Rosewill RC-100 Bedienungsanleitung

USB 2.0 2-Port PCI Adapter RC100

User Manual

USB 2.0 2-Port PCI Adapter RC100

System Requirements

• Windows® 98SE, 2000, ME, XP(Pentium® or K6® - class processor -266 MHz or higher)

• Mac® OS 10.1 or Above

• 32MB of RAM

• Available PCI Slot

• CD-ROM Drive(for driver installation)

Speciﬁcations

• VIA VT6212L chipset

• USB 1.1 and 2.0 Compliant

• Up to 480 Mbps (Megabits-Per-Second) Data Transfer Rate

• 40 Times Faster Than The USB 1.1

• Hot Swappable Plug-n-Play

• 2 External Type A USB 2.0 Ports

• 2 Type A USB 2.0 Ports by connecting an optional 2-Port USB cable to connector USB3

Package Contents

• 1 x USB 2.0 PCI Card

• 1 x Driver CD

• 1 x User Manual

Hardware Installation

Be careful with polarity of the USB connector (USB3). Check the pin assignment while you connect the USB cable.

User Manual

USB 2.0 2-Port PCI Adapter RC100

Pin No. Deﬁnition

1 Power

2 Power

3 USB3 D-

4 USB4 D-

5 USB3 D+

6 USB4 D+

7 GND

8 GND

9 No Pin

10 NC

1. Remove your computer’s cover. (Note: If necessary, consult your computer’s manual for

help in removing the cover)

2. Locate an available PCI slot and, if necessary, remove the expansion slot bracket.

3. Insert the USB 2.0 Card gently but ﬁrmly until the card is fully seated.

4. Fasten card to the computer case using a screw.

5. Replace the computer cover.

Driver Installation

Windows®98SE Installation

Make sure your version of Windows® is 98 Second Edition by check the “Properties” of “My

Computer”.

1. Windows will detect new hardware and start the “VIA Tech 3038 PCI to USB Universal Host

User Manual

USB 2.0 2-Port PCI Adapter RC100

Controller” driver search program. Click “Next”.

2. Select “Search for the best driver for your device”. Click “Next”.

3. Don’t select any location and click “Next”.

4. Select “The updated driver (Recommended) VIA Tech 3038 PCI to USB Universal Host

Controller”. Click “Next”.

User Manual

USB 2.0 2-Port PCI Adapter RC100

5. Click “Next” again to conﬁrm the driver and begin installation. Please insert the disk labeled

“Windows 98 CD disk”.

6. After driver installation ﬁnished, click “Finish”.

7. Next, you will see Windows ﬁnd a “VIA Tech 3038 PCI to USB Universal Controller” device

again. Repeat the above process for the second “VIA Tech 3038 PCI to USB Universal

Controller”.

8. As “PCI Universal Serial Bus” driver search program shows up, as Figure 5. Click “Cancel” to

cancel the driver installation for this device. This driver will be installed from the included Driver

CD.

9. Insert the Driver CD into the CD-ROM drive of your computer. Browse to the VIA USB 2.0

Driver Folder “\PCI_IO\Viausb20” on the Driver CD, then double-click the installation ﬁle “Setup.

exe”. Follow the on-screen instructions, then reboot when prompted. This will automatically

install the driver for the “PCI Universal Serial Bus” device found in step 8.

User Manual

USB 2.0 2-Port PCI Adapter RC100

10. Once you have rebooted, your USB 2.0 Four Port PCI Card is ready to be used. If you open

the Device Manager, you will see the newly installed devices. To locate the Device Manager right

click “My Computer” and select “Properties”, then the “Device Manager” tab.

Windows® ME Installation

1. Windows will detect the USB 2.0 Four Port PCI Card and automatically install drivers for all

known USB devices. Follow the installation to restart the computer.

User Manual

USB 2.0 2-Port PCI Adapter RC100

2. After you have rebooted, Please insert the Driver CD into the CD-ROM drive of your computer.

Browse to the VIA USB 2.0 Driver Folder “\PCI_IO\Viausb20” on the Driver CD, then double-click

the installation ﬁle “Setup.exe”. Follow the on-screen instructions, then reboot when prompted.

This will automatically install the driver for the “PCI Universal Serial Bus” device found in step 1.

3. Once you have rebooted, your USB 2.0 Four Port PCI Card is ready for operation. Open Device

Manager, you will see the newly installed devices.

Windows® 2000 Installation

Windows® 2000 operating system natively supports this USB 2.0 Four PCI Card.

• No Drivers are necessary

However, please ensure you have the latest Service Pack installed.

• Windows® 2000 Service Pack 4 (or later)

User Manual

USB 2.0 2-Port PCI Adapter RC100

Windows® XP Installation

Windows® XP operating system natively supports this USB 2.0 Four Port PCI Card.

• No Drivers are necessary

However, please ensure you have the latest Service Pack installed.

• Windows® XP Service Pack 1 or later

When you start the PC, the drivers are installed automatically by the Hardware Wizard.

Thank you for purchasing Rosewill Product.

Please register your product at www.rosewill.com for complete warranty information and future

support for your product.

Inhaltsverzeichnis

Andere Rosewill PCI-Karte Handbücher

Rosewill

Rosewill RC-209-EX Bedienungsanleitung

Rosewill

Rosewill RC-400 Bedienungsanleitung

Rosewill

Rosewill RC-305E Bedienungsanleitung

Rosewill

Rosewill RNWD?N9003PCE Bedienungsanleitung

Rosewill

Rosewill RC-301 Bedienungsanleitung

Rosewill

Rosewill RC508 Bedienungsanleitung

Rosewill

Rosewill RC-401 Bedienungsanleitung

Rosewill

Rosewill RSV-S4-6G Bedienungsanleitung

Rosewill

Rosewill RC-305 Bedienungsanleitung

Rosewill

Rosewill RNX-N300X Bedienungsanleitung

Rosewill

Rosewill RC-209 Bedienungsanleitung

Rosewill

Rosewill RC501 Bedienungsanleitung

Rosewill

Rosewill RSV-S4-6G Bedienungsanleitung

Rosewill

Rosewill RC-20002 Bedienungsanleitung

Rosewill

Rosewill RC-NIC412 Bedienungsanleitung

Rosewill

Rosewill RC-304 Bedienungsanleitung

Rosewill

Rosewill RC503 Bedienungsanleitung

Rosewill

Rosewill RNX-N250PC2 Bedienungsanleitung

Rosewill

Rosewill RC-223 Bedienungsanleitung

Rosewill

Rosewill RC601 Bedienungsanleitung

Rosewill

Rosewill RC303 Bedienungsanleitung

Rosewill

Rosewill RNX-N300 Bedienungsanleitung

Rosewill

Rosewill RC214 Bedienungsanleitung

Rosewill

Rosewill RC-20003 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung