ResMed AirSense 10 Bedienungsanleitung

User guide

 |  |  | 

523 2 4

English 1

ENGLISH

Thank you for choosing a ResMed oximeter adapter.

Intended use

The oximeter adapter connects a NONIN Xpod™oximeter to your device. Oximetry

data (oxygen saturation and pulse rate) is recorded on the SD card inserted into

the device.

The Air10 oximeter adapter shown in illustration A is compatible with

AirSense™10 / AirCurve™10 / Lumis™devices. The oximeter adapter shown

inillustration B is compatible with S9 devices.

The oximeter adapter is intended for home and hospital use.

Read the entire guide before using the oximeter adapter.

Air10 oximeter adapter

Refer to illustration A:

1. Adapter connector

2. Release button

3. Oximeter port.

S9 oximeter adapter

Refer to illustration B:

1. Oximeter port

2. Release buttons

3. Adapter clip

4. Adapter connector.

AirSense 10 / AirCurve 10 /

Lumis

Refer to illustration C:

1. SD Card cover

2. Air filter cover

3. Adapter cover

4. Adapter port.

Refer to illustration D:

1. DC power inlet

2. Adapter clip socket

3. Adapter port

4. SD card slot

5. Alarm (Bilevel alarmed devices only).

Associated accessories

• Xpod oximeter

• Xpod fixation clip

• Finger pulse sensor

• Oximetry accessories pack (including Xpod oximeter, Xpod fixation clip and

3Moximeter soft sensor reusable).

Note: The compatible finger pulse oximeters are calibrated for the display of

functional oxygen saturation.

Save the packaging

Keep all the packaging the oximeter adapter came in.You will need to return the

oximeter adapter, this User Guide and the SD card to your care provider.

Setup

Refer to illustration E or F:

1. Unplug your device from the power outlet.

2. Make sure an SD card is inserted into the SD card slot on your device.

English 3

3. Connect the oximeter adapter to your device.

4. Align the Xpod oximeter connector with the oximeter adapter port and

connectthem.

Not pictured:

5. Connect the Xpod oximeter to the finger pulse sensor.

For instructions refer to the User Guide supplied with the finger pulse sensor.

6. Connect the finger pulse sensor to your finger.

7. Plug your device back into the power outlet.

The AirSense 10 / AirCurve 10 / Lumis device will briefly display the oximeter

software code, eg, SX123-4567.

The S9 device will briefly display Oximeter enabled.

You are now ready to start therapy. For more information, refer to your device

User Guide.

Removing and returning the oximeter adapter and

SD card

1. Remove the sensor from your finger.

2. Unplug your device from the power outlet.

3. Press the release button/s on the side of the oximeter adapter and pull gently

to remove it from the device.

4. Pull the Xpod oximeter out of the oximeter port on the oximeter adapter.

5. Remove the finger sensor cable from the Xpod oximeter.

6. Open the SD card cover and push in the SD card to release it.

7. Place the SD card in the protective folder and send it back to your care provider

together with the oximeter adapter and this User Guide.

Cleaning and maintenance

If you need to, wipe the outside of the oximeter adapter with a clean, dry cloth.

For instructions on how to clean the oximeter and its sensor, refer to the User

Guide supplied with those accessories.

Troubleshooting

If you have any problems, refer to the following troubleshooting topics. If you are

not able to fix the problem, contact your care provider or refer to

www.resmed.com. Do not try to open the oximeter adapter.

Problem/possible cause Solution

AirSense 10 / AirCurve 10 / Lumis: Check your ﬁnger sensor or press OK to continue

without oximetry

S9: Check the oxi sensor or press dial to accept no oximetry data logging

The ﬁnger pulse sensor is not attached

to your ﬁnger

Make sure the ﬁnger pulse sensor is properly attached

according to the instructions supplied with that

accessory.

The sensor cable is not connected to the

Xpod oximeter at the start of therapy.

Disconnect and reconnect the Xpod oximeter connector

and sensor cable according to the instructions supplied

with these accessories.

AirSense 10 / AirCurve 10 / Lumis: Check oximeter connection or press OK to continue

without oximetry

S9: Connect the oxi sensor or press dial to accept no oximetry data logging

The oximeter adapter is not connected

properly or data is not transmitting

correctly.

Remove your oximeter adapter from the device

according to the instructions. Reattach your oximeter

adapter and plug your device back into the power outlet.

English 5

Problem/possible cause Solution

S9: Insert your SD Card or press dial to accept no oximetry data logging

The device cannot detect an SD card and

no oximetry data can be logged or stored.

Make sure that an SD card is correctly inserted in the

SD card slot of your device.

Note: If you need help or to report an unexpected issue, contact a ResMed

representative, ResMedTechnical services or see www.resmed.com.

Technical speciﬁcations

Operating temperature +41°F to +95°F (+5°C to +35°C)

Operating humidity 10 to 95% non-condensing

Operating altitude Refer to your device User Guide for details.

Storage and transport temperature -4°F to 140°F (-20°C to +60°C)

Storage and transport humidity

Air10 oximeter adapter 5 to 95% non-condensing

S9 oximeter adapter 10 to 95% non-condensing

Design life

Air10 oximeter adapter 1825 connections

S9 oximeter adapter 1825 connections

Gross dimensions

Air10 oximeter adapter

(W x D x H)

2.1" x 1.2" x 2.0"

(54 mm x 30 mm x 51 mm)

S9 oximeter adapter

(L x W x H)

1.74" x 2.12" x 0.91"

(44.35 mm x 54.10 mm x 23.30 mm)

Weight

Air10 oximeter adapter 0.95 oz (27 g)

S9 oximeter adapter 0.77 oz (22.1 g)

Oximeter compatibility

Air10 oximeter adapter XPod 3012, XPod 3012LP

S9 oximeter adapter Xpod 3012

Electromagnetic compatibility Refer to your device User Guide for details.

Note: The manufacturer reserves the right to change these specifications without

notice.

Symbols

The following symbols may appear on the oximeter adapter or packaging:

Caution/Warning. Read instructions before use. Manufacturer.

European Authorized Representative.

LOT

Batch code. Catalog

number. Serial number.

IP21

Protection against insertion of fingers and against

vertically dripping water.

IP22

Protected against finger sized objects andagainst

dripping water when tilted up to 15 degrees from specified orientation.

English 7

Humidity limitation. Temperature limitation. China pollution

control logo. Canadian Standards Association. Type BF equipment.

Prescription only (In the US, Federal law restricts these devices to

saleby or on the order of a physician). Atmospheric pressure limitation.

Importer. Medical device.

See symbols glossary at ResMed.com/symbols.

Notes:

• IP21 rating applies only to S9 oximeter adapter.

• IP22 rating applies only to Air10 oximeter adapter.

Environmental information

This device should be disposed of separately, not as unsorted municipal waste.

Todispose of your device, you should use appropriate collection, reuse and

recycling systems available in your region.The use of these collection, reuse

and recycling systems is designed to reduce pressure on natural resources

andprevent hazardous substances from damaging the environment.

If you need information on these disposal systems, please contact your

local waste administration.The crossed-bin symbol invites you to use these

disposal systems. If you require information on collection and disposal of your

ResMeddevice please contact your ResMed office, local distributor or go to

www.resmed.com/environment.

WARNING

•Do not open or modify the oximeter adapter.The oximeter adapter is not

designed to be serviced.There are no serviceable parts inside.

•Only use compatible NONIN™finger pulse oximeters*.

•The finger pulse oximeter and cable needs to be verified for compatibility

with AirSense 10 / AirCurve 10 / Lumis devices, otherwise, patient injury

can result.

•Finger pulse oximeters must not be used with excessive pressure for

prolonged periods as this can cause patient pressure injury.

•The reported values from the finger pulse oximeter are not appropriate

to be used for diagnostic purposes and it shall not be used for vital sign

monitoring.

*For part numbers of compatible oximeter accessories, refer to

www.resmed.com or contact your care provider. For information on how

to use these accessories, refer to the user guide that comes with these

accessories.

CAUTION

•In the US, Federal law restricts this device to sale by or on the order of

aphysician.

•Only use the oximeter adapter as specified in this guide.

•S9 oximeter adapters are specifically designed for use with ResMed S9

devices.

•Air10 oximeter adapters are specifically designed for use with ResMed

AirSense 10 / AirCurve 10 / Lumis devices.

•Do not use liquids to clean any part of the oximeter adapter.

Andere Handbücher für AirSense 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed Ultra Mirage II Bedienungsanleitung

ResMed

ResMed Astral Mobility bag Bedienungsanleitung

ResMed

ResMed Astral 100 Bedienungsanleitung

ResMed

ResMed Mirage Swift II Bedienungsanleitung

ResMed

ResMed AirFit F10 Bedienungsanleitung

ResMed

ResMed AirFit N30 Bedienungsanleitung

ResMed

ResMed ClimateLineAir 11 Bedienungsanleitung

ResMed

ResMed VPAP IV ST Betriebsanleitung

ResMed

ResMed Swift LT Bedienungsanleitung

ResMed

ResMed AirFit F20 Bedienungsanleitung

ResMed

ResMed AirFit F30 Bedienungsanleitung

ResMed

ResMed S9 Escape Technisches Handbuch

ResMed

ResMed S8 Series Bedienungsanleitung

ResMed

ResMed AirSense 11 Bedienungsanleitung

ResMed

ResMed AirFit N20 Bedienungsanleitung

ResMed

ResMed ELITE S8 Bedienungsanleitung

ResMed

ResMed stellar series Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed H5i Bedienungsanleitung

ResMed

ResMed AirFit P10 Bedienungsanleitung

ResMed

ResMed Quattro FX Bedienungsanleitung

ResMed

ResMed AirSense 10 Bedienungsanleitung

ResMed

ResMed Astral Series Bedienungsanleitung

ResMed

ResMed AutoSet S9 Series Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung