Radio Shack ET-1104 Bedienungsanleitung

Cat. No. 43-1104

OWNER’S MANUAL

Please read before using this equipment.

ET-1104

900 MHz Digital Spread Spectrum

Cordless Telephone

43-1104.fm Page 1 Wednesday, August 18, 1999 8:05 AM

FEATURES

Pro

rammable Rin

er — choose from

eight tone/volume settings for the hand-

set’s ringer.

Ample Talk and Standb

Time — the

supplied battery (when fully charged)

provides about 31/2hours of talk time or

7 days of standby time.

Securit

Access-Protection Code —

prevents other cordless phone users

from using your phone line while the

handset is off the base.

Redial — lets you quickly dial the last

number dialed.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Tone or Pulse Dialin

— lets you use

your phone with tone or pulse (rotary) di-

aling and lets you switch from pulse to

tone dialing for long-distance, bank-by-

phone, or other special services.

Quick Talk — you can answer a call

simply by lifting the handset from the

base.

Answer — lets you press any

key to answer a call when the handset is

away from the base.

Hearin

-Aid Compatibilit

— lets you

use your phone with hearing aids that

have a T (telephone) switch.

RadioShack is a registered trademark used by Tandy Corporation.

Your RadioShack ET-1104 900 MHz

Digital Spread Spectrum Cordless Tele-

phone uses advanced cordless tele-

phone technology to give you superior

audio quality and extended range.

And, the ET-1104’s headset jack means

you can connect an optional headset for

hands-free convenience.

The ET-1104 has these features:

Spread Spectrum Technolo

—

spreads the signal across several fre-

quencies, providing additional security

for your phone conversations.

900 MHz — provides less interference,

clearer sound, and more than twice the

range of 46–49 MHz cordless phones.

20-Number Memor

Dialin

— lets you

store 20 numbers in memory for easy di-

aling.

Speed Dial — you can store four num-

bers in the ET-1104’s speed dial memo-

ry, then dial them with the touch of a

button.

e— lets you send a signal from the

base to the handset to page someone or

to help you locate the handset if you

have misplaced it.

Volume Control — lets you adjust the

volume you hear through the handset.

43-1104.fm Page 2 Wednesday, August 18, 1999 8:05 AM

This telephone has been tested and

found to comply with all applicable UL

and FCC standards.

Important:

• Cordless phones such as this one

require AC power to operate. When

the AC power is off, you cannot dial

out or receive incoming calls using

your ET-1104. To be safe, you

should also have a phone that does

not need AC power to operate (not a

cordless phone) so you can still

make and receive calls if there is an

AC power failure.

• When AC power is lost, the ET-1104

loses the security access-protection

code connection between the base

and the handset. When power is re-

stored, put the handset on the base

briefly to restore this connection so

you can use the handset.

We recommend you record your

phone’s serial number here. The num-

ber is on the bottom of the base.

Serial Number __________________

This symbol is intended to alert you to

the presence of uninsulated danger-

ous voltage within the product’s enclo-

sure that might be of sufficient

magnitude to constitute a risk of elec-

tric shock. Do not open the product’s

case.

This symbol is intended to inform you

that important operating and mainte-

nance instructions are included in the

literature accompanying this product.

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVIC-

ING TO QUALIFIED PERSONNEL.

Warning: To prevent fire or shock

hazard, do not expose this product

to rain or moisture.

CAUTION

43-1104.fm Page 3 Wednesday, August 18, 1999 8:05 AM

READ THIS BEFORE

INSTALLATION

We have designed your phone to con-

form to federal regulations and you can

connect it to most phone lines. However,

each device that you connect to the tele-

phone line draws power from the line.

We refer to this power draw as the

phone’s

ringer

equivalence

number

, or

REN. The REN is on the bottom of your

phone.

If you use more than one phone or other

device on the line, add up all the RENs.

If the total is more than five, your phones

might not ring. In rural areas, a total

REN of three might impair ringer opera-

tion. If ringer operation is impaired, re-

move one of the devices from the line.

FCC STATEMENT

Your telephone complies with Part 68 of

FCC Rules

. Upon request, you must

provide the phone’s FCC registration

number and REN to your telephone

company. These numbers are on the

bottom of the base.

Note: You must not connect your tele-

phone to:

• coin-operated systems

• party-line systems

• most electronic key phone systems

43-1104.fm Page 4 Wednesday, August 18, 1999 8:05 AM

CONTENTS

Installation ............................................................................................................... 6

Mounting the Phone ........................................................................................... 6

On a Desk Top ............................................................................................. 6

On a Wall Plate ............................................................................................ 7

Directly on the Wall ...................................................................................... 8

Connecting and Charging the Battery Pack ..................................................... 10

Setting the Dialing Mode .................................................................................. 11

Setting the Ringer’s Tone and Volume ............................................................. 12

Operation ............................................................................................................... 13

Making and Receiving Calls ............................................................................. 13

Setting the Handset Volume ............................................................................. 13

Using Redial ..................................................................................................... 13

Using Mute ....................................................................................................... 14

Using Flash ...................................................................................................... 14

Using Tone Services on a Pulse Line ............................................................... 14

Paging .............................................................................................................. 15

Memory Dialing ................................................................................................ 15

Storing a Number in Memory ..................................................................... 15

Entering a Pause ....................................................................................... 16

Dialing a Memory Number ......................................................................... 16

Chain-Dialing Service Numbers ................................................................. 17

Testing Stored Emergency Numbers ......................................................... 17

Using a Headset ............................................................................................... 17

Troubleshootin

.................................................................................................... 18

Care and Maintenance .......................................................................................... 20

Replacing the Battery Pack .............................................................................. 21

The FCC Wants You to Know ........................................................................... 22

Lightning ........................................................................................................... 22

43-1104.fm Page 5 Wednesday, August 18, 1999 8:05 AM

INSTALLATION

MOUNTING THE PHONE

You can place the ET-1104’s base on a

desk or table, mount it on a standard

wall plate, or mount it directly on a wall.

Choose a location that is:

• near an AC outlet

• near a modular telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of sev-

eral locations, try each to see which

provides the best performance.

Caution: The supplied RadioShack AC

adapter was designed specifically for

your ET-1104. Use only the supplied

adapter.

Notes:

• Your telephone connects directly to

a modular telephone line jack. If

your phone line jack is not modular,

you can update the wiring yourself,

using jacks and adapters available

at your local RadioShack store. Or,

you can let the phone company up-

date the wiring for you.

• The USOC number of the jack to be

installed is RJ11C, or RJ11W for a

wall plate jack.

On a Desk Top

Follow these steps when you place the

base on a desk or table.

1. Insert the bracket’s tabs into the

base’s upper tab slots, then press

down on the bracket’s clips and in-

sert them into the clip slots.

2. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

3. Plug the cord’s other end into a

modular phone line jack.

Upper Tab Slots

Clips

Clip Slots

43-1104.fm Page 6 Wednesday, August 18, 1999 8:05 AM

4. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

5. Route the adapter’s cord through

the strain relief slot on the bracket.

6. Plug the adapter into a standard AC

outlet.

7. Lift the base’s antenna to a vertical

position.

On a Wall Plate

1. Insert the bracket’s tabs into the

base’s lower tab slots, then press

down on the bracket’s clips and in-

sert them into the clip slots.

2. Plug one end of the supplied short

modular cord into the TEL LINE jack

on the back of the base.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

4. Route the adapter’s cord through

the narrow groove on the bottom of

the bracket.

Strain

Relief Slot

Lower

Clip Slots

Tabs Tab

Slots

Narrow

Groove

43-1104.fm Page 7 Wednesday, August 18, 1999 8:05 AM

5. Plug the modular cord into the wall

plate jack, then align the bracket’s

keyhole slots with the wall plate

studs and slide the base downward

to secure it.

6. Plug the adapter into a standard AC

outlet.

7. Press and lift out the handset hold-

er, rotate it 180×, then snap it back

into place.

8. Lift the base’s antenna to a vertical

position.

Directly on the Wall

For this mounting method, you need two

flat-head screws (not supplied) with

heads that fit into the keyhole slots on

the bottom of the base.

1. Drill two holes 315/16

inches (100 mm)

apart. Then thread a

screw into each hole,

letting the heads ex-

tend about 3/16 inch (5

mm) from the wall.

2. Insert the bracket’s tabs into the

base’s lower tab slots, then press

down on the bracket’s clips and in-

sert them into the clip slots.

3. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

3/16"

315/16"

Lower

Clip Slots

Tabs Tab

Slots

43-1104.fm Page 8 Wednesday, August 18, 1999 8:05 AM

4. Route the modular cord through the

wide groove on the bottom of the

bracket.

5. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

6. Route the adapter’s cord through

the narrow groove on the bottom of

the bracket.

7. Align the keyhole slots with the

mounting screws and slide the base

downward to secure it.

8. Plug the modular cord into a modu-

lar phone line jack.

9. Plug the adapter into a standard AC

outlet.

10. Press and lift out the handset hold-

er, rotate it 180×, then snap it back

into place so it holds the handset.

11. Lift the base’s antenna to a vertical

position.

Wide

Groove

Narrow

Groove

43-1104.fm Page 9 Wednesday, August 18, 1999 8:05 AM

CONNECTING AND

CHARGING THE BATTERY

PACK

The ET-1104 comes with a rechargeable

nickel-cadmium battery pack in the

handset but not connected. Before using

your phone, you must connect the bat-

tery pack and then charge it for about 24

hours.

1. Press down and slide off the cover

as shown.

2. Unfasten the plastic retainer strap

and lift the battery pack out of the

compartment. Plug the battery

pack’s connector into the socket in

the compartment. The connector fits

only one way.

3. Place the battery pack inside the

compartment and fasten the retainer

strap.

4. Replace the cover.

To charge the battery pack, place the

handset on the base either face-up or

face-down. The CHARGE indicator on

the base lights.

When the handset beeps and the LOW

BATT indicator on the handset flashes,

recharge the battery pack.

Notes:

• When you first use the phone after

charging or recharging the battery

pack, you might hear an error tone

(3 short beeps) or the phone might

not work when you press TALK. If

this happens, return the handset to

the base for a few seconds. This re-

sets the security access-protection

code.

• If the battery pack gets completely

discharged or the base loses power

while the handset is away from it,

the security access-protection code

needs to be reset. To reset the secu-

rity code, place the handset on the

base. If it was the handset that lost

power, leave the handset on the

base to charge the battery pack.

• If the CHARGE indicator flickers

rapidly when you place the handset

on the base, be sure the battery

pack and AC adapter are correctly

and securely connected.

CHARGE Indicator

43-1104.fm Page 10 Wednesday, August 18, 1999 8:05 AM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-687 Bedienungsanleitung

Radio Shack

Radio Shack ET-539 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Telephone Bedienungsanleitung

Radio Shack

Radio Shack 43-5862 Bedienungsanleitung

Radio Shack

Radio Shack 43-3576 Bedienungsanleitung

Radio Shack

Radio Shack 43-1122 Bedienungsanleitung

Radio Shack

Radio Shack 43-3581 Bedienungsanleitung

Radio Shack

Radio Shack ET-917 Bedienungsanleitung

Radio Shack

Radio Shack Wireless Phone Jack System Bedienungsanleitung

Radio Shack

Radio Shack 43-3812 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1016 Bedienungsanleitung

Radio Shack

Radio Shack 43-3815 Bedienungsanleitung

Radio Shack

Radio Shack pmn Bedienungsanleitung

Radio Shack

Radio Shack ET-518 Bedienungsanleitung

Radio Shack

Radio Shack ET-926 Bedienungsanleitung

Radio Shack

Radio Shack ET-598 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless... Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Radio Shack

Radio Shack ET-545 Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack 43-1107 Bedienungsanleitung

Radio Shack

Radio Shack ET-1126 Bedienungsanleitung

Radio Shack

Radio Shack ET-1125 Bedienungsanleitung

Radio Shack

Radio Shack ET-3504 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung