Radio Shack ET-1119 Bedienungsanleitung

Cat. No. 43-1119

OWNER’S MANUAL

Please read before using this equipment.

ET-1119

2.4 GHz Digital Spread Spectrum Cordless

with Caller ID and Call Waiting

43-1119.fm Page 1 Thursday, September 16, 1999 1:58 PM

FEATURES

Your RadioShack ET-1119 2.4 GHz Dig-

ital Spread Spectrum Cordless Tele-

phone uses advanced cordless

telephone technology to give you superi-

or audio quality and extended range.

The ET-1119’s Caller ID unit records

each caller’s telephone number (and

name, if available in your area) and the

date and time of the call, as provided by

your local phone company to Caller ID

service subscribers. If you subscribe to

Call Waiting with Caller ID, the ET-1119

can show you the incoming caller infor-

mation, even when you are already on

the phone.

Your ET-1119 has these features:

2.4 GHz Operation — provides longer

range and less interference than many

other cordless phones.

Spread Spectrum Technology —

spreads the signal across several fre-

quencies, providing additional security

for your phone conversations.

Caller ID Memory — stores up to 50

Caller ID records.

3-Line Liquid Crystal Display — lets

you view an entire Caller ID record on

one screen.

Second Battery Charger on the Base

— you can charge one battery pack in

the base unit while you operate the

handset with the other. The battery pack

in the charger slot also supplies power

to the base unit in case of power failure.

Headset Jack — lets you use an option-

al headset for hands free use.

Page — lets you send a signal from the

base to the handset to page someone or

to help you locate the handset if it is mis-

placed.

10-Number Memory Dialing — lets you

store up to 10 numbers in memory for

easy dialing.

Volume Control — lets you adjust the

volume you hear through the handset.

Adjustable Ringer — lets you choose

high or low volume for the ET-1119’s

ringer.

Facedown or Faceup Handset Charg-

ing — you can place the handset on the

base facedown or faceup (to show the

Caller ID display, for example).

Ample Talk and Standby Time — the

supplied battery (when fully charged)

provides about 4 hours of talk time or 7

days of standby time.

20 Channels — automatically selects a

clear channel when you make or answer

a call.

Redial — lets you quickly redial the last

number dialed.

RadioShack is a registered trademark used by Tandy Corporation.

43-1119.fm Page 2 Thursday, September 16, 1999 1:58 PM

Security Access-Protection Code —

automatically prevents other cordless

phone users from using your phone line

while the handset is off the base.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Tone/Pulse Dialing — lets you use ei-

ther type of service, and you can easily

switch from pulse to tone dialing for

long-distance, bank-by-phone, or other

special services.

Auto Talk — you can set the phone so

you can answer a call simply by lifting

the handset from the base.

Any Key Answer — you can set the

phone so you can press any key on the

handset to answer a call when the hand-

set is away from the base.

Hearing-Aid Compatibility — lets you

use your phone with hearing aids that

have a T (telephone) switch.

This telephone has been tested and

found to comply with all applicable FCC

standards and is UL listed.

Important Caller ID Information

To use the phone’s Caller ID and Caller

ID with Call Waiting features, you must

be in an area where those services are

available and you must subscribe to

those services through your local phone

company.

Where Caller ID is offered, one or more

options are generally available:

• caller’s number only

• caller’s name only

• caller’s name and number

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to rain

or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

43-1119.fm Page 3 Thursday, September 16, 1999 1:58 PM

Important: When handset’s power is

lost, the ET-1119 loses the security ac-

cess-protection code connection be-

tween the base and the handset. Put the

handset on the base briefly to restore

this connection so you can use the

handset.

READ THIS BEFORE

INSTALLATION

We have designed your phone to con-

form to federal regulations and you can

connect it to most phone lines. However,

each device that you connect to the tele-

phone line draws power from the line.

We refer to this power draw as the

phone’s ringer equivalence number, or

REN. The REN is on the bottom of your

phone. If you use more than one phone

or other device on the line, add up all the

RENs. If the total is more than five (three

in rural areas), your phones might not

ring. If ringer operation is impaired, re-

move one of the devices from the line.

FCC STATEMENT

Your telephone complies with Part 68 of

FCC Rules. You must, upon request,

provide the FCC registration number

and the REN to your phone company.

These numbers are on the bottom of the

base.

You must not connect your phone to any

of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

This equipment complies with the limits

for a Class B digital device as specified

in Part 15 of

FCC Rules

. These limits

provide reasonable protection against

radio and TV interference in a residential

area. However, your equipment might

cause TV or radio interference even

when it is operating properly. To elimi-

nate interference, you can try one or

more of the following corrective mea-

sures.

• Reorient or relocate the receiving

antenna.

• Increase the distance between the

equipment and the radio or TV.

• Use outlets on different electrical cir-

cuits for the equipment and the

Radio or TV.

Consult your local RadioShack store if

the problem still exists.

43-1119.fm Page 4 Thursday, September 16, 1999 1:58 PM

CONTENTS

Installation ............................................................................................................... 6

Mounting the Phone ........................................................................................... 6

On a Desk .................................................................................................... 6

On a Wall Plate or Wall ................................................................................ 7

Installing and Charging the Battery Pack ........................................................... 8

Second Battery Pack ................................................................................. 10

Setting the Dialing Mode .................................................................................. 10

Setting the Ringer’s Volume ............................................................................. 11

Setting Auto Talk .............................................................................................. 11

Turning Caller ID/Call Waiting On/Off ............................................................... 11

Storing Your Area Code ................................................................................... 12

Operation ............................................................................................................... 13

Making and Receiving Calls ............................................................................. 13

Adjusting the Handset Volume ......................................................................... 13

Using Redial ..................................................................................................... 13

Using Flash ...................................................................................................... 14

Using Tone Services on a Pulse Line ............................................................... 14

Paging .............................................................................................................. 14

Memory Dialing ................................................................................................ 14

Storing a Name and Number in Memory ................................................... 15

Editing or Deleting a Number in Memory ................................................... 16

Entering a Pause ....................................................................................... 16

Reviewing Memory Numbers ..................................................................... 17

Dialing a Memory Number ......................................................................... 17

Chain-Dialing Service Numbers ................................................................. 17

Testing Stored Emergency Numbers ......................................................... 17

Using a Headset ............................................................................................... 17

Caller ID Operation ............................................................................................... 19

Reviewing Caller ID Records ........................................................................... 19

Caller ID Messages ................................................................................... 20

Storing a Caller ID Record to Memory ............................................................. 20

Dialing Numbers from a Caller ID Record ........................................................ 21

Deleting Caller ID Records ............................................................................... 21

Troubleshooting .................................................................................................... 22

Care and Maintenance .......................................................................................... 24

Replacing the Battery Pack .............................................................................. 25

The FCC Wants You to Know ........................................................................... 26

Lightning ........................................................................................................... 26

43-1119.fm Page 5 Thursday, September 16, 1999 1:58 PM

INSTALLATION

MOUNTING THE PHONE

You can place the ET-1119’s base on a

desk or table, mount it on a standard

wall plate, or mount it directly on a wall.

Choose a location that is:

• near an AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the hand-

set’s range. If you have a choice of sev-

eral locations, try each to see which

provides the best performance.

Cautions:

You must use a Class 2

power source that supplies

9V DC and delivers at least

500 mA. Its center tip must be set to

positive and its plug must fit the ET-

1119's DC IN 9V jack. The supplied

adapter meets these specifications.

Using an adapter that does not meet

these specifications could damage

the ET-1119 or the adapter.

• Always connect the AC adapter to

the ET-1119 before you connect it to

AC power. If you should ever need

to disconnect the power, disconnect

the adapter from AC power before

you disconnect it from the ET-1119.

• The supplied RadioShack adapter

was designed specifically for your

ET-1119. Use only the supplied

adapter.

Notes:

• Your telephone connects directly to

a modular phone line jack. If your

phone line jack is not a modular

jack, you can update the wiring

yourself, using jacks and adapters

available from your local

RadioShack store. Or, you can let

the telephone company update the

wiring for you.

• The USOC number of the jack to be

installed is RJ11C, or RJ11W for a

wall plate jack.

On a Desk

Follow these steps when you place the

base on a desk or table.

1. Insert the bracket’s tabs into the

base’s upper tab slots, then press

down on the bracket’s clips and

insert them into the clip slots.

43-1119.fm Page 6 Thursday, September 16, 1999 1:58 PM

2. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

3. Plug the modular cord’s other end

into a modular phone line jack.

4. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

5. Route the adapter’s cord through

the strain relief slot on the bottom of

the base.

6. Plug the adapter into a standard AC

outlet.

7. Lift the base’s antenna to a vertical

position.

On a Wall Plate or Wall

1. Insert the bracket’s tabs into the

base’s lower tab slots as shown,

then press down on the bracket’s

clips and insert them into the clip

slots.

2. Plug one end of the supplied short

modular cord into the TEL LINE jack

on the back of the base as in “On a

Desk,” Step 2.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack

(see “On a Desk” on Page 6, Step

4).

4. Route the adapter and modular

cords through the grooves on the

bottom of the base.

Strain

Relief

Slot

Grooves

43-1119.fm Page 7 Thursday, September 16, 1999 1:58 PM

5. Plug the modular cord’s other end

into the wall plate jack, then align

the base’s keyhole slots with the

wall plate studs and slide the base

downward to secure it.

6. Plug the adapter into a standard AC

outlet.

7. Press and lift out the handset

holder, rotate it 180°, then snap it

back into place so it holds the hand-

set.

8. Lift the base’s antenna to an upright

(vertical) position.

Note: To mount the ET-1119 directly on

a wall, you need two screws (not sup-

plied) with heads that fit into the keyhole

slots on the bottom of the base.

Follow the steps under “On a Wall Plate

or Wall” on Page 7, then apply these ad-

ditional instructions for placement on a

wall.

1. Drill two holes 315/16

inches (100 mm) apart.

Then thread a screw into

each hole, letting the

heads extend about 5/16

inch (8 mm) from the

wall.

2. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

3. Align the base’s keyhole slots with

the mounting screws and slide the

base downward to secure it.

INSTALLING AND

CHARGING THE BATTERY

PACK

The ET-1119 comes with a recharge-

able Ni-Cd battery pack. Before using

your phone, you must install the battery

pack, then charge it for about 24 hours.

5/16

315/16

43-1119.fm Page 8 Thursday, September 16, 1999 1:58 PM

Follow these steps to install and charge

the battery pack.

1. Press down and slide off the battery

pack compartment cover.

2. Install the battery pack so the slots

on the upper ends engage with the

tabs on the compartment.

3. Replace the cover.

To charge the battery pack, place the

handset either faceup or facedown on

the base. The CHARGE/IN USE indica-

tor on the base lights and Total:00

appear on the handset display.

Recharge the battery pack when Low

Battery flashes on the display.

Important: Be sure the battery pack is

properly connected before you try to

charge it. The CHARGE/INUSE indica-

tor lights when the handset is on the

base, even if the battery pack is not con-

nected.

Notes:

• When you first use the phone after

charging or recharging the battery

pack, the phone might not work and

you might hear an error tone when

you press TALK. If this happens,

return the handset to the base for

about 5 seconds. This resets the

security access-protection code.

• If the handset’s battery pack is com-

pletely depleted, the security

access-protection code might be

lost. To reset the code, return the

handset to the base for about 5 sec-

onds.

• Using a pencil eraser, clean the

charging contacts on the handset

and the base about once a month.

• If the battery pack becomes weak

during a call, the handset beeps

every 3 seconds and Low Bat-

tery flashes. When this happens,

you cannot make another call on the

phone until you recharge the battery

pack.

• About once a month, fully discharge

the battery pack by keeping the

handset off the base until Low

Battery flashes. Otherwise, the

battery pack loses its ability to fully

recharge.

CHARGE/

IN USE

Indicator

43-1119.fm Page 9 Thursday, September 16, 1999 1:58 PM

• If the display is blank and the phone

does not work, recharge the battery

pack. (The battery power might be

too low to light the display.)

• If you are not going to use your

phone for a month or longer, discon-

nect the battery pack. This

increases the battery pack’s usable

life.

• The supplied battery pack should

last for about a year. When it loses

its ability to fully recharge, order a

replacement battery pack from your

local RadioShack store (see

“Replacing the Battery Pack” on

Page 25).

Second Battery Pack

The ET-1119 is supplied with two bat-

tery packs. You can charge the second

battery pack in the slot on the side of the

base while you are using the first one in

the handset. Position the battery pack

so the side with the contacts faces up,

and insert it into the charging slot until it

clicks into place.

Charge the battery pack for 24 hours.

When charging is complete, pull up on

the latch to remove the battery pack

from the slot.

The battery pack in the charging slot

also works as an auxiliary power source

for the base in case of power failure.

SETTING THE DIALING

MODE

Set PULSE/TONE on the back of the

base for the type of service you have. If

you are not sure which type you have,

once the battery pack is fully charged,

perform this test.

1. Be sure PULSE/TONE is set to

TONE.

2. Lift the handset, press TALK, and

listen for a dial tone.

3. Press any number other than 0.

Note: If your phone system requires that

you dial an access code (9, for example)

before you dial an outside number, do

not dial the access code either.

43-1119.fm Page 10 Thursday, September 16, 1999 1:58 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 43-3570 Bedienungsanleitung

Radio Shack

Radio Shack RT-551 Bedienungsanleitung

Radio Shack

Radio Shack 43-329 Bedienungsanleitung

Radio Shack

Radio Shack 43-3815 Bedienungsanleitung

Radio Shack

Radio Shack 43-3887 Bedienungsanleitung

Radio Shack

Radio Shack 43-3556 Bedienungsanleitung

Radio Shack

Radio Shack 43-3817 Bedienungsanleitung

Radio Shack

Radio Shack ET-1126 Bedienungsanleitung

Radio Shack

Radio Shack 43-164 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1010 Bedienungsanleitung

Radio Shack

Radio Shack ET-1118 Bedienungsanleitung

Radio Shack

Radio Shack ET-3504 Bedienungsanleitung

Radio Shack

Radio Shack 43-324 Bedienungsanleitung

Radio Shack

Radio Shack ET-905 Bedienungsanleitung

Radio Shack

Radio Shack ET-539 Bedienungsanleitung

Radio Shack

Radio Shack 43-5560 Bedienungsanleitung

Radio Shack

Radio Shack ET-550 Bedienungsanleitung

Radio Shack

Radio Shack 43-3576 Bedienungsanleitung

Radio Shack

Radio Shack Sprint SP-514 Bedienungsanleitung

Radio Shack

Radio Shack 43-3536 Bedienungsanleitung

Radio Shack

Radio Shack 43-3549 Bedienungsanleitung

Radio Shack

Radio Shack 43-3571 Bedienungsanleitung

Radio Shack

Radio Shack ET-917 Bedienungsanleitung

Radio Shack

Radio Shack ET-1106 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung