Samsung VC-7616VN Bedienungsanleitung

Operating Instructions

VACUUM CLEANER

❈Before operating this unit, please read the instructions carefully.

DJ68-00085S(0.0) 8/20/02 1:33 PM Page 1

This appliance must be connected to the same mains voltage as shown on

the rating plate.

This vacuum cleaner is not suitable for removing any kind of liquid.

Carpets treated with a liquid cleaner must be allowed to dry before being

cleaned with the unit.

Never operate the vacuum cleaner without a dust bag.

The cover cannot be closed if a dust bag is not inserted. Please do not close

forcibly.

Keep children away from this vacuum cleaner. It must not be used on people

or animals.

Never use your appliance to vacuum matches, glowing embers, or

cigarette-ends. Avoid vacuuming hard, pointed objects, since they may

damage the appliance or dust bag.

If your vacuum cleaner has a fault, please contact your electrical retailer or an

authorized service agent.

If the supply cord is damaged, it must be replaced by the manufacturer or its

service agent or a similarly qualified person in order to avoid a hazard.

Once you have unpacked the unit, do not simply throw the packing into the

household waste.

Take them to the appropriate collecting points for recycling.

IMPORTANT SAFEGUARDS

PROTECTING THE ENVIRONMENT

▲▲▲▲▲▲▲▲▲▲▲

DJ68-00085S(0.0) 8/20/02 1:33 PM Page 2

IDENTIFICATIONS OF PARTS

ASSEMBLING THE VACUUM - CLEANER READY FOR USE

1) Connect the suction hose to the

cyclone filter. 2) Connect the cyclone filter to the suction

tube.

3) Connect the suction tubes together

(depending on model).

4) Connect the nozzle to the suction tube. 5) Connect the body connector to the body

of the cleaner.

OPTION : Adjusting the telescopic

tube(depending on model).

▲

Features marked with

* may vary according to model.

DJ68-00085S(0.0) 8/20/02 1:33 PM Page 3

POWER CORD

ON / OFF SWITCH

POWER CONTROL (VARIABLE CONTROL TYPE ONLY)

1) PULLING OUT

The power cord is long enough to be

drawn out for convenience.

2) REWINDING

When you have finished cleaning,

disconnect the plug from the electri-

cal outlet and simply press the cord

rewind button lightly with your toe.

With the cord plugged into an electrical

outlet, start or stop the vacuum cleaner

by pushing lightly downward on the

switch with your toe.

The vacuuming power can be adjusted

to suit any situation with the electrical

power control.

MIN = For delicate fabrics, e.g.net

curtains.

MAX = For hard floors and heavily

soiled carpets.

NOTE: When removing the power cord from the electrical outlet, grasp the

plug, not the cord.

DJ68-00085S(0.0) 8/20/02 1:33 PM Page 4

NOTE: If the “Dust-Full” indicator continues to display “RED” even after

changing the dust bag, turn the cleaner off and check whether the

hose, tube or nozzle is clogged.

DUST-FULL INDICATOR

USING THE ACCESSORIES

USING THE BLOWER

If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust

bag requires replacement.

Pull the tool storage cover upward.

• Crevice tool for radiators, crevice,

corners, between cushions.

• Upholstery brush for cushions and

drapery.

• Dusting brush for furniture, shelves,

books, etc.

Located on the left rear side of the

cleaner.

1) Disconnect the hose from the body

of the

cleaner.

2) Connect the hose clamper to the

blow hole.

DUSTING BRUSH

CREVICE TOOL

UPHOLSTERY

BRUSH

CREVICE DUSTING

UPHOLSTERY

DJ68-00085S(0.0) 8/20/02 1:33 PM Page 5

CYCLONIC FILTER(ONLY CYCLONIC FILTER TYPES)

You can use a dust bag in your cleaner for a long time thanks to the Cyclonic

Filter system and it maintain the maximum cleaning efficiency.

The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel

when suctioned air and dust revolves in the Cyclonic Filter. So the dust bag

contains only smaller ones.

When the Dust Barrel is filled with dust up to the indicating line, it needs dispos-

ing and cleaning.

Dust Barrel can be cleaned in water.

1. Turn the Dust Barrel to the left and pull it.

2. Disconnect the Cyclonic Filter from extension wand and handle.

3. Remove thread and hair tangled around the net.

4. After cleaning the Dust Barrel and Cyclonic Filter,connect the Cyclonic Filter

with extension wand and handle(washed part should be dried in the shade

throughly before assembling).

5. Push and turn the Dust Barrel to the right.

Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter.

REPLACING THE DUST BAG

1) To open the dust cover of the dust

bag compartment, press the

clamper upward.

(The clamper is located at the front

of the dust cover)

2) Remove the carrying bag from the

cleaner.

CREVICE TOOL

CYCLONIC

FILTER

DUST BARREL

DJ68-00085S(0.0) 8/20/02 1:33 PM Page 6

FOR CLOTH FILTER BAG

MAINTENANCE OR REPLACEMENT OF THE FILTERS

NOTE: Used dust bag can be sealed

by removing the film from the

paper and sticking the latter

over the suction opening.

(ONLY PAPER BAG)

After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use

it again.

1) INLET-FILTER.

• Open the dust cover.

• After detaching the filter, shake off the dust, and

then insert it in its original position.

• Close the dust cover.

2) OUTLET-FILTER.

• Open the dust cover, and then pull grille-filter

forward.

• Remove and replace the exhausted outlet-filter.

• Push the grille filter, and then close the dust

cover.

After removing the used dust bag,

insert the cardboard bag collar of the

new dust bag into the carrying bag,

and then insert it in its original position

4) Press the dust cover down gently

until the clamper relocks.

DJ68-00085S(0.0) 8/20/02 1:33 PM Page 7

USAGE OF FLOOR NOZZLE

FOR RUG / FLOOR SELECTOR

Before use make sure that the position of the selector is in the right position for

the type of surface to be cleaned.

Select the carpet indicator ➀when cleaning carpets.

Select flat surface indicator ➁when cleaning the floors, tiles, etc.

NOTE: For optimum efficiency, clean floor brush with crevice tool.

TROUBLE SHOOTING

PROBLEM CAUSE REMEDY

Motor does not start. No power supply. Check cable, plug and

socket.

Suction force is gradually Filter, nozzle, suction hose Remove the object.

decreasing. or tube is blocked.

Cord does not rewind fully. Check that the cord is not Pull the cord out 2~3m &

twisted or wound unevenly. push down the cord rewind

button.

DJ68-00085S REV (0.0)

DJ68-00085S(0.0) 8/20/02 1:33 PM Page 8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Staubsauger Handbücher

Samsung

Samsung VCDC12 Series Bedienungsanleitung

Samsung

Samsung VS20A95823W Bedienungsanleitung

Samsung

Samsung SS60M60 Series Bedienungsanleitung

Samsung

Samsung SC4020 Bedienungsanleitung

Samsung

Samsung VR20T6001M Series Bedienungsanleitung

Samsung

Samsung VR05R50 Series Bedienungsanleitung

Samsung

Samsung DJ68-00339U Bedienungsanleitung

Samsung

Samsung SC45 Series Bedienungsanleitung

Samsung

Samsung VS20C95 Series Bedienungsanleitung

Samsung

Samsung SR8730 Bedienungsanleitung

Samsung

Samsung SC8461 Bedienungsanleitung

Samsung

Samsung SR20H9050U Bedienungsanleitung

Samsung

Samsung SC8800 series Bedienungsanleitung

Samsung

Samsung SR8848 Bedienungsanleitung

Samsung

Samsung SC07H40**V SERIES Bedienungsanleitung

Samsung

Samsung POWERbot VR20R72 Series Bedienungsanleitung

Samsung

Samsung POWERbot SR20K9350W Series Bedienungsanleitung

Samsung

Samsung SC8150 Bedienungsanleitung

Samsung

Samsung VR05R50 Series Bedienungsanleitung

Samsung

Samsung VR30T80 Series Bedienungsanleitung

Samsung

Samsung SC74 SERIES Bedienungsanleitung

Samsung

Samsung SC88P Series Bedienungsanleitung

Samsung

Samsung Vacuum cleaner Bedienungsanleitung

Samsung

Samsung SC20F70 Series Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch