Ruijie RG-RSR77 Series Betriebsanleitung
RG-RSR77 Series Router Routine Maintenance
and Troubleshooting
Contents
■Routine Maintenance Suggestions
■Common Problem Handling
■Factory Default Restoration of Devices
■Software Version Upgrade
■Obtaining Help
Preface
Revision History
Audience
Ruijie business partners and customers who are responsible for configuring
and maintaining Ruijie wireless devices.
Date
Change Contents
Reviser
2016.3
Initial
publication V1.0
TAC
Oversea
Note :
For more detail configuration , see configuration guide for each product . you can download
configuration guide at http://www.ruijienetworks.com
For more technical enquiry , you can visit Ruijie Service portal at
http://case.ruijienetworks.com . You need to sign up before submit a case.
Importance of Routine Maintenance
□Routine maintenance is a type of preventive maintenance. Through routine
maintenance, defects or hidden risks existing on devices can be identified
and eliminated in a timely manner and the health conditions of devices can
be maintained during normal running of the devices. Then, the devices run
securely, stably, and reliably in the long run.
Contents of Routine Maintenance
□Environment/Indicator maintenance
□Hardware status maintenance
□Active/Standby supervisor election and
status switching
□Card status maintenance
□Software version maintenance
□CPU status maintenance
Routine Maintenance Suggestions
□Memory status maintenance
□Flow table status maintenance
□Interface status maintenance
□Log maintenance
□Fault repairing
Routine Maintenance Suggestions
Environment/Indicator Maintenance
□Environment conditions:
▪The device shells, internal surface of the devices, dustproof filters inside
the chassis, and the floors are clean and free of dust. Clean or replace
dustproof filters of the cabinets in a timely manner.
▪Ensure that fans run properly during normal running of devices. Shutting
down fans arbitrarily will cause temperature rise inside the devices and
even damage the devices. Do not place sundries at the ventilation
openings of devices, so as not to affect the ventilation and heat dissipation
of cabinet doors and fan trays.
□Indicators:
▪In normal cases, the PWR and SYS indicators on the supervisor are on in
green. For details about indicators, see the RG-RSR77 Series Router
Datasheet.pptx or see the RG-RSR77 Series Router Hardware Installation
and Reference Guide.pdf.
Routine Maintenance Suggestions
Hardware Status Maintenance
□Run the show environment command to display the hardware running status:
▪RSR7708#show environment
Environmental status update at 23:4:53 2013-01-16.
Data is 5 second old, refresh in 30 second(s).
Power Supplies: //Running condition of power modules. "on"
indicates normal.
Power supply 1 is present. Unit is on.
Power supply 2 is present. Unit is on.
Power supply 3 is not present. Unit is off.
Fans working status:OK. //Running condition of the fan module. "OK"
indicates normal.
Temperature readings: //Internal temperature of the chassis
measured at 23 C
Hardware:
CPU name : Freescale MPC85xx.
CPU Speed: 1320M
□If an exception occurs, an alarm will be displayed.
Routine Maintenance Suggestions
Active/Standby Supervisor Election and Status Switching
□Election of active and standby supervisors:
▪After the device with dual supervisors is restarted, the M1 slot is selected as the active
supervisor and the M2 slot is selected as the standby supervisor.
▪When either of the M1 or M2 slot is selected as the active supervisor, if another
supervisor is hot-swapped, the active supervisor keeps unchanged and the inserted
supervisor serves as the standby supervisor.
▪If the standby supervisor is removed during device running, the device will not be affected.
If the active supervisor is removed during device running, the standby supervisor rapidly
serves as the active supervisor.
□Run the show ver slot command to check the active and standby states of supervisors:
▪RSR7708#show version slots
Dev Slot MaxPorts Configured-Module Online-Module Status
--- ---- -------- ----------------- ----------------- ------
1 M1 1 RSR7708-SRCMI RSR7708-SRCMI master
1 M2 1 RSR7708-SRCMI RSR7708-SRCMI slave
□Switching of active and standby supervisors:
▪Run the command to switch the active and standby supervisors:
RSR7708#redundancy forceswitch
▪You can remove and then insert the active supervisor to switch the active and standby
supervisors.
Routine Maintenance Suggestions
Card Status Maintenance
□Run the show version slot command to display the card running status:
▪The Status column displays the current status of cards.
▪The Configured-Module column indicates installed cards.
▪The Online-Module column indicates cards that are actually online.
▪Running: Indicates the normal status. A slot with a card inserted is in the
running state in normal cases.
Routine Maintenance Suggestions
Card Status Maintenance
□Description of Abnormal States of Cards and Restoration Operations
▪Installed: Indicates that a card is virtually loaded but is not actually
inserted. This state occurs in two cases: 1) One card is installed virtually
for command learning or pre-configuration. 2) A card is inserted before but
is removed now.
▫Restoration operation:
–Run the no install command to virtually delete the card of this slot,then
insert the card, and the device automatically identifies the card.
Ruijie(config)#no install 4/1 // 4/1 indicates the slot ID.
▪None: Indicates that no card is inserted and no card is manually installed.
The slot is in the empty state. If a card is actually inserted but is in the
None state, remove the card and insert it again. If the card cannot be
restored to the normal state, a hardware fault may exist.
Routine Maintenance Suggestions
Card Status Maintenance
□Description of Abnormal States of Cards and Restoration Operations
▪Conflict: Indicates the model of an virtually installed card is inconsistent with that of a
card that is actually inserted. Another card has been inserted into this slot before or
manually virtually installed in this slot. As a result, the virtually installed card is
inconsistent with the card that is actually inserted and the card cannot work properly.
▫Restoration operation:
–Run the no install command to manually delete the card of this slot.
–Ruijie(config)#no install 1/1 // 1/1 indicates the slot ID.
–Run the install command to install the card that is actually inserted.
–Ruijie(config)#install 1/1 FNM-4POS-STM1
▪Run-remove: Indicates that a card is powered off by running the remove command.
▫Restoration operation:
–Run the no remove command to power on the card again.
–Ruijie(config)#no remove 1/2
–You can also hot-swap the card so that the card can be re-identified.
Andere Handbücher für RG-RSR77 Series
3
Inhaltsverzeichnis
Andere Ruijie Netzwerk-Router Handbücher
Ruijie
Ruijie Reyee RG-EG105GWT Installations- und Betriebsanleitung
Ruijie
Ruijie Reyee RG-EW3000GX PRO Bedienungsanleitung
Ruijie
Ruijie RSR30-X-SPU10 Installations- und Betriebsanleitung
Ruijie
Ruijie Reyee RG-EG209GS Installations- und Betriebsanleitung
Ruijie
Ruijie Reyee RG-NBR-E Series Bedienungsanleitung
Ruijie
Ruijie RSR10-01G Montageanleitung
Ruijie
Ruijie Reyee RG-EW300 PRO Bedienungsanleitung
Ruijie
Ruijie RG-S6200 Series Bedienungsanleitung
Ruijie
Ruijie Reyee RG-EW3200GX PRO Bedienungsanleitung
Ruijie
Ruijie Reyee RG-EW1200G PRO Bedienungsanleitung
Ruijie
Ruijie Reyee RG-EG300GH-E Series Installations- und Betriebsanleitung
Ruijie
Ruijie Reyee RG-EG Series Bedienungsanleitung
Ruijie
Ruijie Reyee RG-EW Series Bedienungsanleitung
Ruijie
Ruijie Reyee RG-EG105GW-X Installations- und Betriebsanleitung
Ruijie
Ruijie Reyee RG-EW1200 Bedienungsanleitung
Ruijie
Ruijie Reyee RG-EW3000GX PRO Installations- und Betriebsanleitung
Ruijie
Ruijie RG-RSR20-X-28 Series Installations- und Betriebsanleitung
Ruijie
Ruijie RG-RSR77-XA Series Installations- und Betriebsanleitung
Ruijie
Ruijie RG-RSR77 Series Installations- und Betriebsanleitung
Ruijie
Ruijie RSR10-01G-T-I Series Installations- und Betriebsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise