Ruijie RG-S6200 Series Bedienungsanleitung

Installation Manual

RG-S6200 Series Switch

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification, transmission, translation

or commercial use of this document or any portion of this document, in any form or by any means, without the prior written consent of

Ruijie Networks is prohibited.

, , , , ,

,are registered trademarks of Ruijie Networks. Counterfeit is strictly prohibited.

Exemption Statement

This document is provided “as is“. The contents of this document are subject to change without any notice. Please obtain the latest

information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will not shoulder any

responsibility for losses and damages caused by content omissions, inaccuracies or errors.

Preface

Thank you for using our switches. This guide provides you with detailed operation guide that allows you to easily install and use the

switches.

Scope

This manual describes the functions and physical features of the switches, and presents the installation procedure, troubleshooting

procedure, technical specifications, and specifications and usages rules of cables and connectors. It is intended for the users that

have some experience in installing and maintaining network hardware and want to learn the above information. At the same time, it is

assumed that the users of this switch are already familiar with the related terms and concepts of Ethernet.

Document Structure

Chapter 1 "Product Overview" describes the main characteristics, technical specifications, and related modules of this product.

Chapter 2 "Preparation Before Installation" lists the safety, power supply, and site requirements that must be met before the

switch can be installed.

Chapter 3 “Product Installation” describes how to install the integrated switch and modules, and connect its power cables and

grounding lines.

Chapter 4 "System Debugging" describes the debugging after the switch is powered on for the first time.

Chapter 5 "Troubleshooting" describes possible problems, detections and solutions in the switch installation and application.

Appendix A “Connector and Connection Media”

Appendix B “Mini-GBIC Modules”

Appendix C “SFP+ Modules” and Technical Specifications

Appendix D “SFP+ Copper Cables” and Technical Specifications

Related Documents

Software manual of switches——covering CLI commands, software configuration guide, and version release notes.

Obtaining Documentation

You can obtain the documentation you need through the following channels:

Internet:

You can obtain the latest on-line documentation of Ruijie Networks at:

http://www.ruijie.com.cn

Documentation CD-ROM:

The documentation of Ruijie Networks switches is stored in the CD-ROM package, which is provided to you together with the product

you purchase. The CD-ROM is updated frequently, and may be more current than the printed documents.

Obtaining Technical Assistance

Ruijie Networks provides excellent technical support services for all our products. You can obtain the technical assistance you need

through any of the following channels:

Ruijie Networks website, from which you can obtain the latest product documentation, causes and problems analysis of product

faults, application solutions, and software upgrade. http://www.ruijie.com.cn/

Online customer services: Log in to Ruijie Networks website and click "Online Customer Services".

Between 9:00 a.m. and 6:00 p.m. from Monday to Friday, the Online Customer Services provide technical support such as

service-related consulting, remote debugging and troubleshooting, and software maintenance. You do not need to download a

client and can take snapshots in real time, send attachments, and rapidly copy common handling information. By information

exchange, engineers solve problems for you rapidly.

Customer service center of Ruijie Networks, which can provide all customers with needed technical assistance for products,

technologies and solutions. The customer service center provides responsive technical support for your product installation

problems, software configuration problems, and other network performance problems. http://www.ruijie.com.cn/service.aspx

Customer services hotline: +86-4008-111-000

Customer services email: [email protected].cn

Documentation Conventions

The symbols used in this document are described as below:

This symbol draws the attention of readers to some suggestions and references.

This symbol reminds readers to be alert of wrong operations that may lead to loss of data or damage to equipment.

Product Overview

The RG-S6200 series switches are the next-generation high-density full 10 G layer 3 IPv6 switches launched by Ruijie

Networks. They are mainly applicable to the data center and positioned at the End of Row (EoR), as well as at the Top of

Rack (ToR) to provide the convergence access for the servers and campus network with 10 G interfaces.

Table 1-1 RG-S6200-48XS switches

Model

10/100/1000Base-T

Self-adaptive

Ethernet Port

10 G

SFP+

Port

Console

Port

USB2.0

Port

Extension

Module

Slot

Redundant

Fan

Redundant

Power

Supply

RG-S6200-48XS 1 32 1 1 1 3+1 1+1

RG-S6200-48XS

Specifications

Model RG-S6200-48XS

Supported Module Type

Gigabit Ethernet:

Mini-GBIC-SX

Mini-GBIC-LX

Mini-GBIC-LH40

Mini-GBIC-ZX50

Mini-GBIC-ZX80

Mini-GBIC-ZX100

1000Base-T:

Mini-GBIC-GT

10 Gigabit Ethernet:

XG-SFP-SR-MM850

XG-SFP-LR-SM1310

The supported module type may change at any time. Contact

us for the detailed change information.

Supported SFP+ Direct Attached Cable

10 G SFP+ cable:

XG-SFP-CU1M

XG-SFP-CU3M

XG-SFP-CU5M

Supported Extension Module Type

M6200-16XS

The supported module type may change at any time. Contact

us for the detailed change information.

SFP+ Port Supported

SFP Port Supported

Supported RPS Type N/A

Power Supply

AC input:

Nominal voltage range: 100V to 240 V

Maximum voltage range: 90 V to 264 V

Maximum DC input: 280 V

Frequency: 50 Hz to 60 Hz

Nominal current: 10 A

Current sharing: supports built-in 1+1 power supply redundancy

Power Consumption

Maximum power consumption of the single power supply system: 350 W

(with 16 XS modules, and full load on the port)

Maximum power consumption of the dual-power supply system: 380 W

(with 16 XS modules, and full load on the port)

Maximum power consumption of the single power supply host: 289 W

(without 16 XS modules, but with full load on the port)

Maximum power consumption of the dual-power supply host: 310 W

(without 16 XS modules, but with full load on the port)

Operating Temperature 0ºC to 50ºC

Storage Temperature -40ºC to +70ºC

Operating Humidity 10% to 90% RH(non condensing)

Storage Humidity 5% to 90% RH

Fan Supports adjustment of fan speed and warning of fan trouble.

Supports the 3+1 redundant fan.

Temperature Warning Supports temperature warning and overheat protection functions

EMI GB9254-1998 CLASS A

Security Compliance GB4943-2001

Dimensions (W x D x H) 440 mm x 690 mm x 44 mm

Weight 13.5 kg

Product Appearance

The front panel of the RG-S6200 series provides thirty-two 10 G ports, one console port, one 10/100/1000Base-T

Ethernet port, and one USB2.0 port. The back panel provides two power slots and four fan slots. Figure 1-1 shows the

appearance with the M6200-16XS extension module.

Figure 1-1 Appearance of the RG-S6200 series switches

Front Panel

Figure 1-2 Front panel of the RG-S6200 series

Note: 1. Switch status indicator

2. PWR1 status indicator

3. PWR2 status indicator

4. MGMT management interface indicator

5. Fan status indicator

6. USB2.0 port

7. 10/100/1000Base-T MGMT Ethernet port

8. Console port

9. 10 G SFP+ interface

10. Port status indicator

11. Extension slot (take the M6200-16XS

extension module for the example)

Back Panel

The back panel of the RG-S6200 series provides the slots for the power supply modules and fan modules.

Figure 1-3 Back panel of the RG-S6200 series with M6200-FAN-F and RG-M6200-AC650I-F modules

Note: 1. Power supply module 1 slot (take the

RG-M6200-AC650I-F module for example)

2. Fan module slot (take the M6200-FAN-F

module for example)

3. Fan module slot (take the M6200-FAN-F

module for example)

4. Fan module slot (take the M6200-FAN-F

module for example)

5. Fan module slot (take the M6200-FAN-F

module for example)

6. Power supply module 2 slot (take the

RG-M6200-AC650I-F module for example)

7. Grounding pole

8. Power supply module1 RG-M6200-AC650I-F

status indicator

9. Fan module M6200-FAN-F status indicator

10. Fan module M6200-FAN-F status indicator

11. Fan module M6200-FAN-F status indicator

12. Fan module M6200-FAN-F status indicator

Power Supply

Requirements of Power supply are as follows:

AC input.

Rated pressure range: 100 V to 240 V

Maximum pressure range: 90 V to 264 V

Frequency: 50 Hz to 60 Hz

Maximum DC input: 280 V

Rated current: 10 A

Power cord: 10 A

The RG-S6200 series supports the RG-M6200-AC650I-F power supply modules. The power supply modules

are hot-swappable.

Dual power supply input: the switch can use either one power supply or two power supplies. When both two power

supplies are working normally, the switch is in current-sharing mode.

Heat Dissipation

The RG-S6200 series supports the heat dissipation scheme which combines the front-to-back air passage with power

backward heat dissipation, thereby ensuring the device to function normally in the specified environment. Sufficient space

(20 cm distance from both sides and the back plane of the cabinet) should be reserved to allow air circulation. Figure 1-4

shows the flow scheme of heat dissipation.

Figure 1-4 Flow scheme of front-to-back air passage heat dissipation

Indicators

Indicator Definition Description

Solid green The system has completed the initialization and is working

normally.

Blinking green The switch is being initialized with 3 HZ blinking frequency.

Solid yellow The temperature (at the air intake and outlet) exceeds the

normal operating temperature of the system.

Solid red System fault (any fault).

The temperature of any local component of the machine

exceeds the maximum temperature allowed for a component.

Status Indicates working

status of the system

Off The system has no power supply.

Solid green The power supply is working normally.

Solid yellow The working environment temperature of the power supply

exceeds the normal temperature range.

The power supply is not matched.

Solid red Power supply fault (any fault).

PWR1

Indicates status of

power supply

module Off The power supply is not in position.

The power supply is in position but not connected to the AC

terminal.

PWR2 Indicates status of Solid green The power supply is working normally.

Indicator Definition Description

Solid yellow The working environment temperature of the power supply

exceeds the normal temperature range.

The power supply is not matched.

Solid red Power supply fault (any fault).

power supply

module.

Off A.The power supply is not in position.

B.The power supply is in position but not connected to the AC

terminal.

Solid green Gigabit Link

Blinking green Gigabit ACT

Solid yellow 10/100M Link

MGMT Indicates working

status of out-of-band

management port. Blinking yellow 10/100M ACT

Solid green The fans are in position and are working normally.

Solid yellow One of the fans is not in position or is power off.

FAN

Indicates the fan

status. Solid red Any fan in the system is faulty.

Two or more than two fans are not in position or in the

powered-off status.

Solid green Port link is up.

Data is transmitted on the port.

Link/ACT

indicator Indicates the port

status. Off Port link is not up.

Modules

The RG-S6200 series supports the following modules:

M6200-16XS extension module for extending the RG-S6200 series .

M6200_AC650I-F power supply module for 1+1 redundancy.

M6200-FAN-F fan module for 3+1 redundancy.

M6200-16XS

Module Appearance

M6200-16XS: Sixteen 10 G ports for extension modules and 16 SFP0+ ports.

Figure 1-5 M6200-16XS extension module

Inhaltsverzeichnis

Andere Ruijie Netzwerk-Router Handbücher

Ruijie

Ruijie RG-RSR20-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG105GWT Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW Series Anleitung zur Verwendung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW1800GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG300GH-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW1200G PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW300 PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW3200GX PRO Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG105GW-X Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW Series Abmessungen

Ruijie

Ruijie RG-RSR77 Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW3000GX PRO Bedienungsanleitung

Ruijie

Ruijie RG-RSR77-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-EG210G-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG V2 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR77 Series Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW1300G Bedienungsanleitung

Ruijie

Ruijie RG-RSR10-02E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RSR10-01G Montageanleitung

Ruijie

Ruijie Reyee RG-EG210G-E Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung