Rockwell Automation Allen-Bradley PowerFlex 755TS Series Service-Handbuch

Hardware Service Original Instructions

PowerFlex 755TS Products

with TotalFORCE Control

Catalog Numbers 20G2, 20GE

2Rockwell Automation Publication 750-TG101A-EN-P - June 2022

PowerFlex 755TS Products with TotalFORCE Control Hardware Service Manual

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize

themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to

be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be

impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use

or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for

actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software

described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is

prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

These labels may also be on or inside the equipment to provide specific precautions.

The following icon may appear in the text of this document.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which

may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to potential

Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL Regulatory

requirements for safe work practices and for Personal Protective Equipment (PPE).

Identifies information that is useful and can help to make a process easier to do or easier to understand.

Rockwell Automation Publication 750-TG101A-EN-P - June 2022 3

Table of Contents Preface

About This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Download Firmware, Add-on Profile, EDS, and Other Files. . . . . . . . . . . 9

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Chapter 1

Before You Begin Tests,

Maintenance, or Repairs

Product Advisories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Remove Power from the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Renewal Kits for PowerFlex 755TS Products with Corrosive Gas

Protection (XT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Protective Packaging for Renewal Kits with XT . . . . . . . . . . . . . . . . . 16

Protective Covers on Kits with XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Dielectric Grease Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Protective Cover Removal from Circuit Boards with

Dielectric Grease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Inspect and Clean Circuit Board Connectors . . . . . . . . . . . . . . . . . . . 18

Apply Dielectric Grease to an Edge Connector . . . . . . . . . . . . . . . . . . 18

Commonly Used Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Software Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Hardware Installation Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Fastener Torque Sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Chapter 2

Preventative and Predictive

Maintenance

Recommended Preventative Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . 25

Predictive Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Maintenance of Industrial Control Equipment. . . . . . . . . . . . . . . . . . . . . 27

Solid-state Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Chapter 3

Component Inspection and Tests Component Inspection and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 31

Forward and Reverse Biased IGBT/Diode Tests . . . . . . . . . . . . . . . . . . . . 32

Chapter 4

Frames 1…5 Renewal Kits

Installation

Frames 1…5 Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Remove the Power Terminal Cover, Frames 1…5. . . . . . . . . . . . . . . . . . . . 35

Remove the Power Terminal Cover, Frames 1…5 . . . . . . . . . . . . . . . . 35

Install the Power Terminal Cover, Frames 1…5 . . . . . . . . . . . . . . . . . . 36

Remove the IP54, NEMA/UL Type 12 Cover, Frames 2…5 . . . . . . . . . . . . 37

Remove the IP54, NEMA/UL Type 12 Cover, Frames 2…5 . . . . . . . . . 37

Install the IP54, NEMA/UL Type 12 Cover, Frames 2…5 . . . . . . . . . . 38

Power Terminal Cover Replacement, Frames 1…5. . . . . . . . . . . . . . . . . . . 39

Remove the Power Terminal Cover, Frames 1…5 . . . . . . . . . . . . . . . . 39

Install the Power Terminal Cover, Frames 1…5 . . . . . . . . . . . . . . . . . . 39

IP54, NEMA/UL Type 12 Cover Replacement, Frames 2…5 . . . . . . . . . . . 40

Remove the IP54, NEMA/UL Type 12 Cover, Frames 2…5 . . . . . . . . . 40

Install the IP54, NEMA/UL Type 12 Cover, Frames 2…5 . . . . . . . . . . 41

4Rockwell Automation Publication 750-TG101A-EN-P - June 2022

Chassis Replacement, Frame 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Remove the Chassis, Frame 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Install the Chassis, Frame 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Chassis Replacement, Frames 2…5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Remove the Chassis, Frames 2…5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Install the Chassis, Frames 2…5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Flange Gasket Replacement, Frames 2…5 . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Remove the Flange Gasket, Frames 2…5 . . . . . . . . . . . . . . . . . . . . . . . . 49

Install the Flange Gasket, Frames 2…5 . . . . . . . . . . . . . . . . . . . . . . . . . 52

Control Pod Printed Circuit Board Fan Replacement, Frames 2…5 . . . 54

Remove the Control Pod Printed Circuit Board Fan, Frames 2…5 . 54

Install the Control Pod Printed Circuit Board Fan, Frames 2…5. . . 56

Heatsink Fan Replacement, Frames 1…3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Remove the Heatsink Fan, Frames 1…3. . . . . . . . . . . . . . . . . . . . . . . . . 57

Install the Heatsink Fan, Frames 1…3 . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Heatsink Fan Replacement, Frames 4 and 5. . . . . . . . . . . . . . . . . . . . . . . . 58

Remove the Heatsink Fan, Frames 4 and 5 . . . . . . . . . . . . . . . . . . . . . 58

Install the Heatsink Fan, Frames 4 and 5 . . . . . . . . . . . . . . . . . . . . . . . 58

Stirring Fan Replacement, Frames 4 and 5. . . . . . . . . . . . . . . . . . . . . . . . . 59

Remove the Stirring Fan, Frames 4 and 5. . . . . . . . . . . . . . . . . . . . . . . 59

Install the Stirring Fan, Frames 4 and 5 . . . . . . . . . . . . . . . . . . . . . . . . 60

Control Pod HIM Cradle Replacement, Frames 2…5 . . . . . . . . . . . . . . . . 61

Remove the Control Pod HIM Cradle, Frames 2…5 . . . . . . . . . . . . . . 61

Install the Control Pod HIM Cradle, Frames 2…5. . . . . . . . . . . . . . . . 63

Main Control Circuit Board Replacement, Frame 1 . . . . . . . . . . . . . . . . . 64

Remove the Main Control Circuit Board, Frame 1 . . . . . . . . . . . . . . . 64

Install the Main Control Circuit Board, Frame 1 . . . . . . . . . . . . . . . . 67

Main Control Circuit Board Replacement, Frames 2…5 . . . . . . . . . . . . . 69

Remove the Main Control Circuit Board, Frames 2…5 . . . . . . . . . . . 69

Install the Main Control Circuit Board, Frames 2…5 . . . . . . . . . . . . . 72

Main Control Board to Power Interface Board Ribbon Cable

Replacement, Frame 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Remove the Main Control Board to Power Interface Board

Ribbon Cable, Frame 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Install the Main Control Board to Power Interface Board

Ribbon Cable, Frame 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Main Control Board to Power Interface Board Ribbon Cable

Replacement, Frames 2…5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Remove the Main Control Board to Power Interface Board

Ribbon Cable, Frames 2…5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Install the Main Control Board to Power Interface Board

Ribbon Cable, Frames 2…5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Backplane Circuit Board Replacement, Frame 1 . . . . . . . . . . . . . . . . . . . . 76

Remove the Backplane Circuit Board, Frame 1 . . . . . . . . . . . . . . . . . . 76

Install the Backplane Circuit Board, Frame 1 . . . . . . . . . . . . . . . . . . . 77

Backplane Circuit Board Replacement, Frames 2…5 . . . . . . . . . . . . . . . . 77

Remove the Backplane Circuit Board, Frames 2…5 . . . . . . . . . . . . . . 77

Install the Backplane Circuit Board, Frames 2…5. . . . . . . . . . . . . . . . 79

Rockwell Automation Publication 750-TG101A-EN-P - June 2022 5

Chapter 5

Frame 6 Renewal Kits

Installation

Frame 6 Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Remove the Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Remove the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Install the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Remove the Protective Guard (IP54, NEMA/UL Type 12 Enclosure) . . . 84

Remove the Protective Guard (IP54, NEMA/UL Type 12

Enclosure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Install the Protective Guard (IP54, NEMA/UL Type 12

Enclosure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Control Pod Access Cover Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Remove the Control Pod Access Cover . . . . . . . . . . . . . . . . . . . . . . . . . 85

Install the Control Pod Access Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Cover Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Remove the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Install the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Control Pod HIM Cradle Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Remove the Control Pod HIM Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Install the Control Pod HIM Cradle. . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Main Control Circuit Board Replacement . . . . . . . . . . . . . . . . . . . . . . . . . 89

Remove the Main Control Circuit Board . . . . . . . . . . . . . . . . . . . . . . . 89

Install the Main Control Circuit Board. . . . . . . . . . . . . . . . . . . . . . . . . 92

Main Control Board to Power Interface Board Ribbon Cable

Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Remove the Main Control Board to Power Interface Board

Ribbon Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Install the Main Control Board to Power Interface Board

Ribbon Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Backplane Circuit Board Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Remove the Backplane Circuit Board . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Install the Backplane Circuit Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Heatsink Fan Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Remove the Heatsink Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Install the Heatsink Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Upper Stirring Fan Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Remove the Upper Stirring Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Install the Upper Stirring Fan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Lower Stirring Fan Assembly Replacement . . . . . . . . . . . . . . . . . . . . . . . 100

Remove the Lower Stirring Fan Assembly . . . . . . . . . . . . . . . . . . . . . 100

Install the Lower Stirring Fan Assembly. . . . . . . . . . . . . . . . . . . . . . . 101

Flange Gasket Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Remove the Flange Gasket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Install the Flange Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Power Interface Circuit Board Replacement . . . . . . . . . . . . . . . . . . . . . . 106

Remove the Power Interface Circuit Board . . . . . . . . . . . . . . . . . . . . 106

Install the Power Interface Circuit Board . . . . . . . . . . . . . . . . . . . . . 112

AC Precharge Circuit Board (400/480V) Replacement. . . . . . . . . . . . . . 113

Remove the AC Precharge Circuit Board (400/480V) . . . . . . . . . . . 113

Install the AC Precharge Circuit Board (400/480V) . . . . . . . . . . . . . 118

6Rockwell Automation Publication 750-TG101A-EN-P - June 2022

DC Precharge Circuit Board Replacement . . . . . . . . . . . . . . . . . . . . . . . . 119

Remove the DC Precharge Circuit Board . . . . . . . . . . . . . . . . . . . . . . 119

Install the DC Precharge Circuit Board . . . . . . . . . . . . . . . . . . . . . . . 125

Chapter 6

Frame 7 Renewal Kits

Installation

Frame 7 Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Remove the Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Remove the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Install the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Remove the Protective Guard (IP54, NEMA/UL Type 12 Enclosure) . . 129

Remove the Protective Guard (IP54, NEMA/UL Type 12

Enclosure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Install the Protective Guard (IP54, NEMA/UL Type 12

Enclosure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Control Pod Access Cover Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Remove the Control Pod Access Cover . . . . . . . . . . . . . . . . . . . . . . . . 130

Install the Control Pod Access Cover. . . . . . . . . . . . . . . . . . . . . . . . . . 130

Cover Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Remove the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Install the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Control Pod HIM Cradle Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Remove the Control Pod HIM Cradle . . . . . . . . . . . . . . . . . . . . . . . . . 131

Install the Control Pod HIM Cradle. . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Main Control Circuit Board Replacement . . . . . . . . . . . . . . . . . . . . . . . . 134

Remove the Main Control Circuit Board . . . . . . . . . . . . . . . . . . . . . . 134

Install the Main Control Circuit Board. . . . . . . . . . . . . . . . . . . . . . . . 137

Main Control Board to Power Interface Board Ribbon Cable

Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Remove the Main Control Board to Power Interface Board

Ribbon Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Install the Main Control Board to Power Interface Board

Ribbon Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Backplane Circuit Board Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Remove the Backplane Circuit Board . . . . . . . . . . . . . . . . . . . . . . . . . 141

Install the Backplane Circuit Board. . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Heatsink Fan Assembly Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Remove the Heatsink Fan Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Install the Heatsink Fan Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Stirring Fan Assembly Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Remove the Stirring Fan Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Install the Stirring Fan Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Flange Gasket Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Remove the Flange Gasket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Install the Flange Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Power Interface Circuit Board Replacement . . . . . . . . . . . . . . . . . . . . . . 151

Remove the Power Interface Circuit Board . . . . . . . . . . . . . . . . . . . . 151

Install the Power Interface Circuit Board . . . . . . . . . . . . . . . . . . . . . 160

Rockwell Automation Publication 750-TG101A-EN-P - June 2022 7

AC Precharge Circuit Board (400/480V) Replacement. . . . . . . . . . . . . . 161

Remove the AC Precharge Circuit Board (400/480V) . . . . . . . . . . . 161

Install the AC Precharge Circuit Board (400/480V) . . . . . . . . . . . . . 169

DC Precharge Circuit Board Replacement . . . . . . . . . . . . . . . . . . . . . . . . 170

Remove the DC Precharge Circuit Board . . . . . . . . . . . . . . . . . . . . . . 170

Install the DC Precharge Circuit Board . . . . . . . . . . . . . . . . . . . . . . . 178

Appendix A

Start Up After Repairs Before You Apply Power to the Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

No-load DC Bus Voltage and Output Current Measurements. . . . . . . 180

Appendix B

Schematics List of Drive Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

8Rockwell Automation Publication 750-TG101A-EN-P - June 2022

Notes:

Rockwell Automation Publication 750-TG101A-EN-P - June 2022 9

Preface

About This Publication This manual provides recommended preventative and predictive maintenance

information, component inspection guidance and primary component tests,

renewal parts replacement procedures, and schematic diagrams for

PowerFlex® 755TS products.

This manual is intended for qualified service personnel responsible for

PowerFlex 755TS products repairs. You must have previous experience with,

and an understanding of, electrical terminology, procedures, required

equipment, equipment protection procedures and methods, and safety

precautions. See safety-related practices that are contained in the publication

NFPA 70E, Standard for Electrical Safety in the Work Place.

For product programming and troubleshooting information that can help you

determine if your product requires repairs, see these publications:

• See the PowerFlex Drives with TotalFORCE® Control Programming

Manual (firmware revision 10.xxx and later), publication 750-PM101, for

general programming information.

• See the PowerFlex Drives with TotalFORCE Control Parameters

Reference Data, publication 750-RD101, for parameter enumerations and

descriptions.

• See the PowerFlex Drives with TotalFORCE Control Conditions

Reference Data, publication 750-RD102, for drive fault and alarm

information.

Download Firmware, Add-on

Profile, EDS, and Other Files

Download firmware, associated files (such as Add-on Profile, EDS, and DTM),

and access product release notes from the Product Compatibility and

Download Center at rok.auto/pcdc.

10 Rockwell Automation Publication 750-TG101A-EN-P - June 2022

Preface

Additional Resources These documents contain additional information concerning related products

from Rockwell Automation.

You can view or download publications at rok.auto/literature.

Resource Description

PowerFlex 755TS Products with TotalFORCE Control Installation Instructions,

publication 750-IN119 Provides the basic steps to install PowerFlex 755TS drives.

PowerFlex 750-Series I/O, Feedback, and Power Option Modules Installation,

publication 750-IN111 Provides instructions to install and wire 750-Series option modules.

PowerFlex 755TS Torque Accuracy Module (TAM) Installation Instructions,

publication 750-IN120 Provides instructions to install and wire the PowerFlex 755TS torque accuracy module (TAM).

PowerFlex TotalFORCE Firmware Documentation Set:

• PowerFlex Drives with TotalFORCE Control Programming Manual,

publication 750-PM101

• PowerFlex Drives with TotalFORCE Control Parameters Reference Data,

publication 750-RD101

• PowerFlex Drives with TotalFORCE Control Conditions Reference Data,

publication 750-RD102

Provides detailed information on:

• Startup, control algorithms, and status indicators

• Parameters and programming

• Faults, alarms, events, and troubleshooting

PowerFlex 755TS Products with TotalFORCE Control Technical Data,

publication 750-TD104

Provides detailed information on:

• Drive and bus supply specifications

• Option specifications

• Fuse and circuit breaker ratings

Wiring and Grounding Guidelines for Pulse Width Modulated (PWM) AC Drives,

publication DRIVES-IN001 Provides basic information to properly wire and ground PWM AC drives.

EtherNet/IP™ Network Devices User Manual, publication ENET-UM006 Describes how to configure and use EtherNet/IP™ devices to communicate on the EtherNet/IP

network.

Ethernet Reference Manual, publication ENET-RM002 Describes basic Ethernet concepts, infrastructure components, and infrastructure features.

System Security Design Guidelines Reference Manual, publication SECURE-RM001

Provides guidance on how to conduct security assessments, implement Rockwell Automation

products in a secure system, harden the control system, manage user access, and dispose of

equipment.

UL Standards Listing for Industrial Control Products, publication CMPNTS-SR002 Assists original equipment manufacturers (OEMs) with construction of panels, to help ensure that

they conform to the requirements of Underwriters Laboratories.

American Standards, Configurations, and Ratings: Introduction to

Motor Circuit Design, publication IC-AT001

Provides an overview of American motor circuit design based on methods that are outlined in the

NEC.

Safety Guidelines for the Application, Installation, and Maintenance of Solid-state

Control, publication SGI-1.1

Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides general

guidelines for the application, installation, and maintenance of solid-state control in the form of

individual devices or packaged assemblies incorporating solid-state components.

Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.

Product Certifications website, rok.auto/certifications. Provides declarations of conformity, certificates, and other certification details.

Andere Handbücher für Allen-Bradley PowerFlex 755TS Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Rockwell Automation Gleichstromantrieb Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 7000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 400P Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 35E Bedienungsanleitung

Rockwell Automation

Rockwell Automation Reliance electric SP600 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 4 FKN6 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation 6000G Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 6000 Kurzanleitung

Rockwell Automation

Rockwell Automation PowerFlex series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 4M Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 7000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 6000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1204 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 700 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 400 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 750 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Reliance electric FlexPak 3000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 160-AA02 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Reliance electric FlexPak 3000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation RELIANCE ELECTRIC SP120 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 40 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 755T Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 160 SSC Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-BradleyPowerFlex 700H Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung

Beckhoff

Beckhoff AX8911 Bedienerhandbuch

Lenze

Lenze 8200 vector Bedienungsanleitung

Danfoss

Danfoss VLT DriveMotor FCP 106 Leitfaden