Samsung VAC-5913VB Merkblatt

Operating lnstructions

For household use only

Models

VAC-5900 SERIES

VACUUM CLEANER

Before operating this unit, please read the instructions carefully.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the

following:

WARNING

To reduce the risk of fire, electric shock, or injury:

1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not allow to be used as a toy. Close attention is necessary when used by or near children.

4. Use only as described in this manual. Use only manufacturer’s recommended attachments.

5. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped,

damaged, left out door, or dropped into water, return it to a service center.

6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp

edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

7. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

8. Do not handle plug or appliance with wet hands.

9. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint,

hair and anything that may reduce air flow.

10. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

11. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

12. Do not use without dust bag and filters in place.

13. Turn off all controls before unplugging.

14. Use extra care when cleaning on stairs.

15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where

they may be present.

16. Store your cleaner indoors in a cool dry area.

17. Do not use extension cords or outlet with inadequate current carrying capacity.

18. Unplug electrical appliances before vacuuming them.

19. Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.

SAVE THESE INSTRUCTIONS

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the

other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not

change the plug in any way.

READ ALL INSTRUCTIONS BEFORE USING THIS

VACUUM CLEANER.

IDENTIFICATIONS OF PARTS

Features marked *may vary according to model.



HANDLE

AIR REGULATOR

FLOOR NOZZLE* RUG/FLOOR SELECTOR

CLAMPER FOR

DUST BAG COM-

PARTMENT

POWER CONTROL

SWITCH* & ON/OFF

SWITCH

DUST-FULL INDI-

CATOR

SUCTION HOSE

BUTTON FOR

SUCTION HOSE

REMOVAL

CARRYING HAN-

DLE & CORD

REWIND BUTTON

TUBE*

CYCLONIC FILTER*

*BELT-STRAP ASSY CREVICE-TOOL

HANGER ACCESSORY DUSTING BRUSH

NOTE : When removing the power cord from the electrical outlet, grasp the plug, not the cord.

NOTE : For your convenience, the handle has two functions. It can be used as a “handle” to carry

the unit. It is also the cord rewind button that can be used to rewind the power cord.

POWER CORD

1) PULLING OUT

The power cord is long enough to be drawn

out for convenience.

2) REWINDING

When you have finished cleaning, disconnect

the plug from the electrical outlet and simply

press the cord rewind button lightly with your

toe.

ASSEMBLING THE VACUUM-CLEANER READY FOR USE

1) Connect the suction hose to the suction

tube. 2) Connect the suction tubes together (depend-

ing on model).

4) Grip the body connector with one hand and

squeeze the tube in an inward direction.

* Option

➀

Assemble the CYCLONIC FILTER with the handle

and extension wand(depending on model).

➁

Ajusting the telescopic tubes (depending on model).

3) Connect the nozzle to the suction tube.

*OPTION➁

EXTENDING : Holding narrow

side of the telescopic tube with a

hand, pull the hadle to the oppo-

site side of it with another hand.

SHORTENING : Push the han-

dle to the narrow side

of the tube, hoding

it with another

hand.

*OPTION➀

NOTE : ON/OFF switch is combined with POWER

CONTROLLER - To start or stop the unit

just lightly press it downward.

ON/OFF SWITCH

With the cord plugged into an electrical outlet, start or

stop the vacuum cleaner by pushing lightly downward

on the switch.

NOTE : If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag,

turn the cleaner off and check whether the hose, tube or nozzle is clogged.

If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires

replacement.

POWER CONTROL(VARIABLE CONTROL TYPE ONLY)

The vacuuming power can be adjusted to suit any situa-

tion with the electrical power control.

MIN = For delicate fabrics, e.g.net curtains.

MAX = For hard floors and heavily soiled carpets.

-To adjust power output just turn it right or left.

USING THE ACCESSORIES

DUST-FULL INDICATOR

CREVICE DUSTING

Crevice tool for radiators,

crevices, corners, between cush-

ions.

Dusting brush for furniture,

shelves, books, etc. •

Before use, assemble the dusting

brush to the crevice tool

TOOL STORAGE

Your cleaner features a tool storage device.

Assemble the accessory hanger on to the extension tube.

It can be used to store the cleaning tools while they are not in use.

This tool can be separated into two parts.

PARK POSITION

TRANSPORTING AND STORING THE VACUUM CLEANER

Located on the top rear side of the vacuum-clean-

er, there is a nozzle support that can be used to

park the nozzle during pauses in cleaning.

For easy storage and transportation, this vacuum cleaner has a clip

system built onto the body, which will keep the tube, hose and noz-

zle in a vertical position.

Ready for use



1) Insert the lockers into the holes on the cleaner, taking

care of the lockers’ direction.

Strap-ends should face the body of the cleaner.

2) Pull the lockers to the front of the cleaner until they

click into place.

3) Adjust the strap length to fit your body.

When not using the strap



- Detach the lockers by pushing them down and drawing them

out from the unit.

Keep the strap separately for the next time you want to use it

USING & ASSEMBLING THE STRAP

(OPTIONAL)

This appliance is designed to be conveniently carried

on your waist using the belt-strap accessory.

When cleaning steps, curtains, shelves, etc, you can

carry the unit with the strap over your shoulder.

2) 3)

Locker

REPLACING THE DUST BAG

1) To open the dust cover of the dust bag compart-

ment, press the clamper upwards.(The clamper is

located at the front of the dust cover)

2) Remove the dust bag from the cleaner.

MAINTENANCE OR REPLACEMENT OF THE FILTERS

INLET FILTER

To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust

compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage may

result. After cleaning the secondary filter attach it in place.



SECONDARY FILTER SECONDARY FILTER

OUTLET FILTER



NOTE: The filters must be completely dried before being replaced in the dust compartment.

1) Open the grille part, separate the exhausted fil-

ter. 2) Reassemble it after cleaning or replacing the fil-

ter in the reverse order.

3) After removing the used dust bag, insert the card-

board bag collar of the new dust bag into its origi-

nal position.

4) Press the dust cover down gently until the clam-

per relocks.

USAGE OF FLOOR NOZZLE

Select the carpet indicator ➀when cleaning carpets.

Select flat surface indicator ➁when cleaning the floors, tiles, etc.

FOR RUG / FLOOR SELECTOR

Before use make sure that the position of the selector is in the right position for the type of surface to be

cleaned.

FOR UNIVERSAL BRUSH

Use the floor nozzle for cleaning all surfaces.

You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it main-

tain the maximum cleaning efficiency.

The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and

dust revolves in the Cyclonic Filter. So the dust bag contains only smaller ones.

When the Dust Barrel is filled with dust up to the indicating line, it needs disposing and cleaning.

Dust Barrel can be cleaned in water.

CYCLONIC FILTER(ONLY CYCLONIC FILTER TYPES)

1.Turn the Dust Barrel to the left and pull it.

2.Disconnect the Cyclonic Filter from extension wand and handle.

3.Remove thread and hair tangled around the net.

4.After cleaning the Dust Barrel and Cyclonic Filter,connect the Cyclonic Filter with extension

wand and handle(washed part should be dried in the shade throughly before assembling).

5.Push and turn the Dust Barrel to the right.

Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter.

CREVICE

TOOL

CYCLONIC

FILTER

DUST BARREL

TROUBLE SHOOTING

NOTE: For optimum efficiency, clean floor brush with crevice tool.

PROBLEM CAUSE REMEDY

Motor does not start No voltage Check cable, plug and socket.

Suction force is gradually Filter, nozzle, suction hose or Remove the obstruction

reduced tube is blocked,or bag full. or replace bag.

Cord does not rewind fully Check that the cord is Pull the cord out 6~10ft & push

not twisted or wound unevenly down the Cord Rewind button.

CODE-NO:DJ68-00068U REV(0.1)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Staubsauger Handbücher

Samsung

Samsung SC7030 Bedienungsanleitung

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung SC9150 Bedienungsanleitung

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung SC07M21 Series Bedienungsanleitung

Samsung

Samsung SS60K60 Series Bedienungsanleitung

Samsung

Samsung SC4130 Bedienungsanleitung

Samsung

Samsung VCC 8850H3R Bedienungsanleitung

Samsung

Samsung VC-6714H Bedienungsanleitung

Samsung

Samsung VAC-7049B Bedienungsanleitung

Samsung

Samsung SC54Q0 Bedienungsanleitung

Samsung

Samsung SU12F40 SERIES Bedienungsanleitung

Samsung

Samsung VAC-9069G Bedienungsanleitung

Samsung

Samsung VR20T6001M Series Bedienungsanleitung

Samsung

Samsung VC-6813V Bedienungsanleitung

Samsung

Samsung VC-8918V Bedienungsanleitung

Samsung

Samsung VC-5814H Bedienungsanleitung

Samsung

Samsung POWERbot VR AM70 Series Bedienungsanleitung

Samsung

Samsung VC-8726HT Bedienungsanleitung

Samsung

Samsung DJ68 Bedienungsanleitung

Samsung

Samsung SC8571 Bedienungsanleitung

Samsung

Samsung VS20C85 Series Bedienungsanleitung

Samsung

Samsung VCJG Series Bedienungsanleitung

Samsung

Samsung POWERbot SR1 M70 Series Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung