RIOTEC LS6302A Bedienungsanleitung

Programming Quick Guide

LS6302A./ FS5022A

Installation

Make sure that the scanner has the correct cable to plug in the PC as

below described:

*Note : Please install PL-2303 driver for USB serial

Auto-sensing setup

The auto-sensing features works

when putting scanner on stand.

When scanner removes from stand,

scanner will become trigger mode.

Reset Configuration to Defaults

(For RS232, USB serial)

If you are unsure of the scanner configuration or have scanned the

incorrect codes, please scan the “Set Factory default” barcode. This

will reset the scanner to its factory defaults.

Default

READING MODE

Scan

(Level) Scan

(Pulse)

*Scan (Level) - A trigger pull activates the laser and decode

processing. The laser remains on and decode processing continues

until a trigger release, a valid decode, or the Laser On Time-out is

reached.

*Scan (Pulse) - A trigger pull activates the laser and decode

processing. The laser remains on and decode processing continues

until a valid decode or the Laser On Time-out is reached.

Redundancy Level

This scanner offers two levels of decode redundancy. Select higher

redundancy levels for decreasing levels of bar code quality. As

redundancy levels increase, the decoder’s aggressiveness decreases.

Select the redundancy level appropriate for the bar code quality.

Redundancy Level 1

barcode must be successfully read twice

before being decoded

Redundancy Level 2

barcode must be successfully read three times

before being decoded:

1D Symbologies On/OFF -1

ENABLE

Code 128 DISABLE

ENABLE

ISBT 128 DISABLE

ENABLE

Code 39 DISABLE

ENABLE Code 39

FULL ASCII DISABLE

ENABLE Trioptic

Code 39 DISABLE

ENABLE

UPC-A DISABLE

ENABLE

UPC-E DISABLE

ENABLE

EAN-8 DISABLE

ENABLE

EAN-13 DISABLE

ENABLE

CODABAR DISABLE

1

1D Symbologies On/OFF-2

ENABLE

Interleaved 25 DISABLE

ENABLE

Discrete 25 DISABLE

ENABLE

MSI DISABLE

ENABLE

Chinese 25 DISABLE

ENABLE

Matrix 25 DISABLE

ENABLE

GS1 DataBar DISABLE

ENABLE GS1 DataBar

Limited DISABLE

ENABLE GS1 DataBar

Expanded DISABLE

1D Symbologies On/OFF -3

ENABLE Composite

CC-C DISABLE

ENABLE Composite

CC-A/B DISABLE

ENABLE Composite

TLC 39 DISABLE

ENABLE

Code 32 DISABLE

ENABLE

CODE 93 DISABLE

ENABLE

CODE 11 DISABLE

ENABLE

Interleaved 25 DISABLE

ENABLE

Discrete 25 DISABLE

Information in this document is subject to change without notice.

For more information, please visit:

www.riotec.com.tw R_140708_01

2

Dieses Handbuch passt für folgende Modelle

Andere RIOTEC Barcode-Lesegerät Handbücher

RIOTEC

RIOTEC iLS6302NBU Bedienungsanleitung

RIOTEC

RIOTEC FS5102N Bedienungsanleitung

RIOTEC

RIOTEC iDC9600C Bedienungsanleitung

RIOTEC

RIOTEC iCR6300CBQ Bedienungsanleitung

RIOTEC

RIOTEC iDC9608K Bedienungsanleitung

RIOTEC

RIOTEC iDC9502K Bedienungsanleitung

RIOTEC

RIOTEC FS5108J Bedienungsanleitung

RIOTEC

RIOTEC iDC9607L Bedienungsanleitung

RIOTEC

RIOTEC DC9253AP Bedienungsanleitung

RIOTEC

RIOTEC RIOSCAN iLS6303AS Bedienungsanleitung

RIOTEC

RIOTEC RIOSCAN iCR6307AS Bedienungsanleitung

RIOTEC

RIOTEC iLS6300VBQ Bedienungsanleitung

RIOTEC

RIOTEC iLS6300VBU Bedienungsanleitung

RIOTEC

RIOTEC DC9270 Bedienungsanleitung

RIOTEC

RIOTEC DC9257LP Bedienungsanleitung

RIOTEC

RIOTEC CR6327A Bedienungsanleitung

RIOTEC

RIOTEC LS6300 Bedienungsanleitung

RIOTEC

RIOTEC DC9273A Bedienungsanleitung

RIOTEC

RIOTEC iDC9273A Bedienungsanleitung

RIOTEC

RIOTEC iDC9500K Bedienungsanleitung

RIOTEC

RIOTEC FS5020E Bedienungsanleitung

RIOTEC

RIOTEC iCR6307ABM Bedienungsanleitung

RIOTEC

RIOTEC LS6000B series Bedienungsanleitung

RIOTEC

RIOTEC iLS6300JB Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung