Ruijie RSR10-01G-T-I Series Installations- und Betriebsanleitung

RSR10-01G-T(W)-I V2.00 Series Router

Hardware Installation and Reference Guide

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup,

modification, transmission, translation or commercial use of this document or any portion of this document,

in any form or by any means, without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice.

Please obtain the latest information through the Ruijie Networks website. Ruijie Networks endeavors to

ensure content accuracy and will not shoulder any responsibility for losses and damages caused due to

content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the device.

This manual describes the functional and physical features and provides the device installation steps, hardware

troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.

Audience

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: http://caseportal.ruijienetworks.com

Community: http://community.ruijienetworks.com

Technical Support Email: [email protected]

Skype: [email protected]

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference

Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of

data.

Hardware Installation and Reference Guide Product Overview

1 Product Overview

Ruijie RSR10-01G-T(W)-I V2.00 series router is a data communication product independently developed by Ruijie

Networks Co. Ltd. by using advanced semiconductor technologies and communication control technologies. Ruijie

RSR10-01G-T(W)-I V2.00 series router is developed in full compliance with international standards; therefore, it is

similar to major routers in terms of use and configuration approach. Network administrators who are familiar with the

configuration commands of major routers may use the routers without receiving training first.

1.1 RSR10-01G-T(W)-I V2.00 Series Routers

1.1.1 Overview

RSR10-01G-T(W)-I V2.00 series routers adopt the 32-bit high-performance RISC microprocessors and

Ruijie-developed high-performance network operating system platform. In addition, the routers are compatible with the

standard configuration interface of the mainstream products, featuring simple configuration. RSR10-01G-T(W)-I V2.00

series routers provide diversified network security features.

Dimensions: 121 mm x 101 mm x 44 mm.

The following figure shows the appearance of the RSR10-01G-T(W)-I V2.00 router.

1.1.2 Features

Access density and processing capability

Hardware Installation and Reference Guide Product Overview

The product provides five FE LAN ports, one USB port, and 4G/3G/2G interface.

Reliability

The product adopts the backup center technology to greatly improve the network reliability, and provides multiple form

of backup to ensure requirements for highly reliable networks.

Compatibility

The product is fully compatible with devices supplied by other vendors.

Power supply

The high-quality power supply is selected to protect the product against the surge, overvoltage, undervoltage, and

overcurrent problems, ensure stable and reliable output, and support the function of protection against instant power

interruption.

Structure

The product can be placed on a workbench or mounted on the wall. It is quake-proof, and can run reliably and stably

under the high or low temperature.

1.1.3 Appearance and Indicators

The following figure shows the front panel and right side of the RSR10-01G-T(W)-I V2.00.

The following figure shows the rear panel of the RSR10-01G-T(W)-I V2.00.

Hardware Installation and Reference Guide Product Overview

FUNC button

WiFi status indicator

SYS indicator

Radio signal strength indicator

USB indicator

USB port

WiFi antenna port (ANT0)

FE RJ45 port

Speed indicator of the FE port

LINK/ACT indicator of the FE port

WiFi antenna port (ANT1)

Position of the screw used for mounting the

router on the right

4G antenna port (ANT1)

Power port (connected to the power adapter)

Grounding hole

4G antenna port (ANT0)

Position of the screw used for mounting

the router on the left

SIM card slot

The following figure shows indicators on the front panel of the RSR10-01G-T(W)-I.

The indicators are described as follows:

SYS: system indicator

Off: The host is not powered on.

Blinking green: The supervisor module is powered on and the host is being

started.

Solid red: The supervisor module is powered on and the host is in abnormal

state.

Solid green: The supervisor module is powered on and startup is completed.

Hardware Installation and Reference Guide Product Overview

4G signal strength indicators

All indicators off: There is basically no radio signal, and the wireless network

is unavailable.

One indicator on: The signal is poor.

Two indicators on: The signal is good.

Three indicators on: The signal is excellent.

USB: USB status indicator

Off: The USB device is not inserted.

Solid green: The USB device is properly identified.

FE indicator: LINK/ACT indicator

On: The link is properly connected.

Off: The link is disconnected.

Blinking: The link is sending or receiving data.

FE indicator: SPEED indicator

On: The port is connected at 100 Mbps.

Off: The port is connected at 10 Mbps.

WiFi status indicator

On: The WiFi function is operational.

Off: The WiFi function is not operational.

1.1.4 Specifications

Item

RSR10-01G-T(W)-I V2.00

FE Port

USB Port

3G/4G Port

Supporting four modes (TD-LTE, FDD-LTE, WCDMA, and GSM)

WiFi Port

802.11b/g/n 2X2

Processor

High-performance RISC network processor

DDR3 RAM

512 MB

Boot ROM

2 MB

Nand Flash

128 MB

Dimensions

(W x H x D)

121 mm x 101 mm x 44 mm

Input Voltage

Input of the power adapter: 90–264 V AC; 47/63 Hz

Power

Consumption

< 6 W

Operating

Temperature

-20°C to 60°C

Storage

Temperature

-40°C to 85°C

Hardware Installation and Reference Guide Features

The FE RJ45 port of a RSR10-01G-T(W)-I V2.00 series router can use the standard category 5 8-core unshielded

twisted pair (UTP) with the RJ45 connector.

Pinout of the Standard Network Cable

Pin No.

Orange/white

Orange

Green/white

Blue

Blue/white

Green

Brown/white

Brown

Pinout of the crossover cable

Pin No.

Orange/white

Green/white

Orange

Green

Green/white

Orange/white

Blue

Blue/white

Green

Orange

Brown/white

Brown

2 Features

For software functions, see the supporting software description.

2.1 Supporting Multiple Protocols

Applicable to various network environments.

Providing RJ-45 interfaces for twisted pairs, supporting Ethernet, ARP, and 802.1Q protocols.

Supporting the TCP/IP protocol stack and the protocols such as IP, Internet Control Message Protocol (ICMP),

Internet Group Management Protocol (IGMP), TCP and UDP on the network layer.

Supporting multiple dynamic routing protocols over IP, including RIP (V1/V2), RIPng, Open Shortest Path First

(OSPF) (V1/V2/V3), and policy-based routing.

Supporting the Simple Network Management Protocol (SNMP).

Supporting Telnet and reverse Telnet.

Supporting Dynamic Host Configuration Protocol (DHCP) Server, DHCP Client, DHCP Relay, and Trivial File

Transfer Protocol (TFTP).

Hardware Installation and Reference Guide Features

Supporting backup, Virtual Router Redundancy Protocol (VRPP) with high reliability.

Supporting Point-to-Point Protocol over Ethernet (PPPOE).

Supporting DNS static domain name resolution and Dynamic Domain Name Server (DDNS). DNS indicates

Domain Name System.

Supporting NAT, ACL and AAA.

Supporting Internet Protocol Security (IPSEC), Layer 2 Tunneling Protocol (L2TP), and Point to Point Tunneling

Protocol (PPTP).

2.2 User-Friendly Interfaces

Providing standard operating interfaces and intuitive configuration procedures with each command described in

details in on-line help.

Providing descriptions and examples of each command as well as comprehensive fault analysis.

2.3 Powerful Backup Function

Supporting route backup through routing protocols.

Supporting the interface backup function

2.4 Multiple Diagnosis and Management Tools

Providing complete debugging and tracing tools as well as complete DEBUG commands for easier accurate

location of various network faults.

Providing rich statistics and information display functions to allow the users to easily know the network

performance and running status.

Supporting SNMP for monitoring and controlling the router by using common network management software.

Supporting configuration over Telnet.

Supporting configuration based on Web UI.

2.5 Superior Security

Using perfect firewall and IP packet filtering technology to enforce strict check on network addresses, port

numbers, or protocol types.

Supporting AAA and RADIUS.

Realizing Password Authentication Protocol (PAP) and Challenge Handshake Authentication Protocol (CHAP) on

Point-to-Point Protocol (PPP), supporting callback, and enhancing security.

Providing level-based password check and security logs.

Implementing dynamic routing-protocol password/key authentication in OSPF and RIP V2.

Hardware Installation and Reference Guide Preparing for Installation

Supporting NAT.

Providing IPSEC/IKE data encryption

Supporting GRE tunnel encapsulation

Providing VLAN technology

2.6 Easy Upgrade

Supporting Web-based online upgrade.

Supporting the USB device for one-key system upgrade

3 Preparing for Installation

3.1 Precautions

Routers are critical repeaters in network connection, and affect the operation of the whole network.

The following are recommended during the installation and use of a router:

Keep the router dry.

Place the router away from heat sources.

Ensure the router is properly grounded.

Wear ESD wrist straps during installation and maintenance.

Do not plug/unplug any cables when energized.

Do not wear any loose clothes that may hook the components. Therefore, fasten your belts, scarves, and tuck the

sleeves.

Keep tools and components away from walking areas.

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions.

3.2 Preparing Installation Site

Ruijie routers are intended for indoor use. For their normal operation and maximum service life, they must be installed

at locations that meet the following requirements:

Temperature and humidity

Cleanness

ESD

Anti-interference

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ruijie Netzwerk-Router Handbücher

Ruijie

Ruijie RG-RSR20-X-28 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR77 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW1300G Bedienungsanleitung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Ruijie

Ruijie RSR10-01G Montageanleitung

Ruijie

Ruijie Reyee RG-EW Series Bedienungsanleitung

Ruijie

Ruijie RG-S6200 Series Bedienungsanleitung

Ruijie

Ruijie RG-R SR30 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW3000GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG300GH-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG105GWT Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG V2 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR77 Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW Series Abmessungen

Ruijie

Ruijie RG-RSR30-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG Series Bedienungsanleitung

Ruijie

Ruijie RSR30-X-SPU10 Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW3000GX PRO Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG210G-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW3200GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-M18 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG210G-E Installations- und Betriebsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung