Rockwell Automation Allen-Bradley PowerFlex 6000 Bedienungsanleitung

User Manual Original Instructions

PowerFlex 6000 Medium

Voltage Variable Frequency

Drive

Bulletin Number 6000G

2Rockwell Automation Publication 6000-UM002G-EN-P - August 2022

PowerFlex 6000 Medium Voltage Variable Frequency Drive User Manual

Important User Information

Read this document and the documents listed in the additional resources section about installation, configuration, and

operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize

themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.

Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to

be carried out by suitably trained personnel in accordance with applicable code of practice.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be

impaired.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use

or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for

actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software

described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is

prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

These labels may also be on or inside the equipment to provide specific precautions.

The following icon may appear in the text of this document.

WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment,

which may lead to personal injury or death, property damage, or economic loss.

ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property

damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous

voltage may be present.

BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may

reach dangerous temperatures.

ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to

potential Arc Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL

Regulatory requirements for safe work practices and for Personal Protective Equipment (PPE).

Identifies information that is useful and can help to make a process easier to do or easier to understand.

Rockwell Automation Publication 6000-UM002G-EN-P - August 2022 3

Table of Contents

Preface

About This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Who Should Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

What Is Not in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Download Firmware, AOP, EDS, and Other Files . . . . . . . . . . . . . . . . . . . . 7

Summary of Changes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

General Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Commissioning Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 1

Introduction Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Environmental Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

How it Works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Cascaded “H” Bridge (CHB) Topology. . . . . . . . . . . . . . . . . . . . . . . . . . 12

Simplified Electrical Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Standards Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Chapter 2

Drive System Layout Elevation Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Isolation Transformer Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Isolation Transformer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Isolation Transformer Temperature Monitor. . . . . . . . . . . . . . . . . . . 24

Top-mounted Cooling Fans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Incoming Line Power Cable Connections . . . . . . . . . . . . . . . . . . . . . . 25

Outgoing Motor Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Door Position Limit Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Interlocking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Voltage Sensing Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Power Module Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Power Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Hall Effect Current Sensors (HECs) . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Top-mounted Cooling Fans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

LV Control Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Control Unit (all modules) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

PLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

HMI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Synchronous Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Operator Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Basic Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

4Rockwell Automation Publication 6000-UM002G-EN-P - August 2022

Chapter 3

Setup and Operation Main Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Drive Setup and Configuration Controls . . . . . . . . . . . . . . . . . . . . . . . 41

Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Operation Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Setup and Monitor Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Main Interface Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Set Frequency (Hz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Drive Operation Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

View Version Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Alarm History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Trends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

View Voltage, Current, or Frequency Trends . . . . . . . . . . . . . . . . . . . 52

Customize a Trend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Confirm Bypass Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Choose Local/Remote Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Open/Close Drive Input and Output Contactors . . . . . . . . . . . . . . . . 58

Open/Close Bypass Contactors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

User Parameter Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Change User Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Chapter 4

Parameters and Function Codes P Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Chapter 5

Preventative Maintenance and

Component Replacement

Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Daily Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Clean the Air Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Regular Maintenance Intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Physical Checks (No Medium Voltage or Control Power) . . . . . . . . . . . . 85

Power Connection Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Physical Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Medium Voltage Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Maintenance after a Fault Condition . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Isolation Transformer Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Replace/Clean Door-mounted Air Filters . . . . . . . . . . . . . . . . . . . . . . . 87

Inspect Top Mounted Cooling Fans. . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Replace Top Mounted Cooling Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Fan Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Inspect Isolation Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Inspect Voltage Sensing Board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Replace Voltage Sensing Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Inspect Door Position Limit Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Rockwell Automation Publication 6000-UM002G-EN-P - August 2022 5

Replace Door Position Limit Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Power Module Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Inspect, Clean, or Replace Door Mounted Air Filters . . . . . . . . . . . . 98

Inspect or Replace Top Mounted Cooling Fans . . . . . . . . . . . . . . . . . 98

Inspect Power Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Replace Power Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Replace Power Module Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Inspect or Replace HECS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Inspect or Replace Door Position Limit Switch . . . . . . . . . . . . . . . . 107

LV Control Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Inspect AC/DC Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Replace AC/DC Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Inspect UPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Replace UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Inspect PLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Inspect/Replace Control Unit or Control Boards . . . . . . . . . . . . . . . 114

Inspect the HMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Replace the HMI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Replace LV Control Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Replace LV Control Circuit Breakers. . . . . . . . . . . . . . . . . . . . . . . . . . 120

Inspect Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Inspect Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Inspect Pilot Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Inspect Locking and Interlocking Devices. . . . . . . . . . . . . . . . . . . . . 122

Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Inspect LV Component Terminal and Plug-in Connections . . . . . 122

Inspect Medium Voltage Cable Connections . . . . . . . . . . . . . . . . . . 122

Inspect Power Cable and Control Wire Terminals. . . . . . . . . . . . . . 122

Inspect Transformer Secondary Windings . . . . . . . . . . . . . . . . . . . . 122

Inspect Power Module Input and Output Power Connections . . . 123

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Review Firmware and Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Inspect/Review Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Professional Maintenance Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Miscellaneous Preventive Maintenance Work . . . . . . . . . . . . . . . . . 123

Tools/Materials/Documentation Requirements. . . . . . . . . . . . . . . . 124

Final Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Prepare Final Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Appendix A

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Appendix B

Catalog Number Explanation PowerFlex 6000 Medium Voltage Variable Frequency Drives . . . . . . . 129

Appendix C

Preventative Maintenance

Schedule

PowerFlex 6000 Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . 131

6Rockwell Automation Publication 6000-UM002G-EN-P - August 2022

Appendix D

Torque Requirements Torque Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Appendix E

Spare Parts Storage Requirements and Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Power Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Signal Conditioners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Control Equipment and Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

EC Cooling Fans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Spare Parts Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Spare Parts Connection Matrix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Power Supply Connection Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

1606 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Control Equipment and Boards Connection Guidelines. . . . . . . . . . . . 140

Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Power Components Connection Guidelines . . . . . . . . . . . . . . . . . . . . . . 142

Power Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Cooling System Connection Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . 144

EC Cooling Fans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Connection Wire Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Guidelines for Extended Shutdown or Storage. . . . . . . . . . . . . . . . . . . . 146

Medium Voltage Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Storage Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Cooling Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Control Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Power Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Guidelines for Inspection After Extended Shutdown or Storage . . . . 147

Visual Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Cooling Fans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Control Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Index

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Rockwell Automation Publication 6000-UM002G-EN-P - August 2022 7

Preface

About This Publication This document provides procedural information for managing daily or

recurring tasks involving PowerFlex® 6000 medium voltage variable frequency

drives.

Rockwell Automation recognizes that some of the terms that are currently

used in our industry and in this publication are not in alignment with the

movement toward inclusive language in technology. We are proactively

collaborating with industry peers to find alternatives to such terms and

making changes to our products and content. Please excuse the use of such

terms in our content while we implement these changes.

Who Should Use This

Manual

This manual is intended for use by personnel familiar with operating medium

voltage and solid-state variable speed drive equipment. The manual contains

material that enables operation and regular maintenance of the drive system.

What Is Not in This Manual This manual provides information specific to maintaining the PowerFlex 6000

medium voltage variable frequency drive. It does not include topics such as:

• Dimensional and electrical drawings that are generated for each

customer’s order

• Spare parts lists compiled for each customer’s order

See the following documents for additional product detail or instruction

relating to PowerFlex 6000 drives:

• PowerFlex 6000 Medium Voltage Variable Frequency Drive Installation

Manual, publication 6000-IN006; instructions for installing the drive,

dimensions, requirements, and wiring information.

• PowerFlex 6000 Medium Voltage Variable Frequency Drive Shipping

and Handling Manual, publication 6000-IN008: instructions for

shipping and handling a Medium Voltage variable frequency drive and

related equipment.

• PowerFlex 6000 Medium Voltage Variable Frequency Drive Firmware,

Parameter, and Troubleshooting Manual, publication 6000-TD004.

This document provides detailed information on drive features,

parameters, and troubleshooting faults.

Rockwell Automation provides the site- and installation-specific electrical and

design information for each drive during the order process cycle. If they are

not available on site with the drive, contact Rockwell Automation.

Download Firmware, AOP,

EDS, and Other Files

Download firmware, associated files (such as AOP, EDS, and DTM), and access

product release notes from the Product Compatibility and Download Center at

rok.auto/pcdc.

8Rockwell Automation Publication 6000-UM002G-EN-P - August 2022

Preface

Summary of Changes This publication contains the following new or updated information. This list

includes substantive updates only and is not intended to reflect all changes.

General Precautions

Service and Support Commissioning Support

After installation, Rockwell Automation is responsible for commissioning

activities for the PowerFlex 6000 product line. Contact your local Rockwell

Automation sales representative to arrange commissioning.

Rockwell Automation support includes, but is not limited to:

• quoting and managing product on-site startups

• quoting and managing field modification projects

• quoting and managing customer in-house and on-site product training

The user or its representatives are responsible for pre-commissioning

activities to prepare the drive for commissioning. Failure to complete these

activities before the commissioning process will delay the startup of the drive.

Topic Page

Updated template Throughout

Added inclusive language acknowledgment 7

Updated Figure 17 - Isolation Transformer Temperature Monitors 25

Updated section HMI 38

Added section Operator Interface 39-40

Updated section Replace the eHIM 118

Added appendix Spare Parts Storage 137

ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive parts

and assemblies. Static control precautions are required when installing,

testing, servicing, or repairing this assembly. Component damage may result

if ESD control procedures are not followed. If you are not familiar with static

control procedures, reference Allen-Bradley publication 8000-4.5.2, “Guarding

Against Electrostatic Damage” or any other applicable ESD protection

handbook.

ATTENTION: An incorrectly applied or installed drive can result in component

damage or a reduction in product life. Wiring or application errors, such as,

undersizing the motor, incorrect or inadequate AC supply, or excessive

ambient temperatures may result in malfunction of the system.

ATTENTION: Only personnel familiar with the PowerFlex 6000 Adjustable

Speed Drive (ASD) and associated machinery should plan or implement the

installation, startup and subsequent maintenance of the system. Failure to

comply may result in personal injury and/or equipment damage.

ATTENTION: Only qualified personnel with the correct PPE (Personal

Protective Equipment) should service the equipment. Be sure to follow the

safety procedures and local regulations to disconnect the high voltage. After

waiting for 15 minutes, open the cabinet door and verify the absence of

medium voltage on the input, output, and power cell terminals with a high-

voltage detector that is properly rated for the line and motor voltages. All LED

lights on the power cells must be off and the drive be grounded with portable

grounding cables on the input and output before servicing. Failure to follow

the safety procedures can result in severe injury or death.

Rockwell Automation Publication 6000-UM002G-EN-P - August 2022 9

Preface

See the Pre-commissioning Checklist in the PowerFlex 6000 Medium Voltage

Variable Frequency Drive Installation Manual, publication 6000-IN006.

Additional Resources These documents contain additional information concerning related products

from Rockwell Automation.

You can view or download publications at rok.auto/literature.

Resource Description

PowerFlex 6000 Medium Voltage Variable Frequency Drive Installation

Manual, publication 6000-IN006 Provides instructions for installing the drive, dimensions, requirements, and wiring

information.

PowerFlex 6000 Medium Voltage Variable Frequency Drive Shipping and

Handling Manual, publication 6000-IN008 Provides instructions for shipping and handling a Medium Voltage variable frequency drive

and related equipment.

PowerFlex 6000 Medium Voltage Variable Frequency Drive Parameter

Manual, publication 6000-TD004 Provides detailed information on drive features, parameters, and troubleshooting faults.

EtherNet/IP Network Devices User Manual, publication ENET-UM006 Describes how to configure and use EtherNet/IP devices to communicate on the EtherNet/IP

network.

Ethernet Reference Manual, publication ENET-RM002 Describes basic Ethernet concepts, infrastructure components, and infrastructure features.

System Security Design Guidelines Reference Manual,

publication SECURE-RM001

Provides guidance on how to conduct security assessments, implement Rockwell

Automation products in a secure system, harden the control system, manage user access,

and dispose of equipment.

UL Standards Listing for Industrial Control Products,

publication CMPNTS-SR002 Assists original equipment manufacturers (OEMs) with construction of panels, to help ensure

that they conform to the requirements of Underwriters Laboratories.

American Standards, Configurations, and Ratings: Introduction to Motor

Circuit Design, publication IC-AT001 Provides an overview of American motor circuit design based on methods that are outlined

in the NEC.

Industrial Components Preventive Maintenance, Enclosures, and Contact

Ratings Specifications, publication IC-TD002 Provides a quick reference tool for Allen-Bradley industrial automation controls and

assemblies.

Safety Guidelines for the Application, Installation, and Maintenance of

Solid-state Control, publication SGI-1.1

Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides

general guidelines for the application, installation, and maintenance of solid-state control in

the form of individual devices or packaged assemblies incorporating solid-state

components.

Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1 Provides general guidelines for installing a Rockwell Automation industrial system.

Product Certifications website, rok.auto/certifications. Provides declarations of conformity, certificates, and other certification details.

10 Rockwell Automation Publication 6000-UM002G-EN-P - August 2022

Preface

Notes:

Andere Handbücher für Allen-Bradley PowerFlex 6000

Inhaltsverzeichnis

Andere Rockwell Automation Gleichstromantrieb Handbücher

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 6000 Kurzanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 520 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 160 SSC Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley DriveGuard B Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 20P Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 755TM Bedienungsanleitung

Rockwell Automation

Rockwell Automation 14C214 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Reliance Electric MD65 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 4M Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex Active Front End... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Reliance electric GV3000/SE Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 40 FRN Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Reliance electric 6SB401 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 750 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 7000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation RELIANCE ELECTRIC SP120 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley DRIVES HEADQUARTERS Flying Start PowerFlex... Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 700 B Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 20P Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 7000 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley 1204 Series Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley PowerFlex 525 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley Ultra5000 Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung

Beckhoff

Beckhoff AX8911 Bedienerhandbuch

Lenze

Lenze 8200 vector Bedienungsanleitung

Danfoss

Danfoss VLT DriveMotor FCP 106 Leitfaden