Ruijie RG-RSR10-02E Series Installations- und Betriebsanleitung

RG-RSR10-02E Series Routers

Hardware Installation and Reference Guide 1.20

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup,

modification, transmission, translation or commercial use of this document or any portion of this document,

in any form or by any means, without the prior written consent of Ruijie Networks is prohibited.

, , , ,

, ,

, , ,

, , are registered trademarks of Ruijie

Networks. Counterfeit is strictly prohibited.

Exemption statement

This document is provided “as is”. The contents of this document are subject to change without any notice.

Please obtain the latest information through the Ruijie Networks website. Ruijie Networks endeavors to

ensure content accuracy and will not shoulder any responsibility for losses and damages caused due to

content omissions, inaccuracies or errors.

Preface

Thank you for using our products. This manual will guide you through the installation of the router.

Scope

It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it

is assumed that the users are already familiar with the related terms and concepts.

Obtaining Technical Assistance

Ruijie Networks website: http://www.ruijienetworks.com/

Online customer services: http://webchat.ruijie.com.cn

Customer service center: http://www.ruijie.com.cn/service.aspx

Customer services hotline: +86-4008-111-000

BBS: http://support.ruijie.com.cn

Customer services email: [email protected]

Related Documents

Documents Description

Configuration Guide Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Documentation Conventions

The symbols used in this document are described as below:

This symbol brings your attention to some helpful suggestions and references.

This symbol means that you must be extremely careful not to do some things that may damage the device or

cause data loss.

Chapter 1 Product Overview

The Ruijie 10-02E series Reliable multi-Service Router (RSR) is a proprietary data communications product developed

with advanced semiconductor and communication & control technologies. The RSR10-02E series routers are in

compliance with international standards and are interoperable with mainstream routers both in operation and configuration

methods. If you are familiar with configuration commands of mainstream routers, you may read this manual without any

prior training.

About the RG-RSR10-02E

The RSR10-02E modular router is an enterprise-class networking product integrating a high-performance 32-bit Reduced

Instruction Set Computing (RISC) microprocessor. The router is based on Ruijie RGOS operating system that provides an

industry-standard command line interface. The router integrates routing, switching, voice, security, transmission and video,

and satisfies personalized requirements in various application environments. The router also provides rich software

features such as Voice over Internet Protocol (VoIP), Virtual Private Network (VPN), Internet Protocol Version 6 (IPv6),

Multicast VPN Routing & Forwarding (MVRF), Multi-Protocol Label Switching (MPLS), multicasting as well as backup

schemes and Quality of Service (QoS) features. The features are applied to solutions of access services such as data,

video and voice. These features enable a three-network-in-one solution for small and medium enterprises.

The RSR10-02E modular router supports up to two optional Smart Interface Cards (SIC).

Different SIC slots support different SIC cards. For your convenience, each slot is marked with the supported SIC types.

There are five types of SIC cards in total. See Table 1-1.

Table 1-1 SIC Cards Supported by the RSR10-02E Router

Type Supported SIC Cards

A SIC-8A, SIC-1B-U, SIC-1B-S/T, SIC-2FXS,SIC-2FXO,SIC-SEC encrypted key

B SIC-1HS, SIC-3G-TD,SIC-3G-CDMA,SIC-3G-WCDMA

C SIC-1CE1, SIC-1E1-F

D N/A

E SIC-3G-CDMA-E, SIC-3G-WCDMA-E, SIC-3G-WCDMA-H-E

Table 1-2 SIC Types Supported by Each SIC Slot on the RSR10-02E Router

Type A Type B Type C Type D Type E

Slot 2 Supported Supported Supported Not Supported Supported

Slot 3 Supported Supported Supported Not Supported Supported

The entire device supports one SIC-SEC with the key encryption function in any slot.

For your convenience, each slot is marked with the supported SIC types. For example, in Figure 1-1, SIC SLOT 3

supports Type A, Type B, Type C, and Type E SIC cards. SIC SLOT 2 supports Type A, Type B, Type C and Type E SIC

cards.

Figure 1-1 SIC Types Marked Above the SIC SLOT 3 and SLOT 2

Figure 1-2 Part of Back Panel of the RSR10-02E Series Routers

Technical Specifications

Table 1-3 Technical Specifications of the RSR10-02E Router

Model RSR10-02E

Interfaces

1 Console port

1 AUX port

1 USB interface

1 SD card interface

1 FUNC button

8 10/100 Mbps Ethernet ports

2 Gigabit Ethernet ports

SIC Slots 2

Note: You can configure up to two SIC modules as required.

Processor RISC

BOOT ROM 2 MB

NAND FLASH 128 MB

DDR II 512 MB

Input Voltage 100 VAC to 240 VAC, 50 Hz to 60 Hz

Power Consumption Less than 25 W

Operating

Temperature 0°C to 45°C

Storage Temperature -40°C to 70°C

Operating Humidity 10% to 95% RH

Dimensions

(W x H x D) 288 mm x 44 mm x 204 mm

Product Features

Access density and processing capacity

The two SIC slots support up to 2 non-channelized E1 interfaces, 2 ISDN U or S/T interfaces, 2 synchronous serial

interfaces, or 16 asynchronous serial interfaces, 2 3G networks to provide a high-density solution for remote office. The

router has 8 fast Ethernet ports, and 2 Gigabit Ethernet ports. It offers a FUNC button to upgrade the RGOS operating

system from an SD card or USB stick to the router. The E1 interface complies with ITU-T G.703, the ISDN U interface

complies with ITU-T G.961 ANSI T1.601, and the ISDN S/T interface complies with ITU-T I.430. The synchronous serial

interface can connect to the Digital Divide Network (DDN), frame relay, and X.25 networks. These features make the

router an ideal access router for medium- and large-sized branches.

Reliability

The router adopts backup center technologies, which greatly improves network reliability. Various backup modes are

available for high reliability requirements.

Compatibility

The router is fully compatible with devices from other vendors.

Power supply

By using high-quality standard power supplies, the router provides protection against surge, overvoltage, undervoltage,

overcurrent to deliver stable and reliable output. In addition, it supports transient power interruption protection.

Construction

With the rack mount 1U chassis with EMI shielding, the router is highly resistant to shock, high/low temperature, and

electromagnetic radiation, and works stably.

Certificate

The router has passed the network access license (NAL) testing by the Ministry of Information Industry (MII), P.R. China.

Product Images

Front Panel

Figure 1-3 Front Panel of the RSR10-02E Router

Note: 1: FE1/0 to FE1/7 indicator

2: FE1/0 to FE1/7 port

3: GE0/0 to GE0/1 port

4: GE0/0 to GE0/1 port indicator

5: Console port

6: Aux ports

7: SD card interface

8: SD indicator

9: USB interface

10: FUN button

11: PWR indicator, SYS indicator, USB indicator

12: Ruijie Networks RSR10 Series logo

LED Indicators

Table 1-4 LED Indicators on the RSR10-02E Router

Indicator Status Meaning

SYS

Off The router is not receiving power.

Blinking green The router starts up.

Solid green The router is operational.

Solid red The router is not working properly.

PWR Off Power off.

Solid green Power on.

Off SD card is not present.

Green on SD card is connected to the device and is recognized.

Blinking green SD card is receiving or transmitting data.

Solid red or blinking red SD card is not working properly.

USB

Green on USB device is connected to the device and is recognized.

Blinking green USB device is receiving or transmitting data.

FE Port

Off No link.

Solid green FE port link up at 10/100 Mbps.

Blinking green FE port link up at 10/100 Mbps, and is receiving or transmitting data.

GE Port

Off No link.

Solid green GE port link up at 1000 Mbps

Blinking green GE port link up at 1000 Mbps, and is receiving or transmitting data.

Solid yellow GE port link up at 10/100 Mbps.

Blinking yellow GE port link up at 10/100 Mbps, and is receiving or transmitting data.

Back Panel

Figure 1-4 Back Panel of the RSR10-02E Router

Note: 1: SLOT 3

2: SLOT 2

3: Power switch

4: Power receptacle

5: Chassis ground connector

If you cannot determine which slot is occupied by the current module, you can run the show slots command

in privileged EXE mode to view the slot number in router version information

About Fixed Ports

This section describes fixed ports on the RSR10-02E series router.

Console Port and Auxiliary Port

Features

The RSR10-02E series router provides one console port and one AUX port.

Table 1-5 Specifications of the Console port

Index Parameter

Interface Standard EIA/TIA-RS232

Connector RJ-45

Rate Supports 9600 to 115200 bps baud rates. The configurable frequency points are 9600, 57600

and 115200 bps. The default is 9600 bps.

Table 1-6 Specifications of the AUX port

Index Parameter

Interface Standard EIA/TIA-RS232

Connector RJ-45

Rate Supports 9600 to 115200 bps baud rates. The configurable frequency points are 9600,

19200, 38400, 57600 and 115200 bps. The default is 9600 bps.

Cables

Serial cables are supplied with the RSR10-02E router.

FE Ports

Port Image and LED Indicators

The following figure shows the fixed FE ports and its corresponding Link/ACT LED indicators.

Figure 1-5 FE Ports and Corresponding LED Indicators

For descriptions of FE port Link/ACT LED indicators, see the “LED Indicators” section in Chapter 1.

An RSR10-02E series router provides eight fixed 10/100 Mbps Ethernet ports.

The following table describes the basic features of the Ethernet ports.

Table 1-7 Specifications of the FE ports

Protocol IEEE Std 802.3-2008

Quantity 8

Interface Type 10Base-T/100Base-TX interface

Cables

All FE ports use Category 5 unshielded twisted pair (UTP) RJ-45 cables.

Straight-through cable: All wire pairs are in the same order on each end of the RJ-45 cable. The straight-through cable

is used to connect a terminal device such as a PC or router to a hub or LAN switch.

Crossover cable: Pin 1 and pin 2 at one end of the cable correspond to pin 3 and pin 6 at the other end, respectively. The

crossover cable is used to connect two terminal devices, such as connecting a PC to a PC, and connecting a router to a

router.

If the port supports Auto-MDI/MDIX, both straight-through and crossover cables can be used.

Considering that you may customize cables, the following section describes how to wire straight-through and crossover

cables.

As shown in the following figure, the pins of the RJ-45 connector are numbered 1 to 8, counting from left to right when the

connector is viewed from the side without the latching tab.

Figure 1-6 RJ-45 Connector Pin Number

For a straight-through cable, use the same wiring.

Figure 1-7 Straight-through Wiring Diagram

For a crossover cable, swap the positions of the two pairs.

Figure 1-8 Crossover Wiring Diagram

Inhaltsverzeichnis

Andere Ruijie Netzwerk-Router Handbücher

Ruijie

Ruijie Reyee RG-EW3000GX PRO Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW Series Abmessungen

Ruijie

Ruijie RG-EG210G-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-MTFi-M520 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG210G-E Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG V2 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW1800GX PRO Bedienungsanleitung

Ruijie

Ruijie RG-RSR20-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EG Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EG105GWT Installations- und Betriebsanleitung

Ruijie

Ruijie RSR30-X-SPU10 Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-M18 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-EW1200 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-NBR-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR77 Series Bedienungsanleitung

Ruijie

Ruijie RG-RSR77-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR20-14E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR77 Series Betriebsanleitung

Ruijie

Ruijie RG-RSR77 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-RSR30-XA Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-EW1200G PRO Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung