

in the space below. The serial number

is on the bottom panel of the base.

Serial Number ______________

This symbol is intended to alert you

to the presence of uninsulated dan-

gerous voltage within the product’s

enclosure that might be of sufficient

magnitude to constitute a risk of

electric shock. Do not open the

product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are in-

cluded in the literature accompany-

ing this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

Warning: To prevent fire or shock

hazard, do not expose this product

to rain or moisture.

CAUTION

43-1039.fm Page 3 Tuesday, August 17, 1999 10:12 AM

READ THIS BEFORE

INSTALLATION

We have designed your telephone to

conform to federal regulations, and

you can connect it to most telephone

lines. However, each device that you

connect to the phone line draws power

from the phone line. We refer to this

power draw as the device’s ringer

equivalence number, or REN. The

REN is shown on the bottom of your

phone’s base.

If you are using more than one phone

or other device on the line, add up all

the RENs. If the total is more than five,

your phone might not ring. In rural ar-

eas, a total REN of three might impair

ringer operation. If ringer operation is

impaired, remove a device from the

line.

FCC STATEMENT

This telephone complies with Part 68

FCC Rules

. You must, upon re-

quest, provide the FCC registration

number and the REN to your phone

company. These numbers are located

on the bottom of your phone’s base.

Note: You must not connect your

phone to any of the following:

• Coin-operated systems

• Party-line systems

• Most electronic key phone sys-

tems

43-1039.fm Page 4 Tuesday, August 17, 1999 10:12 AM

CONTENTS

Installation ............................................................................................................ 6

Selecting a Location ........................................................................................ 6

Placing the Base on a Desk Top ............................................................... 6

Mounting the Base on a Wall Plate ........................................................... 7

Mounting the Base Directly on a Wall ....................................................... 8

Preparation ......................................................................................................... 10

Connecting the Battery ................................................................................. 10

Charging the Battery ..................................................................................... 10

Setting the Dialing Mode ............................................................................... 11

Setting the Volume.......................................................................................... 11

Operation ............................................................................................................ 12

Making/Answering a Call .............................................................................. 12

Using the Handset at the Base ............................................................... 12

Using the Handset Away from the Base ................................................. 12

Changing Channels ...................................................................................... 13

Using Redial .................................................................................................. 13

Using Flash ................................................................................................... 13

Using Tone Services on a Pulse Line ........................................................... 14

Using Page ................................................................................................... 14

Memory Dialing ............................................................................................. 14

Storing a Number in Memory .................................................................. 15

Entering a Pause in a Memory Number ................................................. 16

Dialing a Stored Number ........................................................................ 16

Storing/Chain Dialing Service Numbers ................................................. 16

Testing Stored Emergency Numbers ...................................................... 16

Troubleshootin

................................................................................................ 17

Care and Maintenance ...................................................................................... 19

Replacing the Battery .................................................................................... 20

The FCC Wants You to Know ....................................................................... 21

Lightning ....................................................................................................... 21

43-1039.fm Page 5 Tuesday, August 17, 1999 10:12 AM

INSTALLATION

SELECTING A LOCATION

Select a location for the telephone that

is:

• Near an AC outlet

• Near a telephone line jack

• Out of the way of normal activities

• Away from electrical machinery,

electrical appliances, and metal

walls or filing cabinets

• Away from wireless intercoms,

alarms, and room monitors

The base’s location affects the phone’s

range. If you have a choice of several

locations, try each to see which pro-

vides the best performance.

Note: If the phone line jack is not a

modular jack, you must update the wir-

ing yourself, using jacks and adapters

available at your local RadioShack

store. Or, you can let the phone com-

pany update the wiring for you.

• The phone company will charge

you for the installation of the nec-

essary jacks.

• The USOC number of the jack to

be installed is RJ11C for a base-

board jack or RJ11W for a wall

jack.

Caution: You must use a 120V AC/

12V DC adapter that delivers at least

200 milliamps with its center tip set to

positive. Its plug must correctly fit the

phone’s 12V DC jack. The supplied

adapter meets these requirements.

Using an adapter that does not meet

these requirements could damage the

phone or the adapter.

Placing the Base on

a Desk Top

1. Plug one end of the supplied mod-

ular cord into the phone jack on

the back of the base.

2. Plug the modular cord’s other end

into a modular phone line jack.

3. Insert the supplied AC adapter’s

barrel plug into the 12V DC jack on

the back of the base.

4. Plug the adapter into a standard

AC outlet.

5. Fully extend the base’s antenna

and place it in a vertical position.

43-1039.fm Page 6 Tuesday, August 17, 1999 10:12 AM

Mounting the Base on

a Wall Plate

You need a standard wall plate (not

supplied) for this mounting method.

1. Plug one end of the short modular

cord into the phone jack on the

back of the base.

2. Route the short cord downward

through the top left slot on the

base's bottom and under the clips

as shown.

3. Route the other end of the short

cord through the hole in the sup-

plied bracket's center.

4. Align the tabs on the bracket with

the slots on the back of the base

and push up on the bracket until it

snaps in place.

Note: If you later want to remove

the bracket, press PUSH and slide

the bracket down to remove it

from the base's bottom.

5. Insert the supplied AC adapter's

barrel plug into the 12V DC jack on

the back of the base. Then route

the adapter's cord around the

strain relief and through the right

slot on the base's bottom and

under the clips as shown.

6. Plug the adapter into a standard

AC outlet.

7. Plug the modular cord into the

wall plate's jack.

(illus

w/callout:

AC Adapter)

43-1039.fm Page 7 Tuesday, August 17, 1999 10:12 AM

8. Align the bracket's keyhole slots

with the wall plate studs and slide

the base downward to secure it.

9. Press and lift out the handset

holder. Rotate the holder 180

degrees as shown, and then snap

it back into place so it holds the

handset.

10. Fully extend the base’s antenna

and place it in a vertical position.

Mounting the Base Directly

on a Wall

You need two wood screws (not sup-

plied) for this mounting method.

1. Drill two holes 315/16 inches (100

mm) apart. Then thread a screw

into each hole, letting the heads

extend about 1/4inch (6.5 mm)

from the wall.

2. Plug one end of the supplied long

modular cord into the phone jack

on the back of the base.

3. On the bottom of the base, route

the modular cord downward and

under the left slot's clips. Then

plug the cord's other end into a

modular phone line jack.

(Illus with

callout: Lift)

43-1039.fm Page 8 Tuesday, August 17, 1999 10:12 AM

4. Align the tabs on the bracket with

the slots on the back of the base

and push up on the bracket until it

snaps in place.

Note: If you later want to remove

the bracket, press PUSH and slide

the bracket down to remove it

from the base's bottom.

5. Insert the supplied AC adapter's

barrel plug into the 12V DC jack on

the back of the base. Then route

the adapter's cord around the

strain relief and through the right

slot on the base's bottom and

under the clips.

6. Plug the adapter into a standard

AC outlet.

7. Align the keyhole slots with the

mounting screws and slide the

base downward to secure it.

8. Press and lift out the handset

holder. Rotate the holder 180

degrees as shown, and then snap

it back into place so it holds the

handset.

9. Fully extend the base’s antenna

and place it in a vertical position.

(Illus with

callout:

AC Adapter)

(illus with

callout: Lift)

43-1039.fm Page 9 Tuesday, August 17, 1999 10:12 AM

PREPARATION

CONNECTING THE

BATTERY

Before you use your phone for the first

time, you must connect the battery and

charge it for 15 hours.

Slide off the battery compartment cov-

er on the back of the handset and con-

nect the battery’s plug to the pins

inside the compartment.

Replace the cover, then follow the in-

structions under “Charging the Bat-

tery.”

CHARGING THE

BATTERY

After you connect the battery, set

POWER to OFF. Then place the hand-

set on the base so the CHARGE/TALK

indicator lights and let the battery

charge for about 15 hours.

The phone recharges whenever the

handset is on the base. You can re-

charge the battery at any time, but you

must be sure to recharge the battery

when LOW BATT lights on the hand-

set.

Notes:

• The first time you use your phone

after charging the battery, the

handset might not work or might

sound an error tone when you

press

TALK. This might also occur

when you recharge a battery that

has been completely discharged.

If this happens, be sure the hand-

set is turned on. Then return the

handset to the base for 5 sec-

onds. This resets the security

access protection code.

(Illus with

callout:

CHARGE/

TALK

Indicator)

43-1039.fm Page 10 Tuesday, August 17, 1999 10:12 AM

Andere Handbücher für ET-539

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Dual Caller... Bedienungsanleitung

Radio Shack

Radio Shack ET-919 Bedienungsanleitung

Radio Shack

Radio Shack ET-1102 Bedienungsanleitung

Radio Shack

Radio Shack ET-153 Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack ET-531 Bedienungsanleitung

Radio Shack

Radio Shack 43-3814 Bedienungsanleitung

Radio Shack

Radio Shack 43-3585 Bedienungsanleitung

Radio Shack

Radio Shack ET-532 Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack TAD-733 Bedienungsanleitung

Radio Shack

Radio Shack 43-3533 Bedienungsanleitung

Radio Shack

Radio Shack 900MHz Hands-free Phone Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call... Bedienungsanleitung

Radio Shack

Radio Shack 43-325 Bedienungsanleitung

Radio Shack

Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital... Bedienungsanleitung

Radio Shack

Radio Shack 43-329 Bedienungsanleitung

Radio Shack

Radio Shack 43-3546 Bedienungsanleitung

Radio Shack

Radio Shack 43-3529 Bedienungsanleitung

Radio Shack

Radio Shack ET-548 Bedienungsanleitung

Radio Shack

Radio Shack 43-3505 Bedienungsanleitung

Radio Shack

Radio Shack 43-1088 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller... Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung