Samsung POWERbot SR10M70 Series Bedienungsanleitung

POWERbot

User manual

SR10M70****, SR20M70**** Series

• Before operating this unit, please read the instructions carefully.

• For indoor use only.

VR7000_EN_DJ68-00763D-09_SA.indd 1 2017-12-19 오후 4:17:27

ENGLISH-02

Contents 03 Safety information

08 Installation

Accessories / Installation note

10 Charging

Automatic charging / Recharging / Low

battery (Lo)

12 Using POWERbot

Turning the power on/off / Selecting

cleaning modes/ Using special cleaning

functions

16 Using the remote control

19 Name of each part

Top / Bottom / Display panel

21 Setting time/schedule

Setting the time / Setting the schedule

24 Cleaning and maintaining

Cleaning the dustbin / Cleaning the sensors and

the camera / Cleaning the brush and Auto shutter

tool / Cleaning the Driving wheel

26 Samsung Connect App

30 Notes and cautions

Charging / Using / Cleaning and maintenance /

About the battery / About the IrDA sensor

32 Information codes

34 Troubleshooting

38 Open Source Announcement

39 Specications

VR7000_EN_DJ68-00763D-09_SA.indd 2 2017-12-19 오후 4:17:28

ENGLISH-03

Safety information

SAFETY INFORMATION

WARNING

• Before operating the appliance, please read this manual thoroughly and

retain it for your reference.

WARNING

• Because these following operating instructions cover various models, the

characteristics of your vacuum cleaner may differ slightly from those

described in this manual.

CAUTION/WARNING SYMBOLS USED

WARNING

Indicates that a danger of death or serious injury exists.

CAUTION

Indicates that a risk of personal injury or material damage exists.

OTHER SYMBOLS USED

NOTE

Indicates that the following text contains additional important

information.

VR7000_EN_DJ68-00763D-09_SA.indd 3 2017-12-19 오후 4:17:28

ENGLISH-04

Safety information

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should be observed, including

the following:

READ ALL INSTRUCTIONS BEFORE USING YOUR POWERbot.

Unplug the battery charger / docking station from outlet when not in use and before

conducting maintenance.

WARNING: to reduce the risk of re, electric shock, or injury:

GENERAL

• Use only as described in this manual.

• Do not operate POWERbot or the battery charger / docking station if it has

been damaged in any way.

• If the vacuum cleaner is not working as it should, has been dropped, damaged,

left outdoors, or dropped in water, return it to a customer care center.

• Do not handle the battery charger / docking station or POWERbot with wet

hands.

• Use only on dry, indoor surfaces.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety. Cleaning and user

maintenance shall not be made by children without supervision.

• If the supply cord is damaged, it must be replaced by the manufacturer or its

service agent or a similarly qualied person in order to avoid a hazard.

Battery charger / Docking station

• Do not modify the polarized plug to t a non-polarized outlet or extension

cord.

• Do not use outdoors or on wet surfaces.

• Unplug the battery charger / docking station from the outlet when not in use

and before servicing.

• Use only the battery charger / docking station supplied by the manufacturer to

recharge.

• Do not use with a damaged cord or plug or a loose power outlet.

• Do not pull or carry by the cord, use the cord as a handle, close the door on the

cord, or pull the cord around sharp edges or corners. Keep the cord away from

heated surfaces.

VR7000_EN_DJ68-00763D-09_SA.indd 4 2017-12-19 오후 4:17:28

ENGLISH-05

• Do not use extension cords or outlets with inadequate current carrying

capacity.

• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.

• Do not mutilate or incinerate batteries as they will explode at high

temperatures.

• Do not attempt to open the battery charger / docking station. Repairs should

only be carried out by a qualied customer care center.

• Do not expose the battery charger / docking station to high temperatures or

allow moisture or humidity of any kind to come into contact with the battery

charger / docking station.

• Do not charge the non-rechargeable batteries with charger.

POWERbot

• Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc.

• Do not use without a lter in place. When servicing the unit, never put ngers

or other objects into the fan chamber in case the unit accidentally turns on.

• Do not put any objects into openings. Do not use with any openings blocked;

keep openings free of dust, lint, hair, and anything that may reduce air ow.

• Do not pick up toxic materials (chlorine bleach, ammonia, drain cleaner, etc.).

• Do not pick up anything that is burning or smoke, such as cigarettes, matches,

or hot ashes.

• Do not use to pick up ammable or combustible liquids such as gasoline, nor

use on areas where they may be present.

• Locations with candles or desk lamps on the oor.

• Locations with unattended res (re or embers).

• Locations with distilled alcohol, thinner, ashtrays with burning cigarettes, etc.

• Do not use POWERbot in an enclosed space lled with vapours given off by oil

based paint, paint thinner, moth proong substances, ammable dust, or other

explosive or toxic vapours.

• Leaks from battery cells can occur under extreme usage or temperature

conditions. If the liquid gets on skin, wash quickly with water. If the liquid gets

into the eyes, ush them immediately with clean water for a minimum of 10

minutes. Seek medical attention.

VR7000_EN_DJ68-00763D-09_SA.indd 5 2017-12-19 오후 4:17:28

ENGLISH-06

WARNING Power related

fPlease prevent any risk of electric shock

or re.

– Do not damage the power cord.

– Do not pull the power cord too hard or

touch the power plug with wet hands.

– Do not use a power source other than 100-

240V~and also do not use a multi outlet

to supply power to number of devices

at the same time. (Do not leave the cord

carelessly on the oor.)

– Do not use a damaged power plug, power

cord or loose power outlet.

fClean dust or any foreign matters on the

pin and contact part of the power plug.

– There is a risk of electric shock or

malfunction.

WARNING Before use

fDo not use POWERbot near combustible

materials.

– Place near candle, desktop lamps, replace

or near combustible materials such as

gasoline, alcohol, thinners etc.

fThe POWERbot is intended for household

use therefore do not use it in an attic,

basement, storage, industrial building,

out of indoor space, places with moisture

(such as bathroom, laundry), on the table

or shelves.

– The POWERbot can be damaged or

malfunction.

fBe sure POWERbot does not pass through

or touch any kind of liquids.

– The POWERbot can be severely damaged

and it may contaminate other areas if the

wheels pass through liquid.

fAttach the boundary markers on a place

where the POWERbot may fall such as

a stair or banister to prevent product

damage and injury.

– Please keep the cliff sensor clean all the

time for safety.

fDo not spill any liquids on the docking

station.

– There is a risk of re or electric shock.

fDo not use the docking station for

anything other than its intended purpose.

– There is a risk of re or severe damage to

the docking station.

fAlways keep the cliff sensor clean for

your safety.

WARNING In use

fIf any abnormal sounds, smells or smoke

come from POWERbot, immediately shut

off the emergency switch at the bottom

of POWERbot and contact a service

center.

WARNING Cleaning and

maintenance

fWhen power cord is damaged, contact

a service center to get it replaced by a

certied repairman.

– There is a risk of re or electric shock.

fPlease check with a Samsung Electronics

service center when exchanging

batteries.

– Using batteries from other products can

cause malfunction.

CAUTION Before use

fInsert the dustbin before using

POWERbot.

fBe careful with the followings for proper

automatic recharging.

– Always turn on the power of the docking

station.

– Install the docking station where

POWERbot can easily nd.

– Do not leave any object in front of the

docking station.

Safety information

VR7000_EN_DJ68-00763D-09_SA.indd 6 2017-12-19 오후 4:17:28

ENGLISH-07

fWhen installing the docking station, do

not leave the cord carelessly on the oor

since POWERbot may get tangled by it.

fDo not use POWERbot on black colored

oors.

– The POWERbot may not be able to operate

normally.

fDo not place any objects within 0.5m

to both sides and 1m to the front of the

docking station.

fMake sure the docking station's charging

contact is not damaged or have any

foreign matters on it.

fDo not install the docking station in an

area with a dark oor.

– If the oor around the docking station is

dark, recharging is hindered.

fMove any obstacles that may disturb

POWERbot's movement (such as

children's indoor swing or slides) before

cleaning.

fDo not use the POWERbot in a place

which is narrower than the turning

radius (0.5 m or less) of the POWERbot.

fTo clean all areas of your house, open all

rooms and attach the boundary markers

on the places where the POWERbot

may get damaged such as a front door,

veranda, bathroom, and stairs for safety.

fFor the very low areas where the

POWERbot may get stuck, attach the

boundary markers to prevent the

POWERbot from getting in.

fIf a brush or brush cover is not

assembled correctly, scratches may occur

on the oor, or product malfunction may

occur.

fBefore operating the POWERbot, remove

the objects which could break such as

a frame, mirror, and porcelain items

so that the POWERbot works without

interruption.

CAUTION In use

fUsing POWERbot on thick carpet may

damage both POWERbot and the carpet.

– The POWERbot cannot pass over carpet

that is thicker than 1 cm.

fDo not use POWERbot on tables or other

high surfaces.

– There is a risk of damage if it falls.

fThe POWERbot may bump into chair,

desk legs therefore move them away for

faster and efcient cleaning.

fWhen POWERbot is operating, do not lift

it up or carry it to another area.

fDo not hold by driving wheels of

POWERbot when carrying it to another

area.

fDo not put any objects on top of

POWERbot and camera since it may

cause malfunction.

fRemove any large papers or plastic bags

immediately when using POWERbot since

they may block the intake.

fDo not aim the red pointer directly at

people or animals.

fDo not lie down around the POWERBOT

that is running.

– Your hair may be caught in the brush,

resulting in physical injury.

CAUTION Cleaning and

maintenance

fPrevent any damage to POWERbot by

complying with the following

– Do not clean POWERbot by spraying water

directly onto it or use benzene, thinner,

acetone or alcohol to clean it.

fDo not disassemble or repair POWERbot.

This should only be done by a certied

repairman.

fAlways keep the obstacle sensor, cliff

sensor and camera clean.

– If foreign matter accumulates, sensors may

malfunction.

VR7000_EN_DJ68-00763D-09_SA.indd 7 2017-12-19 오후 4:17:29

ENGLISH-08

DC-IN

1Connect the

battery charger

jack to the

docking station

2Connect the

power cord

to the battery

charger

When using the battery

charger, the side with the

sticker attached must face

down.

3Connect the

power plug to

the outlet

Installation

The docking station must be plugged in and turned on at all times.

About 1m

About

0.5m

About

0.5m

Install the docking station in

a place without obstacles and

danger of falling.

VR7000_EN_DJ68-00763D-09_SA.indd 8 2017-12-19 오후 4:17:30

ENGLISH-09

Accessories

Remote control

(Optional)

Batteries (AAA type)

(Optional)

User manual Spare lter (Optional)

Docking station Power cord Battery charger Boundary markers

(Optional)

 Accessories may differ depending on the models.

 Refer to page 15 for the installation of boundary markers.

 Battery Spec

SR10M70**** series : Lithium-ion, 21.6V, 1800mAh, 6cell

SR20M70**** series : Lithium-ion, 21.6V, 3600mAh, 12cell

Installation note

Note

fInstall the docking station in a place where the oor and wall are level.

fIt is best to install the docking station along the grain of wooden oors.

fIf the emergency switch is off, the POWERbot will not charge even if it is docked on the

docking station.

fAlways turn on the power of the docking station.

– If power is not supplied to the docking station, the POWERbot cannot nd it and cannot

automatically recharge.

– If the POWERbot is left detached from the docking station, the battery will drain naturally.

fIf the POWERbot is in sleep mode, power will not come on even if the emergency switch

is turned off and then on. Press and hold the [Start/Stop] button on the POWERbot to turn

the sleep mode off.

VR7000_EN_DJ68-00763D-09_SA.indd 9 2017-12-19 오후 4:17:32

ENGLISH-10

After completely charging the POWERbot for the rst time (after purchase), it can be used for 60

min. in Nomal ( ) mode. (Refer to the page 39 for the charging time.)

Smart Charging

If POWERbot runs out of charge in Auto clean mode, it will automatically return to the docking

station to be charged and will recommence the cleaning to complete the cleaning area after two-

third of battery charging is done. (Max. 2 times).

Charging

1Turn on the

emergency switch

on the bottom

You must turn on the

emergency switch to turn on

the POWERbot.

Press and release the

button.

Manually charge

the POWERbot by

placing it on the

docking station

Make sure the charging

pins on the POWERbot

and the docking station

are aligned.

3Check the

charging status

For SR10M701*** Series,

The battery indicator blinks at 1 sec.

intervals during charging and the indicator

will remain in ON status when fully charged.

For SR10M702*** / SR10M703*** / SR10M704*** /

SR20M70**** Series,

" " will turn on according to charging

progress and "FULL" will turn on when

charging is complete.

WARNING

• Rated input voltage of

this product is 100-

240V~.

<SR10M702***/ SR10M703***/

SR10M704***/ SR20M70**** Series>

<SR10M701*** Series>

VR7000_EN_DJ68-00763D-09_SA.indd 10 2017-12-19 오후 4:17:33

Andere Handbücher für POWERbot SR10M70 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Staubsauger Handbücher

Samsung

Samsung POWERbot SR20J90 U Series Bedienungsanleitung

Samsung

Samsung POWERbot VR2AR7260W Bedienungsanleitung

Samsung

Samsung VC-5814 Bedienungsanleitung

Samsung

Samsung SC47 Series Bedienungsanleitung

Samsung

Samsung SC5370 Bedienungsanleitung

Samsung

Samsung SC21F50 Series Bedienungsanleitung

Samsung

Samsung SC15F30 Series Bedienungsanleitung

Samsung

Samsung VCDC08 series Bedienungsanleitung

Samsung

Samsung SU9360 Bedienungsanleitung

Samsung

Samsung SC56BO Bedienungsanleitung

Samsung

Samsung VCDC15 series Bedienungsanleitung

Samsung

Samsung VR20T6001M Series Bedienungsanleitung

Samsung

Samsung POWERbot SR20J92 Series Bedienungsanleitung

Samsung

Samsung VS15T70 Series Bedienungsanleitung

Samsung

Samsung VS28C97 Series Bedienungsanleitung

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung SW17H90 Series Bedienungsanleitung

Samsung

Samsung VS15T70 Series Bedienungsanleitung

Samsung

Samsung sr8894 Bedienungsanleitung

Samsung

Samsung SC07F50 series Bedienungsanleitung

Samsung

Samsung SC45 Series Bedienungsanleitung

Samsung

Samsung SR8730 Bedienungsanleitung

Samsung

Samsung VC-6000 SERIES Merkblatt

Samsung

Samsung VC-5914V Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch