ResMed AutoSet CS-A Bedienungs- und Sicherheitshinweise

Welcome Guide

English

AutoSet™CS-A

ADAptive servo-ventilAtor

Welcome

Thank you for choosing the AutoSet CS-A. Before operating the device, please read the entire Welcome

and Information Guides.

Air filter

DC power inlet

SD card slot

Module/Adapter port

Air outlet

AutoSet CS-A at a glance

The AutoSet CS-A system comprises the following elements:

• AutoSet CS-A device • Air tubing • 90W power supply unit • S9 Travel bag • SD card • S9 SD

card protective folder.

Optional components include:

• H5i heated humidifier • Standard air tubing • SlimLine air tubing • 3m air tubing • ClimateLine

heated air tubing • ClimateLineMAX heated air tubing • 30W power supply unit (does not support H5i)

• Power Station II battery pack • DC/DC Converter 24V/90W.

Travelling with the AutoSet CS-A

When travelling with your AutoSet CS-A only:

• Ensure you pack the SlimLine or Standard air tubing as the ClimateLine or ClimateLineMAX heated air

tubing is not designed to connect directly to the device.

• Please ensure you purchase and travel with the approved power cord for the region where you will be

using the device.

English

Setting up

1. Connect the DC plug of the power supply unit to the rear of the device.

2. Connect the power cord to the power supply unit.

3. Plug the other end of the power cord into the power outlet.

4. Connect one end of the air tubing firmly onto the air outlet.

5. Connect the assembled mask system to the free end of the air tubing.

Notes:

•Always ensure that the AutoSet CS-A is placed in an area where the alarm LED indicators are clearly

visible.

•For more information on assembling your mask see your mask user guide.

•Recommended masks are available on www.resmed.com on the Products page under Service &

Support.

AutoSet CS-A basics

Info menu*

Allows you to view your sleep

statistics or exit from the menu.

Setup menu*

Allows you to make changes to

settings or exit from the menu.

Start/Stop button

Starts or stops

treatment.

LCD screen

Displays the menus, treatment

screens and reminders.

Push dial

Turning the dial allows you to scroll through

the menu and change settings. Pushing the

dial allows you to enter into a menu and

confirm your choice.

Alarm mute

Press once to mute

alarms. Press a

second time to

unmute.

Alarm and therapy LEDs

Yellow—flashes during an alarm.

Blue—on during therapy (if enabled

by clinician).

Key:

Home

Humidity Level

Ramp

Heated Tube

Climate Control

Start/Stop

Push dial

Alarm mute

Setup menu

Info menu

AutoSet CS-A basics

Info menu*

Allows you to view your sleep

statistics or exit from the menu.

Setup menu*

Allows you to make changes to

settings or exit from the menu.

Start/Stop button

Starts or stops

treatment.

LCD screen

Displays the menus, treatment

screens and reminders.

Push dial

Turning the dial allows you to scroll through

the menu and change settings. Pushing the

dial allows you to enter into a menu and

confirm your choice.

Alarm mute

Press once to mute

alarms. Press a

second time to

unmute.

Alarm and therapy LEDs

Yellow—flashes during an alarm.

Blue—on during therapy (if enabled

by clinician).

Key:

Home

Humidity Level

Ramp

Heated Tube

Climate Control

Start/Stop

Push dial

Alarm mute

Setup menu

Info menu

*The Info and Setup menus are disabled if S9 Essentials has been

enabled by your clinician.

English

S9 Essentials

S9 Essentials is designed to make device interaction and menu navigation easier for you. If enabled by

the clinician, S9 Essentials disables the Info and Setup functionality so that you can simply start and stop

therapy and adjust ramp, humidification and Climate Control.

Selecting the mask type

To select your type of mask:

4. Turn until the mask

setting that you require is

displayed.

5. Press to confirm your

choice.

6. Push to return to the

HOME screen.

Note: Selecting the mask type is not possible if S9 Essentials has been enabled by your clinician.

1. Press . The SETTINGS

screen is displayed.

2. Turn until Mask is

displayed in blue.

3. Press . The selection is

highlighted in orange.

Adjusting ramp time

Designed to make the beginning of treatment more comfortable, ramp time is the period during which

the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time:

1. From your HOME

screen, turn

until the RAMP

screen is displayed

in blue.

2. Press .

The selection

ishighlighted

inorange.

3. Turn until the

ramp time you

require is displayed.

4. Press to

confirm your choice.

Using Mask Fit

You can use Mask Fit to help you fit your mask properly. This feature delivers CPAP pressure for a

three-minute period, prior to starting treatment, during which you can check and adjust your Mask Fit to

minimise leaks.

1. Fit your mask as described in the mask user guide.

2. From your HOME screen, push and hold for three seconds.

One of the following MASK FIT screens is displayed:

3. If necessary, adjust your mask, mask cushion and headgear until Mask Fit indicates Good.

After three minutes, the pressure reverts to the set pressure and treatment will begin. You can end

Mask Fit at any time by pressing .

S9 Essentials

S9 Essentials is designed to make device interaction and menu navigation easier for you. If enabled by

the clinician, S9 Essentials disables the Info and Setup functionality so that you can simply start and stop

therapy and adjust ramp, humidification and Climate Control.

Selecting the mask type

To select your type of mask:

4. Turn until the mask

setting that you require is

displayed.

5. Press to confirm your

choice.

6. Push to return to the

HOME screen.

Note: Selecting the mask type is not possible if S9 Essentials has been enabled by your clinician.

1. Press . The SETTINGS

screen is displayed.

2. Turn until Mask is

displayed in blue.

3. Press . The selection is

highlighted in orange.

English

Getting started

1. Make sure the power is connected.

2. Adjust the ramp time or humidification level if required.

3. Fit your mask as described in your mask user guide.

4. To start therapy, simply breathe into the mask and/or press .

5. Lie down and arrange the air tubing so that it is free to move if you

turn in your sleep.

6. To stop treatment at any time, remove your mask and/or press .

Notes:

•If your clinician has enabled SmartStart the device will start automatically when you breathe

into the mask and stop automatically when you remove your mask.

•If power is interrupted during treatment, the device automatically restarts therapy when

power is restored.

Viewing the treatment screens

Depending on how the system has been configured and on which mode has been selected, you will see

one of the following example screens once therapy has started:

9H5i humidifier 9H5i humidifier

9ClimateLine/ClimateLineMAX

9Climate Control – Auto

9H5i humidifier

9ClimateLine/ClimateLineMAX

9Climate Control – Manual

9Therapy data without

optional accessories

9Oximetry data via the oximeter

adapter

The pressure bar is marked with fixed vertical lines indicating the expiratory and inspiratory pressures.

While the treatment is ramping (indicated by an orange ramp icon) or variable, the pressure values appear

in orange. When a set pressure is reached these values are displayed in white.

In CPAP mode, only the set pressure is shown.

In ASV mode, the fixed vertical lines on the pressure bar indicate the minimum and maximum pressures.

In ASVAuto mode, the expiratory and inspiratory values shown on the pressure bar are constantly

updated.

English

Viewing the Info menu

The Info menu has a series of screens showing your sleep quality, sleep report and service information.

To view the Info menu, push from your HOME screen.

9In the Sleep Quality screen,

you can always view your

usage hours during the last

session and if enabled by

your clinician, data on Mask

Fit and AHI is displayed.

9In the Sleep Report, only the

period can be changed—

other values are for display

only.

9In the Service information,

the total device run hours

(includes warm-up/cool-down

times for the humidifier) and

the software identifications

are displayed.

To return to the HOME screen, push .

Viewing alarms

The AutoSet CS-A is fitted with an alarm module that continuously monitors both therapy and device

conditions. Alarms are only activated when therapy is running. An alarm condition is indicated by an

audible sound, a flashing yellow alarm LED and a message on the screen. When the device is turned on,

the yellow alarm LED will flash, and the alarm will sound to confirm that the alarm is working.

9Alarm activated 9Alarm cleared 9Multiple alarms

When an alarm activates, a

corresponding alarm message is

displayed. If multiple alarms are

active, the latest alarm message

is displayed and as these are

cleared each message can be

read.

To clear an alarm message,

press . This allows you

to return to the previously

displayed screen. If the alarm

condition remains, the alarm will

re-occur.

Note: Power Fail and Alarm Fail

alarms are cleared by

pressing .

To view the list of alarm

messages, go to the Treatment

screen and press until

Treatment screen 2 is displayed.

Muting the alarm

To mute an alarm for two minutes, press once. If the condition remains, the alarm will sound again

after two minutes. To turn on the alarm again, press a second time. The alarm LED will remain lit for

aslong as the condition remains.

English

Andere Handbücher für AutoSet CS-A

Inhaltsverzeichnis

Andere ResMed Medizinische Geräte Handbücher

ResMed

ResMed Quattro Air NV Bedienungsanleitung

ResMed

ResMed AirFit P10 Bedienungsanleitung

ResMed

ResMed VS III Bedienungsanleitung

ResMed

ResMed SwiftTM FX Bedienungsanleitung

ResMed

ResMed Narval CC Bedienungsanleitung

ResMed

ResMed Tubing Wrap Bedienungsanleitung

ResMed

ResMed Mirage SoftGel Bedienungsanleitung

ResMed

ResMed Ultra Mirage Bedienungsanleitung

ResMed

ResMed Lumis 100 VPAP ST Bedienungsanleitung

ResMed

ResMed AirCurve 10 CS PaceWave Bedienungsanleitung

ResMed

ResMed AirFit F20 Bedienungsanleitung

ResMed

ResMed Swift LT Bedienungsanleitung

ResMed

ResMed AirStart 10 APAP Bedienungsanleitung

ResMed

ResMed AirFit N30i Bedienungsanleitung

ResMed

ResMed AirStart 10 APAP Bedienungsanleitung

ResMed

ResMed Elisee 150 Bedienungsanleitung

ResMed

ResMed AirFit N20 Bedienungsanleitung

ResMed

ResMed Mirage Swift II Bedienerhandbuch

ResMed

ResMed ResLink Bedienungsanleitung

ResMed

ResMed Stellar 100 Bedienungsanleitung

ResMed

ResMed CPAP Bedienungsanleitung

ResMed

ResMed VPAP ST Bedienungsanleitung

ResMed

ResMed Astral 150 Bedienungsanleitung

ResMed

ResMed AirFit N10 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung