Ruijie Reyee RG-EW1200G PRO Bedienungsanleitung

Ruijie RG-EW1200G PRO Wireless Router

Quick Installation Guide

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: https://caseportal.ruijienetworks.com

Community: https://community.ruijienetworks.com

Technical Support Email: [email protected]

Skype: [email protected]

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of

data.

RG-EW1200G PRO Wireless Router Quick Installation Guide

For better use of Reyee products, please read this guide before installation

1 Packing List

Name

Quantity

Unit

Router

Set

Power Adapter

Piece

Warranty card

Copy

Quick Installation Guide

Copy

2 Product Appearance

Figure 2-1 Product Appearance

Note:

1. System status indicator

2. Pairing/Reset button

(press >10s to reset

press <1s to pair)

3. Power port

4. WAN port/Indicator

5. LAN1-3 port/Indicator

3 Quick Installation

Access the Internet in only 3 steps.

1. Insert the cable which connects to the Internet to the yellow port, and power on the router.

RG-EW1200G PRO Wireless Router Quick Installation Guide

2. Access the Internet

Connect to the SSID “@Ruijie-sxxxx” or “@Ruijie-mxxxx” (xxxx is the last 4 digits of MAC address) by mobile phone or PC.

The configuration page will be displayed automatically, or you can visit 192.168.110.1 by browser.

WLAN Browser

If you can not connect to the SSID or visit the website, please scan the QR-code on the back of package for online

support.

3. Configuration Completes

Complete all configuration according to the guide. When "Configuration succeeded" is displayed, you can access the

Internet.

SSID you have configured

Power

Internet

RG-EW1200G PRO Wireless Router Quick Installation Guide

4 Reyee Mesh Router Connection

Reyee Mesh router can connect with each other to form a distributed network.

1. Connect the main router to the Internet

Please refer to the Quick Installation for configuration.

This router is used as the main router of the distributed network, and other Reyee Mesh routers are secondary routers.

2. One-click connection

Please make sure that the routers to be paired are in the factory settings. If they are configured before, restore the factory

settings first (see the FAQ for how to restore the factory settings). Do not connect the network cable to the routers.

Power on the routers within 2 meters of the main router, and their indicators will start to blink quickly. Wait for a period of

time, the system indicators will turn to steady on, which means the routers are on. Press the Pairing button on the main

router, and its system indicator will start to blink. The main router will search for neighboring secondary routers for 2

minutes. After the search is over, the system indicator changes to steady on. When the system indicators on the

secondary routers blink, it means that two routers are being paired; when the system indicator changes to steady on, the

pairing completes.

3. Move the paired Reyee Mesh routers to the positions where the signal needs to be expanded, and power them on.

No more configuration is required.

After the router is powered on, the system indicator blinks, which means it is connecting to the main router. When the

system indicator turns to steady on, the connection is successful, and a distributed WiFi network can be constructed.

Figure 4-1 Main Router

Ensure the router can access the Internet. After pressing the button, the system indicator starts blinking. As the

detection ends after 2 minutes, it will stop blinking.

RG-EW1200G PRO Wireless Router Quick Installation Guide

Figure 4-2 Secondary Router

Do not connect with network cable. During pairing, the system indicator blinks. If pairing succeeds, it will stop

blinking.

5 LEDs

LED

Status

Description

System Status

Indicator

Off

The router is not powered on.

Steady On

The router is running normally.

Fast Blinking

Restoring factory settings/Rebooting.

Slow Blinking

Reyee Mesh is being paired or repeater stops.

Port Indicator

Off

The port is not connected or the cable disconnects.

Steady On

The port is connected normally.

Blinking

Data is being transmitting.

6 FAQs

Why can't I visit 192.168.110.1?

1. Check whether NIC is configured as DHCP.

2. Ensure the computer is connected to any of the LAN ports and the indicator is on; otherwise you may change the

cable and have a try again.

3. Re-open the browser (recommend to use Google Chrome) and visit 192.168.110.1 again.

4. Change the browser.

5. Change the cable or computer.

6. If all these methods fail, please restore the factory settings (hold the Reset button for 10s).

Why can't I access the Internet after configuration?

1. Check whether the cable is connected as the instruction, and the indicator is on.

2. Check the Internet connection type.

RG-EW1200G PRO Wireless Router Quick Installation Guide

a. If your ISP offers an account/password, please select PPPoE and enter your account/password.

b. If your ISP offers the static IP address, subnet mask, gateway and DNS, please select Static IP and enter the

information.

3. If you still can not access the Internet, please contact your ISP.

Inhaltsverzeichnis

Andere Ruijie Netzwerk-Router Handbücher

Ruijie

Ruijie Reyee RG-EG210G-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6200 Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW1300G Bedienungsanleitung

Ruijie

Ruijie RG-RSR77 Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG105GWT Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR20-X-28 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RSR10-01G-T-I Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW3200GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW Series Bedienungsanleitung

Ruijie

Ruijie RG-RSR77 Series Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW Series Anleitung zur Verwendung

Ruijie

Ruijie RSR10-01G Montageanleitung

Ruijie

Ruijie RG-RSR77 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG300GH-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR30-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Ruijie

Ruijie RSR30-X-SPU10 Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW3200GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW1800GX PRO Bedienungsanleitung

Ruijie

Ruijie RSR10 Series Montageanleitung

Ruijie

Ruijie RG-EG210G-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR20-14E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG209GS Installations- und Betriebsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung