Ruijie RG-MTFi-M520 Bedienungsanleitung

RG-MTFi-M520 Mobile LTE WiFi Router

Installation and Basic Configuration Guide V1.0

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks Website: http://www.ruijienetworks.com/

Service Email: [email protected]

Technical Support: http://www.ruijienetworks.com/service.aspx

Technical Support Hotline: +86-4008-111-000

Related Documents

Documents

Description

RG-MTFi-M520 Web Configuration

Manual

This document describes the Web-based configuration for MTFi-M520

device.

MTFi Authentication and CMS

Integration White Paper

This specification document is drafted for achieving the interaction among

MTFi devices and MACC/SAM/Third party portal. It can be used as a third

party application development reference.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of

data.

Installation and Basic Configuration Guide Preparation Before Installation

1 Preparation Before Installation

1.1 Product Overview

1.1.1 Product Types

According to antenna connection, devices can be divided into following types:

Number

Physical Features

Single 3G/4G module, one external GPS antenna

Single 3G/4G module, six external antennas

Dual 3G/4G modules, three external antennas

Dual 3G/4G modules, seven external antennas

1.1.2 RG-MTFi-M520

Front Panel

Figure 1-1 Front Panel

Rear Panel

Figure 1-2 Single 3G/4G Module and One External GPS Antenna

Figure 1-3 Single 3G/4G Module and Six External Antenna

Installation and Basic Configuration Guide Preparation Before Installation

Figure 1-4 Dual 3G/4G Modules and Three External Antennas

Figure 1-5 Dual 3G/4G Modules and Seven External Antennas

Top View

Figure 1-6 Top View

Installation and Basic Configuration Guide Preparation Before Installation

LED Indicators

LED

Color

Status

Description

PWR

Green

Solid on

RG-MTFi-M520 is powered on.

Off

RG-MTFi-M520 is powered off.

System

Green

Blinking

Initialization in progress.

Solid on

Startup completed.

WiFi1

Green

Off

2.4 GHz WiFi is disabled.

Solid on

2.4 GHz WiFi is enabled without data transmission.

Blinking

2.4 GHz WiFi is enabled with data transmission.

WiFi2

Green

Off

5 GHz WiFi is disabled.

Solid on

5 GHz WiFi is enabled without data transmission.

Blinking

5 GHz WiFi is enabled with data transmission.

3G/4G1

Green

Off

3G/4G1 is disabled.

Solid on

3G/4G1 is enabled without data transmission.

Blinking

3G/4G1 is enabled with data transmission.

3G/4G2

Green

Off

3G/4G2 is disabled.

Solid on/ Slow blinking

3G/4G2 is enabled without data transmission.

Rapid blinking

3G/4G2 is enabled with data transmission.

Green

Off

GPS is disabled.

Solid on

The device is not located.

Blinking

The device is located.

Antenna Port Identifier

Identifier

Description

4G-D

3G/4G antenna port

WiFi 1

WiFi antenna port

4G 1

3G/4G antenna port

Installation and Basic Configuration Guide Preparation Before Installation

Identifier

Description

Bluetooth antenna port

4G 2

3G/4G antenna port

WiFi 2

WiFi antenna port

GPS antenna port

1.2 Requirements

1.2.1 Temperature & Humidity Requirements

Please maintain a minimum clearance of 10cm at both sides and rear panel of the chassis to facilitate ventilation.

To ensure the normal operation and a prolonged useful life of RG-MTFi-M520, you must maintain an appropriate

temperature and humidity in the equipment room. Inappropriate temperature or humidity may damage the device.

Table 1-1 Temperature and Humidity Requirement

Temperature

Humidity

Long-time Working

Short-time Working

Long-time Working

Short-time Working

-20ºC to +70ºC

-40ºC to +85ºC

5% to 95%

The temperature and humidity are measured at the place 1.5m above the floor and 0.4m in the front of the front

panel without any cover.

1.2.2 Cleanness Requirements

Table 1-2 Dust Particle Limit

Substance

Concentration Limit (particles/m3)

Dust particles (diameter ≥0.5μm)

≤3.5×106

Dust particles (diameter ≥5μm)

≤3×104

The environment should also meet requirement in terms of salt, acid and sulfide in the air. These poisonous substances

may accelerate the corrosion of the metal and the aging of some parts. The environment should be protected from the

intrusion of harmful gases (for example, SO2, H2S, NO2and Cl2), requirements listed in table 1-3.

Table 1-3 Harmful Gas Limit

Gas

Average (mg/m3)

Maximum (mg/m3)

SO2

0.3

1.0

H2S

0.1

0.5

NO2

0.5

1.0

Cl2

0.1

0.3

Installation and Basic Configuration Guide Preparation Before Installation

The Average refers to the average limit of harmful gas in one week. The Maximum value is the upper limit of the

harmful gas measured in one week for up to 30 minutes per day.

1.2.3 Anti-interference Requirements

External interference may affect the system in the conductive ways such as capacitive coupling, inductive coupling, and

electromagnetic radiation.

Keep RG-MTFi-M520 away from like high-power radio stations, radar stations and high-frequency large-current

device.

Take EMI shielding measures, such as shielded cables.

Port cables must be managed indoor, so as to prevent port damage caused by lightening.

1.2.4 Installation Position Requirements

Verify the installation position and the power supply way before the installation. For better maintenance experience,

it is recommended that RG-MTFi-M520 should be installed on the rack above the driver seat. Then please verify the

power cable, antenna specifications and installation positions. Install RG-MTFi-M520 in a position free from

collisions, overheat, direct sunlight, waste, water, oil, and dust, and away from the gasbag controller, stereo

equipment, ABS system, and other electrostatic-sensitive devices.

Install RG-MTFi-M520 in a hidden, stable, shock-proof, heat-insulated, and water-proof position.

Secure RG-MTFi-M520 in accordance with Ruijie guidelines to prevent loosening and fall-off.

Keep ports of RG-MTFi-M520 away from damage caused by external factors. Ensure that LED indicators of

RG-MTFi-M520 can be conveniently observed.

For better user experience, please install the antennas properly to make the coverage area as large as possible and

minimize the interference. Please install the GPS antenna facing it toward the sky without any obstacle.

1.3 EMI

Various interference sources, from either outside or inside the device or application system, affect the system in the

conductive ways such as capacitive coupling, inductive coupling, and electromagnetic radiation.

Take measures to protect the power system from the interference of the electric grid.

The working ground of the routers should be properly separated and kept as far as possible from the grounding

device of the power equipment or the anti-lightning grounding device.

Keep RG-MTFi-M520 away from like high-power radio stations, radar stations and high-frequency large-current

device.

Take EMI shielding measures.

1.4 Installation Tools

Adjustable wrench

Electric drill

Installation and Basic Configuration Guide Preparation Before Installation

Screwdriver (Phillips screwdriver, hexagon socket-head screwdriver)

Diagonal pliers

Multimeter (or electrical tester pen)

Headlamp (flashlight)

20-mm hole saw

Nylon straps

No tools are shipped with device. Users need to prepare the necessary tools and accessories.

Hardware Installation and Reference Guide Product Installation

2 Product Installation

Make sure that you have read Chapter 1 carefully.

Make sure that the requirements in Chapter 1 are met.

Verify that all required accessories are complete according to the packing list.

2.1 Installation Procedure

Before installation, ensure that:

Sufficient airflow is available for the device.

Temperature and humidity requirements for the device are met.

The power supply is properly deployed and power requirements are met.

There is sufficient space for installing the device.

Install RG-MTFi-M520 to a mounting bracket. The following figure shows the installation procedure.

Install the antenna

Check RG-MTFi-

M520 after power-on

Verify the installation

End

Install the anti-theft panel

Install the power cable

Insert the SIM card

Install RG-MTFi-M520 in

a specified position using

a bracket

Andere Handbücher für RG-MTFi-M520

Inhaltsverzeichnis

Andere Ruijie Netzwerk-Router Handbücher

Ruijie

Ruijie Reyee RG-EW3000GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW1200G PRO Bedienungsanleitung

Ruijie

Ruijie RG-RSR20-14E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR30-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6200 Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Bedienungsanleitung

Ruijie

Ruijie RG-EG210G-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR20-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW Series Abmessungen

Ruijie

Ruijie Reyee RG-EW Series Bedienungsanleitung

Ruijie

Ruijie RSR30-X-SPU10 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR77-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG105GWT Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR77 Series Bedienungsanleitung

Ruijie

Ruijie RSR10-01G Montageanleitung

Ruijie

Ruijie Reyee RG-EG Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW1800GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-M18 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG209GS Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW3000GX PRO Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR10-02E Series Installations- und Betriebsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung