ResMed S8 Series Bedienungsanleitung

ResMed S8 Series: Single Battery Connection

BATTERY POWER SOLUTIONS

Page 1 of 2 June 2016

Although ResMed S8 series devices operate from 12V DC the DC input ports run opposite polarity from the FreedomTM

CPAP Battery; therefore, the use of the 150W sine wave power inverter is required in conjunction with battery. DO

NOT connect a ResMed S8 device to the battery without using the sine wave power inverter as doing so will

cause irreversible damage to the PAP device.

REQUIRED COMPONENTS

FreedomTM CPAP Battery Kit

150W Sine Wave Power Inverter (inverter)

CONNECTION INSTRUCTIONS

Plug the DC input cord into the DC OUT jack of the battery.

Plug the inverter into the DC input cord.

Plug the AC power cord of the PAP device into the inverter.

Turn the PAP device on and it should begin functioning.

The digital display screen will show the charge level of the battery. You may press the charge level indicator

button to illuminate this screen. It will stay illuminated for a few seconds at a time.

When not in use disconnect all devices from the battery thus allowing the battery to completely shut down.

PAP AC POWER CORD



150W SINE WAVE

POWER INVERTER



DC INPUT CORD



DC OUT JACK



The inverter can also be used to charge the battery in a vehicle (vehicle does not need to be running) and to power/charge

other small electronic devices with the battery. The inverter is not proprietary to the FreedomTM CPAP Battery and can be

used with other external batteries.

OPTIONAL FREEDOMTM CPAP BATTERY CHARGING ACCESSORIES



Auto Charge DC Cable {BPS DC.CABLE}: Used to charge the battery in a vehicle (vehicle must be running).



SunPower 40W Solar Panel {BPS SP40}: Used to charge the battery using the power of the sun.

BATTERY POWER SOLUTIONS

Page 2 of 2 June 2016

ResMed S8 Series: Dual Battery Connection

Although ResMed S8 series devices operate from 12V DC the DC input ports run opposite polarity from the FreedomTM

CPAP Battery; therefore, the use of the 150W sine wave power inverter is required in conjunction with battery. DO

NOT connect a ResMed S8 device to the battery without using the sine wave power inverter as doing so will

cause irreversible damage to the PAP device.

REQUIRED COMPONENTS

FreedomTM CPAP Battery Kit

FreedomTM CPAP Battery (additional battery only)

150W Sine Wave Power Inverter (inverter)

CONNECTION INSTRUCTIONS

Plug the DC power pigtail cord into the DC OUT jacks of both batteries.

Plug the DC input cord into the DC power pigtail cord.

Plug the inverter into the DC input cord and then plug the AC power cord of the PAP device into the inverter.

Turn the PAP device on and it should begin functioning.

The digital display screen will show the charge level of the battery. You may press the charge level indicator

button to illuminate this screen. It will stay illuminated for a few seconds at a time.

When not in use disconnect all devices from the battery thus allowing the battery to completely shut down.

DC POWER

PIGTAIL CORD



PAP AC POWER CORD



150W SINE WAVE

POWER INVERTER



DC INPUT CORD



DC OUT JACKS



The inverter can also be used to charge the battery in a vehicle (vehicle does not need to be running) and to power/charge

other small electronic devices with the battery. The inverter is not proprietary to the FreedomTM CPAP Battery and can be

used with other external batteries.

OPTIONAL FREEDOMTM CPAP BATTERY CHARGING ACCESSORIES



Auto Charge DC Cable {BPS DC.CABLE}: Used to charge the battery in a vehicle (vehicle must be running).



SunPower 40W Solar Panel {BPS SP40}: Used to charge the battery using the power of the sun.

Inhaltsverzeichnis

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed VPAP ST Bedienungs- und Sicherheitshinweise

ResMed

ResMed HumidAire 3i Bedienungsanleitung

ResMed

ResMed Nox Medical Bedienungsanleitung

ResMed

ResMed Swift FX Bella Bedienungsanleitung

ResMed

ResMed ApneaLink Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed AirCurve 10 ST-A Bedienungsanleitung

ResMed

ResMed VPAP COPD Bedienungs- und Sicherheitshinweise

ResMed

ResMed S9 Series Bedienungsanleitung

ResMed

ResMed C28173 Bedienungsanleitung

ResMed

ResMed Astral Series Bedienungsanleitung

ResMed

ResMed ClimateLineAir 11 Bedienungsanleitung

ResMed

ResMed S9 Escape Technisches Handbuch

ResMed

ResMed AirFit N30 Bedienungsanleitung

ResMed

ResMed Astral 150 Bedienungsanleitung

ResMed

ResMed Mirage SoftGel Bedienungsanleitung

ResMed

ResMed S8 ESCAPE S8 Bedienungsanleitung

ResMed

ResMed S8 AutoScore II Bedienungsanleitung

ResMed

ResMed Lumis HFT Bedienungsanleitung

ResMed

ResMed Swift FX Bella Bedienungsanleitung

ResMed

ResMed Mirage SoftGel Bedienungsanleitung

ResMed

ResMed Astral 150 Bedienungsanleitung

ResMed

ResMed Swift FX Bella Gray Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung