Radio Shack 43-3570 Bedienungsanleitung

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

ENERGYSTAR and the ENERGYSTAR certification mark

are registered US marks.

DirectLink is a registered trademark of Uniden Corporation.

OWNER’S MANUAL Please read before using this equipment.

2.4 GHz Multi-Handset Expandable

Cordless Telephone with Call

Waiting/Caller ID

43-3570

!IMPORTANT !

If an icon appears at the end of a paragraph, go to the box on that page with the

corresponding icon for pertinent information.

o— Warning !— Important — Caution Ô— Note

Hearing-Aid Compatible — Enables use of the phone

with hearing aids that have a T (telephone) switch.

Ample Talk and Standby Time — The supplied battery

(when fully charged) provides about seven hours of talk

time or ten days of standby time.

Distinctive Ring — Allows you to assign a distinctive

ringer to certain memory locations. When an incoming

call is received and the Caller ID information matches

the information in one of the memory locations, the

distinctive ring that has been stored for that particular

caller sounds. (See “Distinctive Ringer Setup” on

page 18)

Speakerphone — lets you conduct a hands-free

conversation using the handset speaker. (See “Making

and Receiving Calls” on page 23)

Convenient Extension Placement — lets you place

accessory handsets (up to four total) anywhere you

have an AC outlet, regardless of phone jack location.

Call Waiting/Caller ID — lets you answer a call even

when you’re on the phone and see who’s calling before

you answer.

Handset Walkie-Talkie — lets you use two handsets

like walkie-talkie, even if you are away from the base unit.

CONTENTS

Introduction ................................... 3

Important Information ................... 4

FCC Statement .................................. 4

Surge Protection ................................ 5

Important Safety Instructions ........ 6

Important Caller ID Information .... 7

Read This Before Installation ............. 7

Installation ..................................... 8

Selecting a Location .......................... 8

Connecting/Charging the Battery

Pack ................................................ 11

Setting Menu Options ................. 13

About the Menu Options .................. 13

Summary of Main Menu Options and

Submenu Option ............................ 13

Setting Up the Menu ........................ 16

Making and Receiving Calls ....... 23

Placing a Call on Hold ..................... 25

Redialing a Call ................................ 25

Adjusting the Handset Ringer,

Earpiece and Speaker Volume ....... 26

Mute Microphone ............................. 27

Tone Dialing Switch over .................. 27

Travelling Out-of-Range ................... 27

Clarity Booster ................................. 28

Privacy Mode ................................... 28

Find Handset ................................... 28

Flash and Call Waiting ..................... 29

Using One Touch

Voice Mail Access .......................... 29

Phonebook .................................. 30

Storing Phone Numbers, Names,

Distinctive Rings, and

Speed Dial ...................................... 30

Steps for Entering Names and

Special Characters ......................... 31

Viewing the Phonebook ................... 33

Making Calls Using the

Phonebook ..................................... 34

Speed Dialing .................................. 34

Editing or Erasing Data .................... 35

Chain Dialing ................................... 36

Caller ID ...................................... 36

Caller ID and CIDCW (Caller ID on

Call Waiting) ................................... 36

Viewing the Caller ID List ................. 37

Deleting a Caller ID Message .......... 38

Using the Caller ID Message List .... 39

Call Waiting Deluxe Features ........... 40

Expanding Your Phone ............... 41

Using the DirectLink Mode ............... 43

3-Way Conferencing ........................ 43

Intercom/Call Transfer Feature ........ 44

Installing the Beltclip ................... 46

Using a Headset ......................... 46

Troubleshooting .......................... 47

Care ............................................ 48

Service and Repair ..................... 48

Introduction

INTRODUCTION

Thank you for purchasing a RadioShack 2.4

GHz Multi Handset Expandable Cordless

Telephone. Unlike other conventional

cordless telephones, your telephone

supports up to four handsets on a single

telephone line. You can add a handset to

any room in your home or office that has an

AC outlet. No more running to the other end

of the house to answer the phone! You can

transfer outside calls to other handsets. If

you subscribe to Call Waiting with Caller ID,

the phone shows you the incoming caller

information, even when you are already

talking on the phone.

Cordless phones require AC power to

operate. When the power is off, you cannot

make or receive calls by using your phone.

You should also have a phone that does not

need AC power to operate (not a cordless

phone), so you can still make and receive

calls if there is an AC power failure. !

!IMPORTANT !

• Your phone operates on

standard radio

frequencies as allocated

by the FCC.

• It is possible for other

radio units operating

nearby on similar

frequencies to

unintentionally intercept

your conversation or

cause interference. This

possible lack of privacy

can occur with any

cordless phone.

As an ENERGYSTAR Partner,

RadioShack Corporation has

determined that this product

meets the ENERGYSTAR guidelines

for energy efficiency.

Important Information

The lightning symbol is intended to alert you to the presence of

uninsulated dangerous voltage within this product’s enclosure that

might be of sufficient magnitude to constitute a risk of electric shock.

Do not open the product’s case.

The exclamation symbol is intended to inform you that important operating

and maintenance instructions are included in the literature accompanying

this product.

WARNING: To reduce the risk of

fire or shock hazard, do not expose

this product to rain or moisture.

CAUTION.CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

RISK OF ELECTRIC

SHOCK DO NOT OPEN

IMPORTANT

INFORMATION

This telephone has been tested and found

to comply with all applicable UL and FCC

standards.

FCC STATEMENT

Your telephone compiles with Part 68 of the

FCC Rules.Upon request, you must provide

the phone’s FCC registration number and

REN to your phone company. These

numbers are on the base unit.

Your phone is not intended to be used with

party-line systems. Connection to party line

service is subject to state tariffs. Contact the

state public utility commission, public

service commission, or corporation

commission for information. Ô

We have designed your phone to conform

to federal regulations, and you can connect

it to most telephone lines. However, each

phone (and each device, such as a

telephone or answering machine) that you

connect to the telephone line draws power

from the telephone line. We refer to this

power draw as the device’s ringer

equivalence number, or REN on the back of

your phone.

If you use more than one phone or other

device on the line, add up all of the RENs. If

the total is more than five (three in rural

areas), your telephones might not ring. If

ringer operation is impaired, remove a

device from the line.

ÔNOTE Ô

You must not connect your

phone to:

• coin-operated systems

• most electronic key

telephone systems

Important Information

In the unlikely event that your phone causes

problems on the phone line, the phone

company can temporarily discontinue your

service. If this happens, the phone company

attempts to notify you in advance. If

advance notice is not practical, the phone

company notifies you as soon as possible

and advises you of your right to file a

complaint with the FCC.

Also, the phone company can make

changes to its lines, equipment, operations,

or procedures that could affect the operation

of this phone. The telephone company

notifies you of these changes in advance, so

you can take the necessary steps to prevent

interruption of your telephone service.

This device complies with part 15 of the

FCC rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference, and (2)

This device must accept any interference

received, including interference that may

cause undesired operation.

Privacy of communications, may not be

ensured when using this phone.

SURGE PROTECTION

Your telephone has built-in protection

circuits to reduce the risk of damage from

surges in telephone line and power line

current. These protection circuits meet or

exceed the FCC requirements. However,

lightning striking the telephone or power

lines can damage your telephone.

Lightning damage is not common.

Nevertheless, if you live in an area that has

severe electrical storms, we suggest that you

unplug your phone when storms approach to

reduce the possibility of damage.

Important Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should

always be followed to reduce the risk of fire, electric shock and injury to

persons, including the following:

1. Do not use this product near water, for example, near a bathtub,

wash bowl, kitchen sink, or laundry tub, in a wet basement or near a

swimming pool.

2. Avoid using a telephone (other than a cordless type) during an

electrical storm. There may be a remote risk of electric shock from

lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the

leak.

4. Use only the power cord and batteries indicated in this manual.

Do not dispose of batteries in a fire. They may explode. Check with

local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

Important Caller ID Information

IMPORTANT CALLER

ID INFORMATION

To use Caller ID and Call Waiting, you must

be in an area where those services are

available and you must subscribe to those

services through your local phone company.

Where Caller ID is offered, one or more

options are generally available:

• caller’s number only

• caller’s name only

• caller’s name and number

If you subscribe to Call Waiting ID and

Caller ID, the system can show you the

incoming caller information, even when you

are already talking on the phone.

READ THIS BEFORE

INSTALLATION

We have designed your phone to conform

to federal regulations and you can connect it

to most phone lines. However, each device

that you connect to the telephone line draws

power from the line. We refer to this power

draw as the phone’s ringer equivalence

number, or REN. The REN is on the bottom

of your phone.

If you use more than one phone or other

device on the line, add up all the RENs. If

the total is more than five (three in rural

areas), your phones might not ring. If ringer

operation is impaired, remove one of the

devices from the line.

Installation

INSTALLATION

Before using your phone, carefully peel the

protective film off the display. The film

protects the handset window during

shipment and is not necessary for use.

SELECTING A LOCATION

You can place the phone’s base on a desk

or table, or mount it on a standard wall plate

or directly on a wall. Select a location that

is:Ô

• near an accessible AC outlet

• near a telephone line jack

• out of the way of normal activities

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the handset’s

range. If you have a choice of several

locations, try each to see which provides the

best performance.

Your telephone connects directly to a

modular telephone line jack. If your

telephone wiring does not have a modular

jack, you can update the wiring yourself

using jacks and adapters (available at your

local RadioShack store), or have the

telephone company update the wiring for

you. You must use compatible modular

jacks that are compliant with Part 68 of FCC

Rules.Ô

ÔNOTES Ô

• If your home has

specially wired alarm

equipment connected to

the telephone line, be

sure that installing the

system does not disable

your alarm equipment.

If you have questions

about what will disable

alarm equipment,

contact your telephone

company or a qualified

installer.

• The USOC number of

the jack to be installed is

RJ11C (or RJ11W for a

wall plate jack).

Installation

On a Desk Top

1. Plug one end of

the supplied long

modular cord into

the TEL LINE jack

on the back of the

base.

2. Plug the modular

cord’s other end

into a modular

phone line jack.

3. Insertthesupplied

AC adapter’s

barrel plug into the DC IN 9V jack on the

back of the base. 

4. Route the adapter’s cord through the

strain relief slot on the base, then plug

the adapter into a standard AC outlet.

5. Lift the base’s antenna to a vertical

position.

On a Wall Plate or Wall

To mount the phone directly on a wall, you

need two screws (not supplied) with heads

that fit into the keyhole slots on the base.

Drill two holes 315/16 inches apart. Thread a

screw into each hole, letting the heads

extend about 1/8inch.

1. Detach the bracket from the bottom of

the base.

2. Insert the two

tabs at the top of

the narrow end of

the supplied

bracket into the

base’s upper tab

slots, then press

down on the

bracket’s latches

and insert them

into the lower slots.

TEL

LINE

DC IN 9V CAUTION 

You must use

a Class 2

power source

that supplies 9V DC and

delivers at least 350 mA.

Its center tip must be set

to positive and its plug

must fit the phone’s DC

IN 9V jack. The supplied

adapter meets these

specifications. Using an

adapter that does not

meet these

specifications could

damage the phone or

the adapter.

Installation

3. Plug one end of the supplied modular

cord (short for a wall plate, long for

direct wall mounting) into the TEL LINE

jack on the base’s back.

4. Insert the supplied AC adapter's barrel

plug into the DC IN 9V jack.

5. Route the

adapter and

modular cords

through the

base’s grooves.

6. Forawallplate,

plug the

modular cord’s other end into the wall

plate jack, then align the base’s keyhole

slots with the wall plate studs and slide

the base downward to secure it.

Fordirectwall

mounting,

align the

base’s

keyhole slots

with the

mounting

screws and

slide the base downward to secure it.

7. Plug the adapter into a standard AC

outlet.

8. Lift the base’s antenna to a vertical

position.

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-687 Bedienungsanleitung

Radio Shack

Radio Shack 43-3558 Bedienungsanleitung

Radio Shack

Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Call Waiting/Caller... Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Dual Caller... Bedienungsanleitung

Radio Shack

Radio Shack Big-Button Caller ID Trim Fone 43-3904 Bedienungsanleitung

Radio Shack

Radio Shack 43-3827 Bedienungsanleitung

Radio Shack

Radio Shack ET-1125 Bedienungsanleitung

Radio Shack

Radio Shack Wireless Phone Jack System Bedienungsanleitung

Radio Shack

Radio Shack 43-5862 Bedienungsanleitung

Radio Shack

Radio Shack 43-3856 Bedienungsanleitung

Radio Shack

Radio Shack ET-536 Bedienungsanleitung

Radio Shack

Radio Shack Cordless Phone Bedienungsanleitung

Radio Shack

Radio Shack ET-1124 Bedienungsanleitung

Radio Shack

Radio Shack 43-3533 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Radio Shack

Radio Shack ET-925 Bedienungsanleitung

Radio Shack

Radio Shack 43-3529 Bedienungsanleitung

Radio Shack

Radio Shack ET-1112 Bedienungsanleitung

Radio Shack

Radio Shack CID-927 Bedienungsanleitung

Radio Shack

Radio Shack 43-3577 Bedienungsanleitung

Radio Shack

Radio Shack 43-3526 Bedienungsanleitung

Radio Shack

Radio Shack ET-546 Bedienungsanleitung

Radio Shack

Radio Shack TAD-733 Bedienungsanleitung

Radio Shack

Radio Shack 43-3871 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung