Radio Shack ET-1118 Bedienungsanleitung

Cat. No. 43-1118

OWNER’S MANUAL

Please read before using this equipment.

ET-1118

900 MHz Digital Spread Spectrum Cordless

Telephone with Caller ID and Call Waiting ID

FEATURES

Your RadioShack ET-1118 900 MHz

Digital Spread Spectrum Cordless Tele-

phone uses the most advanced cordless

telephone technology to give you superi-

or audio quality and extended range.

The ET-1118’s Caller ID unit records

each caller’s telephone number (and

name, if available in your area) and the

date and time of the call, as provided by

your local phone company to Caller ID

service subscribers. And, if you sub-

scribe to Call Waiting with Caller ID, the

ET-1118 shows you the incoming caller

information, even when you are already

on the phone.

Your ET-1118 has these features:

900 MHz Operation — provides longer

range and less interference than many

other cordless phones.

Spread Spectrum Technology —

spreads the signal across several fre-

quencies, providing additional security

for your phone conversations.

Caller ID Memory — stores up to 50

Caller ID records.

Headset Jack — lets you connect an

optional headset (available from your lo-

cal RadioShack store) for hands-free

convenience.

Speakerphone — lets you make or an-

swer calls without using the handset.

Dual Keypads — a full set of keys on

both the handset and base let you use

either keypad to operate the phone.

3-Line Liquid Crystal Display — lets

you view an entire Caller ID record on

one screen.

Two-Way Intercom/Paging System —

lets you send a signal from the base to

the handset, or from the handset to the

base, to page someone or locate the

handset when it is away from the base.

If someone answers, you can use the

ET-1118 as an intercom.

20-Number Memory Dialing — lets you

store up to 20 numbers (10 each in the

handset and base) in memory for easy

dialing.

Volume Control — lets you adjust the

volume you hear through the handset.

Adjustable Ringers — you can set dif-

ferent volumes for the handset and base

ringers.

Ample Talk and Standby Time — the

supplied battery (when fully charged)

provides about 4 hours of talk time or 7

days of standby time.

20 Channels — automatically selects a

clear channel when you make or answer

a call.

RadioShack is a registered trademark used by Tandy Corporation.

Security Access-Protection Code —

automatically prevents other cordless

phone users from using your phone line

while the handset is off the base.

Redial — lets you quickly redial the last

number dialed.

Flash — sends an electronic switch-

hook signal for use with special phone

services, such as Call Waiting.

Tone/Pulse Dialing — lets you use ei-

ther type of service, and you can easily

switch from pulse to tone dialing for

long-distance, bank-by-phone, or other

special services.

Auto Talk — lets you set the handset so

you can answer a call by simply lifting

the handset from the base or by press-

ing any key when the handset is away

from the base.

Hearing-Aid Compatibility — lets you

use your phone with hearing aids that

have a T (telephone) switch.

This telephone is UL listed and has

been tested and found to comply with all

applicable FCC standards.

We recommend you record your

phone’s serial number here. The num-

ber is on the bottom of the base.

Serial Number __________________

IMPORTANT CALLER ID

INFORMATION

To use the phone’s Caller ID and Caller

ID with Call Waiting features, you must

be in an area where those services are

available and you must subscribe to

those services through your local phone

company.

Where Caller ID is offered, one or more

options are generally available:

• caller’s number only

• caller’s name only

• caller’s name and number

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to rain

or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

Important:

• Cordless phones such as this one

require AC power to operate. When

the AC power is off, you cannot dial

out or receive incoming calls using

your ET-1118. To be safe, you

should also have a phone that does

not need AC power to operate (not a

cordless phone) so you can still

make and receive calls if there is an

AC power failure.

• When AC power is lost, the ET-1118

loses the security access-protection

code connection between the base

and the handset. When power is

restored, put the handset on the

base briefly to restore this connec-

tion so you can use the handset.

READ THIS BEFORE

INSTALLATION

Each device that you connect to the

phone line draws power from the phone

line. We refer to this power draw as the

device’s ringer equivalence number, or

REN. The REN is on the bottom of the

base.

If you are using more than one phone or

other device on the line, add up all the

RENs. If the total is more than five, your

phones might not ring. In rural areas, a

total REN of three might impair ringer

operation. If ringer operation is impaired,

remove a device from the line.

FCC STATEMENT

This telephone complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC registration number

and the REN to your phone company.

These numbers are on the bottom of the

base.

Note: You must not connect your phone

to any of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

This phone complies with the limits for a

Class B digital device as specified in

Part 15 of

FCC Rules

. These limits pro-

vide reasonable protection against ra-

dio and TV interference in a residential

area. However, your equipment might

cause TV or radio interference even

when it is operating properly. To elimi-

nate interference, you can try one or

more of the following corrective mea-

sures.

• Reorient or relocate the receiving

antenna.

• Increase the distance between the

equipment and the radio or TV.

• Use outlets on different electrical cir-

cuits for the equipment and the

radio or TV.

Consult your local RadioShack store if

the problem still exists.

CONTENTS

Installation ............................................................................................................... 7

Mounting the Phone ........................................................................................... 7

On a Desk Top ............................................................................................. 7

On a Wall Plate or Wall ................................................................................ 8

Connecting and Charging the Battery Pack ..................................................... 10

Setting the Dialing Mode .................................................................................. 11

Setting the Ringers’ Volume ...................................................................... 11

Using Auto Talk ................................................................................................ 12

Turning Caller ID/Call Waiting On/Off ............................................................... 12

Storing Your Area Code ................................................................................... 13

Telephone Operation ............................................................................................ 14

Making and Receiving Calls with the Handset ................................................. 14

Adjusting the Handset Volume ......................................................................... 14

Making and Receiving Calls with the Speakerphone ....................................... 14

Switching Between the Handset and Speaker ................................................. 14

Using Both the Handset and Speakerphone .................................................... 15

Using Hold ........................................................................................................ 15

Using Mute ....................................................................................................... 15

Using Redial ..................................................................................................... 15

Using Flash ...................................................................................................... 16

Using Tone Services on a Pulse Line ............................................................... 16

Using Page/Intercom ........................................................................................ 16

Transferring a Call between the Handset and Base .................................. 17

Memory Dialing ................................................................................................ 17

Storing a Number in the Handset’s Memory .............................................. 18

Editing or Deleting a Number in the Handset’s Memory ............................ 19

Storing a Number in the Base’s Memory ................................................... 19

Entering a Pause ....................................................................................... 20

Reviewing Memory Numbers (Handset Only) ........................................... 20

Dialing a Memory Number ......................................................................... 20

Chain-Dialing Service Numbers ................................................................. 20

Testing Stored Emergency Numbers ......................................................... 21

Using a Headset ............................................................................................... 21

Caller ID Operation ............................................................................................... 22

Reviewing Caller ID Records ........................................................................... 22

Caller ID Messages ................................................................................... 23

Dialing Numbers from a Caller ID Record ........................................................ 23

Storing a Caller ID Record to the Handset’s Memory ...................................... 23

Deleting Caller ID Records ............................................................................... 24

Troubleshooting .................................................................................................... 25

Care and Maintenance .......................................................................................... 27

Replacing the Battery Pack .............................................................................. 28

The FCC Wants You to Know ........................................................................... 29

Lightning ........................................................................................................... 29

INSTALLATION

MOUNTING THE PHONE

You can place the ET-1118’s base on a

desk or table, mount it on a standard

wall plate, or mount it directly on a wall.

Choose a location that is:

• near an AC outlet

• near a modular telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the phone’s

range. If you have a choice of several lo-

cations, try each to see which provides

the best performance.

Cautions:

You must use a Class 2

power source that supplies

9 volts AC and delivers at

least 500 mA. Its center tip must be

set to positive and its plug must fit

the ET-1118's DC IN 9V jack. The

supplied adapter meets these speci-

fications. Using an adapter that

does not meet these specifications

could damage the ET-1118 or the

adapter.

• Always connect the AC adapter to

the ET-1118 before you connect it to

AC power. When you finish, discon-

nect the adapter from AC power be-

fore you disconnect it from the ET-

1118.

Notes:

• Your telephone connects directly to

a modular telephone line jack. If

your phone line jack is not a modu-

lar jack, you can update the wiring

yourself, using jacks and adapters

available at your local RadioShack

store. Or, you can let the phone

company update the wiring for you.

• The USOC number of the jack to be

installed is RJ11C (RJ11W for a wall

plate).

On a Desk Top

1. Plug one end of the supplied long

modular cord into the TEL LINE jack

on the back of the base.

2. Plug the modular cord’s other end

into a modular telephone line jack.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack on

the back of the base.

4. Route the adapter’s cord through

the strain relief slot on the bottom of

the base.

5. Plug the adapter into a standard AC

outlet.

6. Lift the base’s antenna to a vertical

position.

On a Wall Plate or Wall

1. Insert the two tabs at the top of the

narrow end of the supplied bracket

into the base’s upper tab slots as

shown, then press down on the

bracket’s latches and insert them

into the lower slots.

2. Plug one end of the supplied short

modular cord into the TEL LINE jack

on the back of the base.

3. Insert the supplied AC adapter’s

barrel plug into the DC IN 9V jack.

4. Route the adapter and modular

cords through the grooves on the

bracket.

RING VOL

OF F-LO-HI

RING VOL

OF F-LO -HI

RING VOL

OF F-LO -HI

5. Plug the modular cord’s other end

into the wall plate jack, then align

the bracket’s keyhole slots with the

wall plate studs and slide the base

downward to secure it.

6. Plug the adapter into a standard AC

outlet.

7. Press and lift out the handset

holder, flip it over as shown, then

snap it back into place so it holds

the handset.

8. Lift the base’s antenna to a vertical

position.

Note: To mount the phone directly on a

wall, you need two screws (not supplied)

with heads that fit into the keyhole slots

on the bottom of the base.

Follow Steps 1, 3, 4, and 6–8 under “On

a Wall Plate or Wall,” then follow these

additional instructions for placement on

a wall.

1. Drill two holes 315/16

inches (100 mm)

apart. Then thread a

screw into each hole,

letting the heads

extend about 3/32 inch

(3 mm) from the wall.

2. Plug one end of the supplied long

modular cord into the TEL LINE jack

at the back of the base.

3. Align the bracket’s keyhole slots

with the mounting screws and slide

the base downward to secure it.

RING VOL

OF F-LO -HI

CONNECTING AND

CHARGINGTHE BATTERY

PACK

The ET-1118 comes with a recharge-

able nickel-cadmium battery pack in the

handset but not connected. Before using

your phone, you must connect the bat-

tery pack and then charge it for about 24

hours.

1. Press down and slide off the battery

pack compartment cover as shown.

2. Lift the battery pack out of the com-

partment.

3. Plug the battery pack’s connector

into the socket in the compartment

(the connector fits only one way),

then replace the battery pack.

4. Replace the cover.

To charge the battery pack, place the

handset on the base either faceup or

facedown. The CHARGE indicator on

the base lights and Total:00 appears

on the handset display.

Recharge the battery pack when Low

Battery flashes on the display.

Important: Be sure the battery pack is

properly connected before you try to

charge it. The CHARGE indicator lights

when the handset is on the base, even if

the battery pack is not connected.

Notes:

• When you first use the phone after

charging or recharging the battery

pack, the phone might not work and

you might hear an error tone when

you press TALK. If this happens,

return the handset to the base for

about 5 seconds. This resets the

security access-protection code.

• If the base loses power for 60 min-

utes while the handset is away from

it or the handset’s battery pack is

completely discharged, the security

access-protection code might be

lost. To reset the code, return the

handset to the base for about 5 sec-

onds.

• Using a pencil eraser, clean the

charging contacts on the handset

and the base about once a month.

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum... Bedienungsanleitung

Radio Shack

Radio Shack ET-926 Bedienungsanleitung

Radio Shack

Radio Shack ET-919 Bedienungsanleitung

Radio Shack

Radio Shack 43-1107 Bedienungsanleitung

Radio Shack

Radio Shack pmn Bedienungsanleitung

Radio Shack

Radio Shack ET-1106 Bedienungsanleitung

Radio Shack

Radio Shack TAD-1015 Bedienungsanleitung

Radio Shack

Radio Shack ET-1111 Bedienungsanleitung

Radio Shack

Radio Shack SP-515 Bedienungsanleitung

Radio Shack

Radio Shack Digital Answering System with Caller ID Deluxe and 2.4 GHz Digital Spread Spectrum Cordless... Bedienungsanleitung

Radio Shack

Radio Shack 43-3575 Bedienungsanleitung

Radio Shack

Radio Shack 43-3548 Bedienungsanleitung

Radio Shack

Radio Shack CID-927 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack 43-324 Bedienungsanleitung

Radio Shack

Radio Shack Presidian Bedienungsanleitung

Radio Shack

Radio Shack Digital Spread Spectrum Cordless Telephone with Digital Answering... Bedienungsanleitung

Radio Shack

Radio Shack TAD-729 Bedienungsanleitung

Radio Shack

Radio Shack 43-5862 Bedienungsanleitung

Radio Shack

Radio Shack ET-153 Bedienungsanleitung

Radio Shack

Radio Shack 43-3570 Bedienungsanleitung

Radio Shack

Radio Shack ET-925 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack 43-141 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung