Rockwell Automation Allen-Bradley FLEX 5000 Series Bedienungsanleitung

FLEX 5000 EtherNet/IP

Adapter

Catalog Numbers 5094-AENTR, 5094-AENTRXT, 5094-

AEN2TR, 5094-AEN2TRXT, 5094-AENSFPR, 5094-

AENSFPRXT, 5094-AEN2SFPR‚ 5094-AEN2SFPRXT

User Manual Original Instructions

2Rockwell Automation Publication 5094-UM005C-EN-P - October 2020

FLEX 5000 EtherNet/IP Adapter User Manual

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize

themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to

be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be

impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use

or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for

actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software

described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is

prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Labels may also be on or inside the equipment to provide specific precautions.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment,

which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to potential

Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL Regulatory

requirements for safe work practices and for Personal Protective Equipment (PPE).

Rockwell Automation Publication 5094-UM005C-EN-P - October 2020 3

Table of Contents

Preface

About This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Download Firmware, AOP, EDS, and Other Files . . . . . . . . . . . . . . . . . . . . 5

Summary of Changes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Chapter 1

FLEX 5000 Module Operation in a

Logix 5000 Control System

Controller and Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Controller Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Firmware and Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Secure Access to the System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

FLEX 5000 Adapter Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

FLEX 5000 Adapter EtherNet/IP Features. . . . . . . . . . . . . . . . . . . . . . 11

Chapter 2

FLEX 5000 Adapter Power

Requirements

Power I/O Modules and Field-side Devices . . . . . . . . . . . . . . . . . . . . . 13

Power Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

MOD Power Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Chapter 3

FLEX 5000 Adapters with SFP

Support

SFP Module Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

SFP Module Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Install a SFP module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Chapter 4

Connect to the EtherNet/IP

Network

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Set the IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Set the IP Address with the Rotary Switches . . . . . . . . . . . . . . . . . . . . . . . 18

Select the Network Redundancy Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Performance Impact of PRP Network Redundancy Mode. . . . . . . . 19

Other Methods to Set the IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Chapter 5

Configure the Adapter Add the Adapter to a Project. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Use your Adapter to Substitute an Other Adapter . . . . . . . . . . . . . . . . . . 29

Protected Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Enter and Exit Implicit Protected Mode. . . . . . . . . . . . . . . . . . . . . . . . 30

Enter and Exit Explicit Protected Mode . . . . . . . . . . . . . . . . . . . . . . . . 30

Restrictions Imposed By Implicit Protected Mode . . . . . . . . . . . . . . 31

Restrictions Imposed By Explicit Protected Mode. . . . . . . . . . . . . . . 31

Perform Tasks When Restricted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Enable or Disable HTTP Server and SNMP Server . . . . . . . . . . . . . . . . . . 33

Enable the HTTP Server in Studio 5000 Software . . . . . . . . . . . . . . . 33

Enable the SNMP Server in Studio 5000 Software . . . . . . . . . . . . . . 34

4Rockwell Automation Publication 5094-UM005C-EN-P - October 2020

Table of Contents

Chapter 6

FLEX 5000 Adapter Status

Indicators

FLEX 5000 EtherNet/IP Adapter Status Indicators . . . . . . . . . . . . . . . . . 37

Appendix A

FLEX 5000 Adapter Diagnostics Diagnostics with the Logix Designer Application. . . . . . . . . . . . . . . . . . . 39

Connection Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Module Info Category. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Alarms Category. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Port Configuration Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Network Category . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Time Sync Category. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Diagnostics with RSLinx Classic Software . . . . . . . . . . . . . . . . . . . . . . . . . 51

General Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Port Diagnostics Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Connection Manager Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

EtherNet/IP Adapter Diagnostic Web Pages . . . . . . . . . . . . . . . . . . . . . . . 54

Access Web Browser Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Diagnostic Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Ethernet Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Ring Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

PRP Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

PRP Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Reset the FLEX 5000 Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Appendix B

Module Tags FLEX 5000 Adapter Tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Appendix C

Adapter Diagnostic Assembly Create User-defined Diagnostic Assembly Types . . . . . . . . . . . . . . . . . . . 65

Create Message Type User Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Appendix D

Troubleshoot the Adapter SFP Module Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Other Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Rockwell Automation Publication 5094-UM005C-EN-P - October 2020 5

Preface

About This Publication This manual describes how to use FLEX 5000™ EtherNet/IP™ adapters in Logix

5000™ control systems. Use this manual in conjunction with the EtherNet/IP

Network Devices User Manual, publication ENET-UM006.

Make sure that you are familiar with the following:

• Use of a controller in a Logix 5000 control system

• Use of an EtherNet/IP network

• Use of various software applications from Rockwell Automation

Download Firmware, AOP,

EDS, and Other Files

Download firmware, associated files (such as AOP, EDS, and DTM), and access

product release notes from the Product Compatibility and Download Center at

rok.auto/pcdc.

Summary of Changes This publication contains the following new or updated information. This list

includes substantive updates only and is not intended to reflect all changes.

Additional Resources These documents contain additional information concerning related products

from Rockwell Automation.

Topic Page

Updated Controller and Software Compatibility with High Availability information 8

Updated list of modules in Firmware and Software Compatibility list 9

Updated list of FLEX 5000 Adapter Features 11

Added instructions to add the adapter to a project 21

Updated Connection Category information 39

Added Adapter Diagnostic Assembly chapter 65

Added DLR/PRP switch troubleshooting 69

Resource Description

EtherNet/IP Parallel Redundancy Protocol Application Technique, publication

ENET-AT006 Provides information on Parallel Redundancy Protocol (PRP) features and how to configure a

PRP network.

FLEX 5000 Modules Specifications Technical Data, publication 5094-TD001 Provides FLEX 5000 modules and EtherNet/IP adapters specifications.

FLEX 5000 EtherNet/IP Adapters with RJ45 Ports Installation Instructions,

publication 5094-IN001 Describes how to install a FLEX 5000 EtherNet/IP adapter with RJ45 ports.

FLEX 5000 EtherNet/IP Adapters with SFP Support Installation Instructions,

publication 5094-IN002 Describes how to install a FLEX 5000 EtherNet/IP adapter with SFP Support.

EtherNet/IP Media Planning and Installation Manual

Describes how to use the required media components and how to plan for, install, verify,

troubleshoot, and certify your EtherNet/IP network.

This manual is available from the Open DeviceNet® Vendor Association (ODVA) at: http://

www.odva.org.

EtherNet/IP Network Devices User Manual, ENET-UM006 Describes how to configure and use EtherNet/IP devices to communicate on the EtherNet/IP

network.

Ethernet Reference Manual, ENET-RM002 Describes basic Ethernet concepts, infrastructure components, and infrastructure features.

System Security Design Guidelines Reference Manual, SECURE-RM001 Provides guidance on how to conduct security assessments, implement Rockwell

Automation products in a secure system, harden the control system, manage user access,

and dispose of equipment.

Industrial Components Preventive Maintenance, Enclosures, and Contact

Ratings Specifications, publication IC-TD002 Provides a quick reference tool for Allen-Bradley industrial automation controls and

assemblies.

6Rockwell Automation Publication 5094-UM005C-EN-P - October 2020

Preface

You can view or download publications at rok.auto/literature.

Safety Guidelines for the Application, Installation, and Maintenance of

Solid-state Control, publication SGI-1.1

Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides

general guidelines for the application, installation, and maintenance of solid-state control in

the form of individual devices or packaged assemblies incorporating solid-state

components.

Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.

Product Certifications website, rok.auto/certifications. Provides declarations of conformity, certificates, and other certification details.

Resource Description

Rockwell Automation Publication 5094-UM005C-EN-P - October 2020 7

Chapter 1

FLEX 5000 Module Operation in a Logix 5000

Control System

Logix 5000 controllers use FLEX 5000 standard and safety I/O modules to

control devices in a control system. The controllers access the modules over an

EtherNet/IP™ network. FLEX 5000 I/O modules use terminal base (TB)

assemblies to connect field-side wiring.

FLEX 5000 I/O modules use the Producer/Consumer network communication

model. This communication is an intelligent data exchange between modules

and other system devices in which each module produces data without first

being polled.

You use FLEX 5000 I/O modules as remote I/O modules that are accessible via

an EtherNet/IP network. The modules are installed to the right of a FLEX 5000

EtherNet/IP adapter.

Logix 5000 controllers can exchange data with the modules over the network.

Figure 1 shows a standard controller with a FLEX 5000 adapter and standard I/

O modules. Standard controllers do not support safety I/O modules.

Topic Page

Controller and Software Compatibility 8

Secure Access to the System 10

FLEX 5000 Adapter Features 10

IMPORTANT You cannot use FLEX 5000 I/O modules with all Logix 5000 controllers.

For example, you can use FLEX 5000 I/O modules with CompactLogix™

5380 and ControlLogix® 5580 controllers but not with CompactLogix

5370 and ControlLogix 5570 controllers.

You can use FLEX 5000 I/O modules with Logix 5000 controllers as

remote I/O modules only.

Throughout this publication, the term Logix 5000 controller refers to

the controllers with which you can use FLEX 5000 I/O modules in a

given capacity. The term does not refer to all Logix 5000 controllers.

For the most current information on the Logix 5000 controllers with

which you can use FLEX 5000 I/O modules, see the product description

at rok.auto/flex5000IO.

8Rockwell Automation Publication 5094-UM005C-EN-P - October 2020

Chapter 1 FLEX 5000 Module Operation in a Logix 5000 Control System

Figure 1 - FLEX 5000 Standard I/O Modules in a Logix 5000 Control System

Figure 2 shows a safety controller with a FLEX 5000 adapter, and both

standard and safety I/O modules. Safety controllers support both standard and

safety I/O modules.

Figure 2 - FLEX 5000 Safety I/O Modules in a Logix 5000 Control System

Controller and Software

Compatibility

Controller and programming software compatibility requirements apply when

you use FLEX 5000 standard and safety I/O modules. A module type and how it

is used affect which requirements apply.

You must also consider Logix Designer application version requirements when

you design your system. For example, you can use FLEX 5000 safety I/O

modules with only version 32 or greater of the Logix Designer application.

Similarly, you can use a PlantPAx® system or High Availability with only

version 33 or greater of the Logix Designer application.

STATUS

NET

LINK 1

LINK 2

5094-AENTR

EtherNet/IP

™

Adapter

FLEX 5000

I/O

PRP

DLR

POWER

X100

X10

IP ADDRESS

STATUS

POWER

DIGITAL 16 INPUT 24 VDC

5094-IB16

11TB3

FLEX 5000

I/O

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

STATUS

POWER

DIGITAL 16 OUTPUT 24 VDC

5094-OB16

12TB3

FLEX 5000

I/O

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

STATUS

POWER

RELAY 8 OUTPUT ISOLATED

5094-OW8I

22TB3W

FLEX 5000TM I/O

0 1 2 3 4 5 6 7

5069-L340ERM EtherNet/IP Network 5094 Standard I/O5094-AENTR

STATUS

NET

LINK 1

LINK 2

5094-AENTR

EtherNet/IP

™

Adapter

FLEX 5000

I/O

PRP

DLR

POWER

X100

X10

IP ADDRESS

SIL2 CPU

5069-L3100ERMS2

Compact GuardLogix

SA Power MOD Power

STATUS

POWER

RELAY 8 OUTPUT ISOLATED

5094-OW8I

22TB3W

FLEX 5000TM I/O

0 1 2 3 4 5 6 7

STATUS

POWER

SAFETY DIGITAL 16 INPUT 24 VDC

5094-IB16S

55TB3I

FLEX 5000

I/O

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

STATUS

POWER

5094-OB16S

51TB3I

FLEX 5000TM I/O

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

SAFETY DIGITAL 16 OUTPUT 24 VDC

5069-L5380 EtherNet/IP Network 5094 Safety I/O5094-AENTR 5094 Standard I/O

Rockwell Automation Publication 5094-UM005C-EN-P - October 2020 9

Chapter 1 FLEX 5000 Module Operation in a Logix 5000 Control System

Controller Compatibility

Compatibility between Logix 5000 controllers and FLEX 5000 I/O modules

varies based on module type, that is, whether the module is standard or safety.

While you must pair safety I/O with a safety controller, you can also pair

standard I/O with a safety controller. For example, ControlLogix 5580

controllers are compatible with FLEX 5000 standard I/O modules.

GuardLogix® 5580 controllers are compatible with FLEX 5000 standard and

safety I/O modules.

Firmware and Software Compatibility

Table 1 describes the module compatibility requirements when you use

FLEX 5000 I/O standard and safety modules with Logix 5000 controllers.

IMPORTANT ControlLogix 5580 High Availability controllers using Logix Designer

version 33.00.00 require firmware revision 5.011 or later for the

FLEX 5000 adapter.

IMPORTANT You must use adapter firmware revision 3.011 or later with safety I/O

modules and firmware revision 2.011 or later of standard I/O modules.

Table 1 - Module Compatibility

Modules Controllers Logix Designer

Application Version

System Cat. Nos.

Standard Modules

5094-IA16, 5094-IA16XT,

5094-IB16, 5094-IB16XT,

5094-IB32, 5094-IB32XT,

5094-OB16, 5094-OB16XT,

5094-OB32, 5094-OB32XT,

5094-OW8I, 5094-OW8IXT,

5094-IF8, 5094-IF8XT,

5094-IM8, 5094-IM8XT

5094-IY8, 5094-IY8XT,

5094-OF8, 5094-OF8XT,

5094-HSC, 5094-HSCXT

CompactLogix 5380

5069-L320ER, 5069-L340ERM 31.00.00 or later

5069-L306ER, 5069-L306ERM, 5069-L310ER, 5069-L310ERM, 5069-L310ER-NSE,

5069-L310ERS2, 5069-L320ERM, 5069-L330ER, 5069-L330ERM, 5069-L340ER 31.00.00 or later

5069-L350ERM, 5069-L380ERM, 5069-L3100ERM 31.00.00 or later

Compact GuardLogix 5380

5069-L306ERMS2, 5069-L306ERS2, 5069-L310ERS2, 5069-L310ERMS2,

5069-L320ERS2, 5069-L320ERMS2, 5069-L330ERS2, 5069-L330ERMS2,

5069-L340ERS2, 5069-L340ERMS2, 5069-L350ERS2, 5069-L350ERMS2,

5069-L380ERS2, 5069-L380ERMS2, 5069-L3100ERS2, 5069-L3100ERMS2

31.00.00 or later

ControlLogix 5580 1756-L83E, 1756-L85E 31.00.00 or later

1756-L81E, 1756-L82E, 1756-L84E 31.00.00 or later

ControlLogix 5580 High

Availability Controller

1756-L81E, 1756-L81E-NSE, 1756-L81EP, 1756-L82E, 1756-L82E-NSE,

1756-L83E, 1756-L83E-NSE, 1756-L83EP, 1756-L84E, 1756-L84E-NSE,

1756-L85E, 1756-L85E-NSE, 1756-L85EP 33.00.00 or later

GuardLogix 5580 1756-L81ES, 1756-L82ES, 1756-L83ES, 1756-L84ES 31.00.00 or later

Safety Modules

5094-IB16S, 5094-IB16SXT,

5094-OB16S, 5094-OB16SXT,

5094-OW4IS, 5094-OW4ISXT

Compact GuardLogix 5380

5069-L306ERMS2, 5069-L306ERS2, 5069-L310ERS2, 5069-L310ERMS2,

5069-L320ERS2, 5069-L320ERMS2, 5069-L330ERS2, 5069-L330ERMS2,

5069-L340ERS2, 5069-L340ERMS2, 5069-L350ERS2, 5069-L350ERMS2,

5069-L380ERS2, 5069-L380ERMS2, 5069-L3100ERS2, 5069-L3100ERMS2

32.00.00 or later

GuardLogix 5580 1756-L81ES, 1756-L82ES, 1756-L83ES, 1756-L84ES 32.00.00 or later

10 Rockwell Automation Publication 5094-UM005C-EN-P - October 2020

Chapter 1 FLEX 5000 Module Operation in a Logix 5000 Control System

Secure Access to the

System

To secure access to the [device] by authorized users only, consider these

options:

• Password helps protect the source and execution of the control program

• Remove the key from the controller

• Deploy EtherNet/IP devices in accordance with recommended

architectures and concepts. See the Converged Plantwide Ethernet

(CPwE) Design and Implementation Guide, publication ENET-TD001.

• Implement physical barriers, such as locked cabinets

To secure access to the system, consider these options:

• Follow industry best practices to harden your personal computers and

servers, including anti-virus/anti-malware and application whitelisting

solutions.

• The recommendations are published at the Rockwell Automation

technical support center in Knowledgebase article Rockwell Automation

Customer Hardening Guidelines, #546987. The technical support center is

available at: https://rockwellautomation.custhelp.com/.

• Develop and deploy backup and disaster recovery policies and

procedures. Test backups on a regular schedule.

• Minimize network exposure for all control system devices and systems,

and confirm that they are not accessible from the Internet.

• Locate control system networks and devices behind firewalls and isolate

them from the business network.

• Subscribe to the Rockwell Automation Security Advisory Index,

Knowledgebase article KB54102, so you have access to information about

security matters that affect Rockwell Automation products.

FLEX 5000 Adapter

Features

A FLEX 5000 adapter performs the following functions:

• Facilitates high-speed data transfer between some Logix 5000 controllers

and remote I/O modules.

• Provides system-side power to FLEX 5000 I/O modules.

• Connects to multiple EtherNet/IP network topologies.

• Supports the Removal and Insertion Under Power (RIUP) of I/O

modules, and live bank changes.

HART Modules

5094-IF8IH, 5094-IF8IHXT,

5094-OF8IH, 5094-OF8IHXT, CompactLogix 5380

5069-L320ER, 5069-L340ERM 32.02 or later

5069-L306ER, 5069-L306ERM, 5069-L310ER, 5069-L310ERM, 5069-L310ER-NSE,

5069-L310ERS2, 5069-L320ERM, 5069-L330ER, 5069-L330ERM, 5069-L340ER 32.02 or later

5069-L350ERM, 5069-L380ERM, 5069-L3100ERM 32.02 or later

Compact GuardLogix 5380

5069-L306ERMS2, 5069-L306ERS2, 5069-L310ERS2, 5069-L310ERMS2,

5069-L320ERS2, 5069-L320ERMS2, 5069-L330ERS2, 5069-L330ERMS2,

5069-L340ERS2, 5069-L340ERMS2, 5069-L350ERS2, 5069-L350ERMS2,

5069-L380ERS2, 5069-L380ERMS2, 5069-L3100ERS2, 5069-L3100ERMS2

32.02 or later

ControlLogix 5580 1756-L83E, 1756-L85E 32.02 or later

1756-L81E, 1756-L82E, 1756-L84E 32.02 or later

ControlLogix 5580 High

Availability Controller

1756-L81E, 1756-L81E-NSE, 1756-L81EP, 1756-L82E, 1756-L82E-NSE,

1756-L83E, 1756-L83E-NSE, 1756-L83EP, 1756-L84E, 1756-L84E-NSE,

1756-L85E, 1756-L85E-NSE, 1756-L85EP 33.00.00 or later

GuardLogix 5580 1756-L81ES, 1756-L82ES, 1756-L83ES, 1756-L84ES 32.02 or later

Table 1 - Module Compatibility (Continued)

Modules Controllers Logix Designer

Application Version

System Cat. Nos.

Andere Handbücher für Allen-Bradley FLEX 5000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Steuereinheit Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley FLEX 5000 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley DM2 Benutzerhandbuch

Rockwell Automation

Rockwell Automation Trusted TMR 120 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1606-XLSBATASSY3 Bedienungsanleitung

Rockwell Automation

Rockwell Automation 2711P-RPA Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 750 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1784-KT2/B Installations- und Benutzerhandbuch

Rockwell Automation

Rockwell Automation Allen-Bradley 1769-SM2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley FactoryTalk Analytics LogixAI Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1606-XLERED20Y Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley ControlLogix DeviceNet... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 193-EGJ Series Benutzerhandbuch

Rockwell Automation

Rockwell Automation Reliance Electric LiquiFlo 41L4060 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley ControlLogix 1756-MVI Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted TMR Expander Interface Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 794-IRT8 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1756-EWEB Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SynchLink 1751-SLBA Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley SLC 500 Bedienungsanleitung

Rockwell Automation

Rockwell Automation ControlLogix 1756-M02AE Gebrauchsanweisung

Rockwell Automation

Rockwell Automation 1768-L43 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 800G-XLS Z-EX Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1734-IR2 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Trusted CS300 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung