Samsung POWERbot SR20K9350W Series Bedienungsanleitung

ART WORK SPEC

Product

Model/PJT

Changes Note: Full guide_REV. UP, 4 / REV. UP

Vacuum CleanerHQ R&D PIC: Jungran Kim

Material: Wood Free 80g VR9300K

Design: Hyunwoo Lim

Size: 182mm x 257mm (Base)

148mm x 210mm (print)

Page: 64 Print Color: Black Part Code DJ68-00743H

Date: 2020-01-15 Post Processing : Cut Rev No 07 → 08

POWERbot

Quick reference guide

SR20K9350W* Series

• Before operating this unit, please read the instructions carefully.

• For indoor use only.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 1 2020-01-14 오후 9:59:29

English-2

Parts list

Main

body

Basic

Parts

Remote

control

Docking

Station

Batteries (AAA type) Quick reference guide Spare lter Cleaning brush

Power cord Battery Charger Virtual guard

 Accessories may differ depending on the models.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 2 2020-01-14 오후 9:59:32

English-3

Safety information

2-1

• Before operating the appliance, please

read this manual thoroughly and retain it

for your reference.

• Because these following operating

instructions cover various models, the

characteristics of your vacuum cleaner

may differ slightly from those described

in this manual.

Caution/Warning symbols used

WARNING

Indicates that a danger of death or serious

injury exists.

CAUTION

Indicates that a risk of personal injury or

material damage exists.

Other symbols used

NOTE

Indicates that the following text contains

additional important information.

Indicates that a detachable supply unit.

• For information on Samsung’s

environmental commitments and product

specic regulatory obligations e.g. REACH

(WEEE, Batteries) visit: samsung.com/

uk/aboutsamsung/samsungelectronics/

corporatecitizenship/data_corner.html

Important safety instructions

When using an electrical appliance, basic

precautions should be observed, including

the following:

Read all instructions before using your

POWERbot.

Unplug from outlet when not in use and

before conducting maintenance.

WARNING

To reduce the risk of re, electric shock,

or injury:

General

• Use only as described in this manual.

• Do not operate POWERbot or Charger /

docking station if it has been damaged in

any way.

• If the vacuum cleaner is not working as it

should, has been dropped, damaged, left

outdoors, or dropped in water, return it to

a customer care center.

• Do not handle the Charger / docking

station or POWERbot with wet hands.

• Use only on dry, indoor surfaces.

• This appliance can be used by children

aged from 8 years and above and persons

with reduced physical, sensory or mental

capabilities or lack of experience and

knowledge if they have been given

supervision or instruction concerning

use of the appliance in a safe way and

understand the hazards involved.

• Children shall not play with the appliance.

Cleaning and user maintenance shall not

be made by children without supervision.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 3 2020-01-14 오후 9:59:32

English-4

Safety information

2-2

Battery charger / Docking station

• Do not modify the polarized plug to t a

non-polarized outlet or extension cord.

• Do not use outdoors or on wet surfaces.

• Unplug the Charger / docking station from

the outlet when not in use and before

servicing.

• Use only the Charger / docking station

supplied by the manufacturer to recharge.

• Do not use with a damaged cord or plug

or a loose power outlet.

• Do not pull or carry by the cord, use the

cord as a handle, close the door on the

cord, or pull the cord around sharp edges

or corners. Keep the cord away from

heated surfaces.

• Do not use extension cords or outlets with

inadequate current carrying capacity.

• Do not unplug by pulling on the cord. To

unplug, grasp the plug, not the cord.

• Do not mutilate or incinerate batteries as

they will explode at high temperatures.

• Do not attempt to open the Charger /

docking station. Repairs should only be

carried out by a qualied customer care

center.

• Do not expose the Charger / docking

station to high temperatures or allow

moisture or humidity of any kind to come

into contact with the charger / docking

station.

• COMMISSION REGULATION (EU)

2019/1782

Ecodesign requirements for external

power supplies : www.samsung.com/

global/ecodesign_component

POWERbot

• Do not pick up hard or sharp objects such

as glass, nails, screws, coins, and etc.

• Do not use without a lter in place. When

servicing the unit, never put ngers or

other objects into the fan chamber in case

the unit accidentally turns on.

• Do not put any objects into openings.

Do not use with any openings blocked;

keep openings free of dust, lint, hair, and

anything that may reduce air ow.

• Do not pick up toxic materials (chlorine

bleach, ammonia, drain cleaner, etc.).

• Do not pick up anything that is burning or

smoke, such as cigarettes, matches, or hot

ashes.

• Do not use to pick up ammable or

combustible liquids such as gasoline or

use in areas where they may be present.

Also do not use in:

– Locations with candles or desk lamps on

the oor.

– Locations with unattended res (re or

embers).

– Locations with distilled alcohol, thinner,

ashtrays with burning cigarettes, etc.

• Do not use POWERbot in an enclosed

space lled with vapours given off by oil

based paint, paint thinner, moth proong

substances, ammable dust, or other

explosive or toxic vapours.

• Leaks from battery cells can occur under

extreme usage or temperature conditions.

If the liquid gets on skin, wash quickly

with water. If the liquid gets into the

eyes, ush them immediately with clean

water for a minimum of 10 minutes. Seek

medical attention.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 4 2020-01-14 오후 9:59:33

English-5

Safety information

2-3

WARNING

Power related

• Please prevent any risk of electric shock

or re.

– Do not damage the power cord.

– Do not pull the power cord too hard or

touch the power plug with wet hands.

– Do not use a power source other than

100-240V~ and also do not use a

multi outlet to supply power to number

of devices at the same time. (Do not

leave the cord carelessly on the oor.)

– Do not use a damaged power plug,

power cord or loose power outlet.

• Clean dust or any foreign matters on the

pin and contact part of the power plug.

– There is a risk of electric shock or

malfunction.

Before use

• Do not use POWERbot near a heater or

combustible materials.

– Do not use POWERbot near re or ame

such as a movable heater, a candlelight,

a desk lamp, a replace etc. or in a place

where combustible materials such as

gasoline, alcohol, thinner etc. exist.

• Make sure there are no dangerous objects

around the POWERbot’s cleaning area to

prevent collision and unplug any electric

heaters or fans.

• The POWERbot is intended for household

use therefore do not use it in an attic,

basement, storage, industrial building,

out of indoor space, places with moisture

(such as bathroom, laundry), on the table

or shelves.

– The POWERbot can be damaged or

malfunction.

• Install the Virtual guard in front of

dangerous areas (such as stairs or railings)

to prevent damaging the product or

getting injured.

– For your safety, always keep the cliff

sensor clean.

• Be sure POWERbot does not pass through

or touch any kind of liquids.

– The POWERbot can be severely

damaged and it may contaminate other

areas if the wheels pass through liquid.

• Do not spill any liquids on the docking

station.

– There is a risk of re or electric shock.

• Do not use the docking station for

anything other than its intended purpose.

– There is a risk of re or severe damage

to the docking station.

• Always keep the cliff sensor clean for

your safety.

In use

• If any abnormal sounds, smells or smoke

come from POWERbot, immediately shut

off the emergency switch at the bottom of

POWERbot and contact a service center.

Cleaning and maintenance

• When power cord is damaged, contact

a service center to get it replaced by

certied repairman.

– There is a risk of re or electric shock.

• Please check with a Samsung Electronics

service center when exchanging batteries.

– Using batteries from other products can

cause malfunction.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 5 2020-01-14 오후 9:59:33

English-6

Safety information

2-4

CAUTION

Before use

• Insert the dustbin before using POWERbot.

• Open room doors before cleaning in order

to have all rooms cleaned and install

a Virtual guard in front of entryway,

balconies, bathrooms, or other areas

where POWERbot may fall.

• Be careful with the followings for proper

automatic recharging.

– Always turn on the power of the

docking station.

– Install the docking station where

POWERbot can easily nd.

– Do not leave any object in front of the

docking station.

• When installing the docking station, do

not leave the cord carelessly on the oor

since POWERbot may get tangled by it.

• Do not use POWERbot on black colored

oors.

– The POWERbot may not be able to

operate normally.

• Do not pick up POWERbot by the dustbin

holder.

• Do not place any objects within 0.5 m

to both sides and 1 m to the front of the

docking station.

• Make sure the docking station's charging

contact is not damaged or have any

foreign matters on it.

• Do not install the docking station in an

area with a dark oor.

– If the oor around the docking station is

dark, recharging is hindered.

• Move any obstacles that may disturb

POWERbot's movement (such as children's

indoor swing or slides) before cleaning.

In use

• Using POWERbot on thick carpet may

damage both POWERbot and the carpet.

– The POWERbot cannot pass over carpet

that is thicker than 1 cm.

• Do not use POWERbot on tables or other

high surfaces.

– There is a risk of damage if it falls.

• The POWERbot may bump into chair, desk

legs therefore move them away for faster

and efcient cleaning.

• When POWERbot is operating, do not lift

it up or carry it to another area.

• Do not hold by driving wheels of

POWERbot when carrying it to another

area.

• Do not put any objects on top of

POWERbot since it may cause malfunction.

• Remove any large papers or plastic bags

immediately when using POWERbot since

they may block the intake.

• Do not aim the red pointer directly at

people or animals.

Cleaning and maintenance

• Prevent any damage to POWERbot by

complying the followings.

– Do not clean POWERbot by spraying

water directly onto it or use benzene,

thinner, acetone or alcohol to clean it.

• Do not disassemble or repair POWERbot.

This should only be done by a certied

repairman.

• Always keep the obstacle sensor and cliff

sensor clean.

– If foreign matter accumulates, sensors

may malfunction.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 6 2020-01-14 오후 9:59:33

English-7

Charging

Please install the docking station in a place

where the oor is level and wall is straight.

How to turn on the emergency

switch

Hold the robot vacuum cleaner and turn

on the emergency switch without pressing

any buttons.

Check the charging status.

"" will turn on according to

charging progress and "FULL" will

turn on when charging is complete.

When the product is purchased, the battery is not charged, so charging must initially be done manually.

0.5 m 1 m

0.5 m

Make sure the

charge pins on the

robot vacuum cleaner

and the charger are

aligned.

Ensure the power

cord is arranged

neatly next to the

wall.

ÚInstall with the grain of wood oors.

Install the charger where the

robot vacuum cleaner can

easily nd it.

Charging lamp during charging

(green)

1_VR9300_Q_guide_EN_00743H-08_SB.indd 7 2020-01-14 오후 9:59:36

English-8

4-1

Using the robot vacuum cleaner

Starting Auto clean mode

The POWERbot moves and

automatically cleans the set areas

only once.

Stop cleaning:

Press and release the button

Starting Spot clean mode

Press and release this button.

The POWERbot cleans a localized

area intensely.

Recharging

You can command POWERbot to

recharge at the docking station

automatically while it is cleaning

by pressing this button.

Auto Clean Spot Clean

Spot clean mode can be selected

only by pressing this button on the

main body of the POWERbot.

Manual Clean

Manual clean mode can be selected

by the direction control buttons of

the remote control.

1_VR9300_Q_guide_EN_00743H-08_SB.indd 8 2020-01-14 오후 9:59:37

English-9

1. Power

Turn POWERbot's power on/off

2. Recharging

Select to recharge POWERbot at the docking station

automatically

3. Start/Stop

Select to start or stop cleaning process

4. Auto clean

Select to clean all set areas only once and then

automatically return to the docking station.

5. Max mode

Select to clean with the strongest suction power

6. Normal mode

Select to clean with moderate suction power

7. Quiet mode

Select to clean with lower operation noise

8. Schedule / Cancel(3sec)

Refer to page 10

9. Clock

Refer to page 10

10. Sound

Each time you press this button, Sound Effects Mute

is selected in this sequence

11. Smart control

Select to turn on or off the smart control

 Press [Sound] button for 3 seconds..

 Wi-Fi connection should be done to control the

POWERbot using SmartThings App.

Using the robot vacuum cleaner

4-2

7 6 5

8 9 10

3 4

1_VR9300_Q_guide_EN_00743H-08_SB.indd 9 2020-01-14 오후 9:59:38

Andere Handbücher für POWERbot SR20K9350W Series

Inhaltsverzeichnis

Sprachen:

Andere Samsung Staubsauger Handbücher

Samsung

Samsung VCDC12 Series Bedienungsanleitung

Samsung

Samsung SC6550 Bedienungsanleitung

Samsung

Samsung VAC-9048R Bedienungsanleitung

Samsung

Samsung SU33 SERIES Bedienungsanleitung

Samsung

Samsung SC07K41 Series Bedienungsanleitung

Samsung

Samsung POWERbot SR1 M70 Series Bedienungsanleitung

Samsung

Samsung SC74 SERIES Bedienungsanleitung

Samsung

Samsung VC-6814H Bedienungsanleitung

Samsung

Samsung VAC-5913VB Merkblatt

Samsung

Samsung SC44** Series Bedienungsanleitung

Samsung

Samsung POWERbot SR1 M70 Series Bedienungsanleitung

Samsung

Samsung SC7820 Bedienungsanleitung

Samsung

Samsung SC8200 Series Bedienungsanleitung

Samsung

Samsung VS15T70 Series Bedienungsanleitung

Samsung

Samsung SC11H4050V Series Bedienungsanleitung

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung POWERbot SR20J90 U Series Bedienungsanleitung

Samsung

Samsung Jet Bot Bedienungsanleitung

Samsung

Samsung VR20T6001M Series Bedienungsanleitung

Samsung

Samsung SC6300 SERIES Bedienungsanleitung

Samsung

Samsung SC20F30 Series Bedienungsanleitung

Samsung

Samsung VS20R90 Series Bedienungsanleitung

Samsung

Samsung VCC 8850H3R Bedienungsanleitung

Samsung

Samsung VC-U366 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch