Radio Shack ET-927 Bedienungsanleitung

Cat. No. 43-1097

OWNER’S MANUAL

Please read before using this equipment.

ET-927

Digital Spread Spectrum

900 MHz Cordless Telephone

43-1097a.fm Page 1 Tuesday, August 31, 1999 10:01 PM

FEATURES

Your RadioShack ET-927 Digital Spread

Spectrum 900 MHz Cordless Telephone

uses advanced digital cordless technol-

ogy to give you superior sound quality. It

uses the 900 MHz band, which means

less interference and clearer sound, and

greater range than 46/49 MHz cordless

telephones. Its cordless operation lets

you make or answer calls just about

anywhere in your home or office.

An optional headset jack lets you con-

nect a headset to the handset for hands-

free conversation — perfect for when

you are working in the yard or garage.

Its features include:

900 MHz Operation —provides better

sound and less interference than many

other cordless phones.

3.5-Hour Talk or 7-Day Standby Time

— lets you talk for 3.5 hours or keep the

phone off the base for 7 days without re-

charging (with a fully charged battery

pack).

Digitally Encoded Signal — prevents

other people from picking up your

phone’s signal and listening to your con-

versations.

Two-Way Intercom/Paging System —

lets you send a signal from the base to

the handset, or from the handset to the

base, so you can page someone or eas-

ily locate the handset when it is away

from the base. If someone answers, you

can use the ET-927 as a two-way inter-

com.

20-Number Memory Dialing — lets you

store up to 16 digits in each of 20 mem-

ory locations for easy dialing.

Digital Volume Controls — let you ad-

just the volume of the sound you hear

through the handset and the base.

Out-of-Range Signal — the handset

beeps twice to let you know when you

move out of the base’s operating range.

Security Access Protection Code —

changes each time you place the hand-

set on the base, to minimize the chanc-

es of other cordless phones using your

phone line.

20 Channels — scans the 20 frequency

pairs used between the base and the

handset and automatically selects a

clear channel each time you make or re-

ceive a call.

Any-Key Answer — lets you press any

key on the handset to answer an incom-

ing call.

Programmable Ringers — let you se-

lect from four ringer types and turn the

ringer on or off at both the handset and

the base.

RadioShack is a registered trademark used by Tandy Corporation.

43-1097a.fm Page 2 Tuesday, August 31, 1999 10:01 PM

Mute — prevents the person on the oth-

er end of the phone line from hearing

your conversation with someone in the

room.

Flash — sends an electronic switch-

hook signal for use with special phone

services such as Call Waiting.

Redial — lets you quickly dial the last

number dialed.

Hearing Aid Compatible — lets you

use this telephone with hearing aids that

have a T (telephone) switch.

Three Mounting Options — let you

place the phone on a desk top, or mount

it on a wall plate or directly on a wall.

This phone has been tested and found

to comply with all applicable UL and

FCC standards.

Important:

• Cordless phones such as this one

require AC power to operate. When

AC power is off, you cannot dial out

or receive incoming calls using your

ET-927. For this reason, the ET-927

should not be your only telephone.

To be safe, you should also have a

phone that does not require AC

power to operate (not a cordless

phone), so you can still make and

receive calls if there is an AC power

failure.

• Some cordless phones operate at

frequencies that might cause inter-

ference to nearby TVs and VCRs.

To minimize or prevent such interfer-

ence, the base of the cordless

phone should not be placed near or

on top of a TV or VCR.

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to rain

or moisture.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER OR BACK. NO USER-SERVICE-

ABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED PERSONNEL.

This symbol is intended to alert

you to the presence of uninsu-

lated dangerous voltage within

the product’s enclosure that might

be of sufficient magnitude to con-

stitute a risk of electric shock. Do

not open the product’s case.

This symbol is intended to inform

you that important operating and

maintenance instructions are

included in the literature accom-

panying this product.

43-1097a.fm Page 3 Tuesday, August 31, 1999 10:01 PM

READ THIS BEFORE

INSTALLATION

Your telephone conforms to federal reg-

ulations, and you can connect it to most

telephone lines. However, each device

you connect to the phone line draws

power from the phone line. We refer to

this power draw as the device’s

ringer

equivalence number

, or

REN

. The REN

is on the bottom of the base.

If you are using more than one phone or

other device on the line, add up all the

RENs. If the total is more than five (three

in rural areas), your phone might not

ring. If ringer operation is impaired, re-

move a device from the line.

FCC STATEMENT

This telephone complies with Part 68 of

FCC Rules

. You must, upon request,

provide the FCC Registration Number

and the REN to your phone company.

These numbers are on the label on the

bottom of the base.

You must not connect your phone to any

of the following:

• coin-operated systems

• party-line systems

• most electronic key phone systems

43-1097a.fm Page 4 Tuesday, August 31, 1999 10:01 PM

CONTENTS

Installation ............................................................................................................... 6

Installing the Handset’s Antenna ........................................................................ 6

Selecting a Location ........................................................................................... 6

Preparation ............................................................................................................ 11

Connecting and Charging the Battery Pack ..................................................... 11

Setting the Dialing Mode .................................................................................. 12

Adjusting the Ringers ....................................................................................... 13

Operation ............................................................................................................... 14

Making/Answering Calls ................................................................................... 14

Adjusting the Volume ........................................................................................ 14

Using REDIAL ................................................................................................... 14

Using MUTE ...................................................................................................... 15

Using FLASH .................................................................................................... 15

Using Tone Services on a Pulse Line ............................................................... 15

Special Features ................................................................................................... 16

Memory Dialing ................................................................................................ 16

Using the Intercom ........................................................................................... 17

Using an Optional Headset .............................................................................. 18

Troubleshooting .................................................................................................... 20

Out-of-Range Indications ................................................................................. 22

Care and Maintenance .......................................................................................... 23

Replacing the Battery Pack .............................................................................. 24

The FCC Wants You to Know ........................................................................... 25

Lightning ........................................................................................................... 25

43-1097a.fm Page 5 Tuesday, August 31, 1999 10:01 PM

INSTALLATION

INSTALLING THE

HANDSET’S

ANTENNA

Insert the antenna into the

hole on the top of the hand-

set, then twist the antenna

clockwise until it is secure.

SELECTING A LOCATION

You can place the phone on a desk top,

or mount it on a wall plate or directly on

a wall. Select a location that is:

• near an AC outlet

• near a telephone line jack

• away from electrical machinery,

electrical appliances, metal walls or

filing cabinets, wireless intercoms,

alarms, and room monitors

• away from other cordless phones

The base’s location affects the phone’s

range. If you have a choice of several lo-

cations, try each to see which provides

the best performance.

Notes:

• Your telephone connects directly to

a modular telephone line jack. If

your phone line jack is not a modu-

lar jack, you can update the wiring

yourself, using jacks and adapters

available at your local RadioShack

store. Or, you can let the phone

company update the wiring for you.

• The USOC number of the jack to be

installed is RJ11C (RJ11W if you

want to mount it on a wall plate).

Power the ET-927 using the supplied

9V, 500-mA AC adapter.

Cautions:

You must use a Class 2

power source that supplies

9V DC and delivers at least

500 mA. Its center tip must be set to

positive and its plug must fit the ET-

927's DC 9V jack. The supplied

adapter meets these specifications.

Using an adapter that does not meet

these specifications could damage

the phone or the adapter.

• Always connect the AC adapter to

the ET-927 before you connect it to

AC power. When you finish, discon-

nect the adapter from AC power be-

fore you disconnect it from the

phone.

Placing on a Desk Top

1. Push in the two tabs on the top of

the mounting bracket, then lift off

just the upper part of the bracket.

2. Insert the supplied AC adapter’s

barrel plug into the DC 9V jack on

illus

illus -- enlarge to fill space

43-1097a.fm Page 6 Tuesday, August 31, 1999 10:01 PM

the back of the base, route the

adapter cord through the strain relief

slot and the hole on the bracket,

then push in the mounting bracket’s

upper end to click the bracket into

place.

3. Plug one end of the supplied long

modular cord into the phone line

jack on the back of the base.

4. Plug the AC adapter into a standard

AC outlet.

5. Plug the modular cord’s other end

into a modular phone line jack.

6. For the best reception, raise the

base’s antenna to a vertical position.

Mounting on a Wall Plate

1. Push in the two tabs on the top of

the mounting bracket, then lift off the

entire bracket.

2. Plug one end of the supplied short

modular cord into the phone line

jack on the back of the base, then

press the cord into the center

groove on the bottom of the base.

3. Insert the supplied AC adapter’s

barrel plug into the DC 9V jack on

the back of the base. Then route the

cord through the strain relief slot

illus -- label strain relief

Illus

illus -- enlarge to fill space

Illus

43-1097a.fm Page 7 Tuesday, August 31, 1999 10:01 PM

and press the cord all the way down

into the cord groove on the bottom

of the base.

4. Position the mounting bracket with

the narrow end on top. Route the

short modular cord through the cen-

ter hole of the bracket, and insert

the two tabs at the top of the bracket

into the matching slots on the base’s

back, near the jacks.

5. Press the two tabs at the bottom of

the bracket into the matching slots

on the back of the base to lock the

bracket into place.

6. Plug the modular cord’s other end

into the wall plate’s modular phone

line jack.

7. Align the keyhole slots on the

bracket with the studs on the wall

plate, then slide the base downward

to secure it.

8. Plug the AC adapter into a standard

AC outlet.

9. For the best re-

ception, raise the

base’s antenna to

a vertical position.

illus -- label strain relief

Illus

illus -- show modular

cord already connected

Illus

43-1097a.fm Page 8 Tuesday, August 31, 1999 10:01 PM

Mounting Directly on the Wall

For this mounting method, you need two

wood screws (not supplied) with heads

that fit into the keyhole slots on the

mounting bracket.

1. At the desired mounting

location, drill two holes

315/16 inches (100 mm)

apart. Then thread a

screw into each hole,

letting the heads extend

about 3/16 inch (5 mm)

from the wall.

2. Push in the two tabs on the top of

the mounting bracket, then lift off the

entire bracket.

3. Plug one end of the supplied long

modular cord into the phone line

jack on the back of the base. Then

press the cord into the center

groove on the bottom of the base.

4. Insert the supplied AC adapter’s

barrel plug into the DC 9V jack on

the back of the base, route the cord

through the strain relief slot, then

press the cord into the groove on

the bottom of the base.

5. Position the mounting bracket with

the narrow end on top. Insert the

two tabs at the top of bracket into

the matching slots on the base’s

back, near the jacks.

Press the two tabs at the bottom of

the bracket into the matching slots

on the back of the base to lock the

bracket into place.

3/16

315/16

add illus like that below

Step 1 of previous section

Illus

illus -- label strain relief

Illus

43-1097a.fm Page 9 Tuesday, August 31, 1999 10:01 PM

6. Align the keyhole slots on the

mounting bracket with the screws on

the wall, then slide the base down-

ward to secure it.

7. Plug the ET-927’s AC cord into a

standard AC outlet.

8. Plug the long modular cord into a

modular phone line jack.

9. For the best reception, raise the

base’s antenna to a vertical position.

Illus

illus -- like that below Step

5 of previous section

43-1097a.fm Page 10 Tuesday, August 31, 1999 10:01 PM

Inhaltsverzeichnis

Andere Radio Shack Schnurloses Telefon Handbücher

Radio Shack

Radio Shack ET-550 Bedienungsanleitung

Radio Shack

Radio Shack 43-3880 Bedienungsanleitung

Radio Shack

Radio Shack ET-685 Bedienungsanleitung

Radio Shack

Radio Shack ET-542 Bedienungsanleitung

Radio Shack

Radio Shack TAD 1130 Bedienungsanleitung

Radio Shack

Radio Shack TAD-728 Bedienungsanleitung

Radio Shack

Radio Shack ET-1106 Bedienungsanleitung

Radio Shack

Radio Shack 43-143 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum... Bedienungsanleitung

Radio Shack

Radio Shack ET-532 Bedienungsanleitung

Radio Shack

Radio Shack 43-3814 Bedienungsanleitung

Radio Shack

Radio Shack ET-905 Bedienungsanleitung

Radio Shack

Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting... Bedienungsanleitung

Radio Shack

Radio Shack TAD-733 Bedienungsanleitung

Radio Shack

Radio Shack ET-689 Bedienungsanleitung

Radio Shack

Radio Shack 43-3533 Bedienungsanleitung

Radio Shack

Radio Shack 43-3812 Bedienungsanleitung

Radio Shack

Radio Shack 43-142 Bedienungsanleitung

Radio Shack

Radio Shack ET-531 Bedienungsanleitung

Radio Shack

Radio Shack 43-3577 Bedienungsanleitung

Radio Shack

Radio Shack CID-927 Bedienungsanleitung

Radio Shack

Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital... Bedienungsanleitung

Radio Shack

Radio Shack SP-515 Bedienungsanleitung

Radio Shack

Radio Shack 43-324 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung