Samsung VC-RA84V Series Bedienungsanleitung

DJ68-00517A REV(0.7)

Operation manual

Manufacturer: 271 Oseon dong, Gwangsan gu, Gwangju metropolitan city

Customer consultation office

02-541-3000, 080-022-3000

Representative telephone number of the customer care center:

Anywhere in this country 1588-3366

When accurately informed the model name of product, state of failure, and contact address, any

anxieties of customer will always be kindly consulted and rapid service will be provided.

Home page of the customer care center: www.samsungsvc.co.kr

The cyber service center, in which reception of service and real time cyber consultation at the date

and time exactly desired by customer can be realized, is operated.

Internet home page

http://www.sec.co.kr

■Address: 271 Oseon dong, Gwangsan gu, Gwangju metropolitan city

■Manufacturer: Samsung Gwangju Electronics Inc.

DJ68-00517A-고급형(EN).indd 1 2010.5.6 1:30:59 PM

Precautions for safety are the contents to secure the

safety of user and to prevent damage of property etc.

Please read carefully to have proper use of the

product.

※ This product has been made to be used in Korea, and the

quality will not be guaranteed in overseas countries.

(FOR KOREA UNIT STANDARD ONLY)

VC-RA84V* SERIES

VC-RL84V* SERIES

Operation manual

Manufacturer: 271 Oseon dong, Gwangsan gu, Gwangju metropolitan city

Robotic vacuum cleaner

Operation manual of the product

DJ68-00517A-고급형(EN).indd 2 2010.5.6 1:31:0 PM

Every day cleaning mode

Automatic cleaning will

be conducted at the

same time of every day.

The cleaning zone of the robotic vacuum cleaner can be

restricted with the fence (virtual wall) mode or several spaces

can be cleaned with gate keeper (virtual door) mode.

※ In this text hereafter, Samsung i (eye)- keeper will be expressed as the i - keeper.

Convenient Samsung i (eye)- keeper function

As the cleaning is conducted by following the lattice

pattern ( ) with the ceiling image recognition method,

cleaning can be performed for every part of the room.

Various cleaning modes are provided in accordance

with the cleaning circumstances.

Diverse cleaning mode

As another dust discharging port is provided at the

upper section, the dust bin can easily be emptied by

general vacuum cleaner without flying of the dust.

Simple dust discharging function

MON

TUE

WED

THU

FRI

SAT

SUN

Features and advantages

of product

What is the ceiling image

recognition (Visionary

Mapping TM) method?

As the product moves with its

own judgment on the place

to clean after recognizing the

image of ceiling with the

camera located at the upper

section, every part of the

room can be cleaned.

Realizing fine and uniform cleaning for every part of the room

Manual cleaning mode

Perform the cleaning

by directly moving the

cleaner with remote

controller.

Reserved cleaning mode

Reserve the cleaning

at desired time when

going out

Partial cleaning mode

Perform the cleaning of

partial area or when

being scattered of small

fragments of cookies etc.

Automatic

cleaning mode

Perform uniform and

convenient cleaning for

every room.

Repeated

cleaning mode

Perform repeated

cleaning until battery is

exhausted.

DJ68-00517A-고급형(EN).indd 2 2010.5.6 1:31:9 PM

Approx. 1.5 cm of threshold can be traveled with special

driving system, therefore, all the rooms can evenly be

cleaned. However, for the sake of safety, the threshold of

more than 1.5 cm can not be crossed.

Threshold traveling

Dust of every corner can be neatly cleaned by approaching to

the corner as much as possible through the minimizing of

colliding impact as the velocity is reduced by 7 obstacle sensors

when encountering with obstacle and through the relieving of the

colliding impact by 2 bumper sensors during the cleaning. (The

obstacle sensor displays higher sensitivity against bright obstacle.)

▌Soft bumping

Falling will be prevented by the 3 falling prevention

sensors through the detection of falling danger areas

such as stairway, porch, entrance door, etc.

Falling prevention

If lifting the robotic vacuum cleaner while it is in operation,

the motions of driving wheel,

power brush, suction motor, and side rotating brush will

be stopped due to the detection of the sensor.

Safety device

When the remaining amount of battery is not sufficient, the

charger induces the robotic vacuum cleaner, therefore,

rapid and accurate automatic charging can be performed.

Automatic charging

Dust is removed by the rotation of dual side brushes.

Dual side rotating brush

회회회

Features and advantages

of product

DJ68-00517A-고급형(EN).indd 3 2010.5.6 1:31:16 PM

회회

Preparation

회회

Installation

회회

Operation

Features and advantages of product ............................. 2

Precautions for safety ............................................................ 5

Items related with the power supply ..................................... 5

Before the use .............................................................................. 6

During the use .............................................................................. 9

Handling after the use ............................................................. 10

Components .............................................................................. 11

Name of each section .......................................................... 12

Main frame .................................................................................. 12

Charger ........................................................................................ 13

i-keeper ........................................................................................ 13

Remote controller ...................................................................... 14

State indicating screen ............................................................. 15

Emergency switch ON/OFF ................................................... 16

Installation of the charger ........................................................ 17

Electric charging ........................................................................ 18

Important items for battery ....................................................... 19

Setting of time .............................................................................. 20

Installation of entry prevention tape(Exclusive use for VCRA84V* SERIES)

............. 21

Installation of i-keeper ............................................................. 22

Cleaning start/stop .................................................................... 24

Returning to electric charging ................................................ 25

Automatic cleaning .................................................................... 26

Partial cleaning ........................................................................... 27

Repeated cleaning .................................................................... 28

Manual cleaning ........................................................................ 29

Reserved cleaning .................................................................... 30

Daily reservation ........................................................................ 31

Additional functions ................................................................... 32

Precautions before the handling ........................................... 33

Handling of sensor window and camera ........................... 33

Simple emptying of dust ......................................................... 34

Handling of dust bin and HEPA-filter .................................. 34

Handling of power brush ........................................................ 36

Handling of side rotating brush ............................................. 37

Handling of driving wheel ....................................................... 38

Confirming items before reporting the failure ............. 39

Corrective measures for each inspection code ................ 41

Specification of product ....................................................... 42

Disposal guidance of waster electronic product ............... 44

Handling

Others

Contents

DJ68-00517A-고급형(EN).indd 4 2010.5.6 1:31:17 PM

회회 회회

Precautions for safety

preparation

These are the contents to secure the safety of user and to prevent damage of property.

Please have safe operation by reading carefully of the following items.

Always observe followings for

safety

If caution items are not being observed, wound or

property damage can be occurred to the user.

This product is used 220V as the rated voltage.

If warning items are not being observed, death or serious

wound can be occurred to the user.

Corresponding terminology will be

explained to improve the understanding for

the product operation.

This is the disassembly prohibited

indication. Refer to the corresponding page.

Contents with which more efficient

use of the product can be realized

will be explained.

Items related with the power supply

Do not impair the power

supply cord by excessively

bending it or pressing it

down with heavy object.

▶ There is the danger of

electric shock or fire.

If dust, water etc. are

adhered to the pin and

contact section of the power

supply plug, thoroughly

clean them.

▶ There is the danger of

abnormal operation and

electric shock.

Do not pull the power

supply cord section or

touch the power supply

plug with wet hand.

▶ There is the danger of

electric shock or fire.

Do not use the power

source other than 220V or

do not connect several

electric products

simultaneously to one

outlet. (Do not expose the

cord line on the floor.)

▶ There is the danger of electric shock or fire.

Do not use damaged

power supply plug,

power supply cord, or

loosened outlet.

▶ There is the danger of

electric shock or fire.

DJ68-00517A-고급형(EN).indd 5 2010.5.6 1:31:23 PM

회회회회 회

These are the contents to secure the safety of user and to prevent damage of property.

Please have safe operation by reading carefully of the following items.

Always observe followings for

safety

Precautions for safety

preparation

Confirm whether dust

bin is assembled before

operating the robotic

vacuum cleaner.

▶ If dust bin is not

assembled, the robotic

vacuum cleaner will not

be operated.

Never use the robotic vacuum cleaner at the

following locations as it is a household

appliance.

▶ Critical damage (malfunction, breakage) can be

occurred to the product if it is used at the attic,

basement, warehouse, industrial building, separate

space away from indoors, locations where water is

always existed such as bathroom, laundry room etc.,

and narrow and elevated locations such as table,

shelves etc.

▶ At the location where candle or light stand

for desk are placed on the floor.

▶ At the location without people where light is

existed or fireplace is lighted.

▶ At the location where inflammables such as

gasoline, distilled alcohol, thinner, and

ashtray with lighted cigarette etc. are placed.

Never operate the

cleaner at the

location where

inflammable is

placed.

▶ If dust is accumulated at the falling prevention

sensor window, falling may be happened as

the falling danger zone can not be identified by

the robotic vacuum cleaner.

▶ If falling, injury or damage to the product can

be happened.

Attach entry prevention

tape to railing or

stairway entrance etc.

where falling danger is

existed. (Exclusive use

for VC-RA84V*SERIES)

In order to have cleaning of all of the

rooms, open the doors of rooms before

the cleaning.

▶ If the door of room is closed, the robotic

vacuum cleaner can not enter the room.

▶ However, always close the doors of entrance,

veranda, and rest room etc., through which

the robotic vacuum cleaner can be dropped.

▶ Attach to the zone with the difference of height

of less than 5 cm from the floor.

Example) Entrances of veranda, rest room, low

staircase, and porch etc.

▶ Attach to the fire zone (fireplace, heater, and

candle etc.) or danger zone with moisture.

▶ As entering may be happened in accordance

with the condition of floor surface, close the

doors of rest room, veranda, and porch etc.,

during the cleaning.

Always attach entry

prevention tape to the

zone into which the

robotic vacuum cleaner

can not be entered.

▶ Other place can be contaminated through

the liquid adhered to the wheel.

Be careful not to make

the robotic vacuum

cleaner to be passing

through or sucking in

water, oil, and liquid of

excrement of pet etc.

▶ Fatal damage can be

inflicted on the product.

Before the use

Entry prevention tape

Less than approx. 5cm

Attach in front

of approx. 5 cm

Entry

prevention

tape

DJ68-00517A-고급형(EN).indd 6 2010.5.6 1:31:30 PM

In the case of the carpet

with long tassel at the

end, fold the end section

to the inside.

▶ Fatal damage can be

inflicted on carpet and

robotic vacuum cleaner

by being wound to

driving wheel and

power brush.

Precautions for safety

preparation

▶ By all means, remove those products of

breakable ceramic ware or glass, and light

flowerpot etc.

▶ The robotic vacuum cleaner does not identify

coin, ring, or expensive jewelry etc.

Remove in advance

small or breakable

object at the location of

cleaning.

▶ Always remove these

prior to the cleaning.

▶ The robotic vacuum cleaner is supposed

to detect obstacles separated with the

distance of approx. 5 cm.

▶ Thin towel, pad, power supply cord, table

cloth, and belt etc., in front of the

bathroom, sink stand, entrance door, and

multipurpose room etc. can be tangled

with driving wheel or power brush, or can

be the cause of dropping objects on the

table or dinner table.

Put away those

objects scattered on

the floor.

Before the cleaning or

after establishing the

reserved cleaning

function, let all the

persons in the house to

be careful about these

by informing them.

▶ Children can be caught

and fallen by mistake

while they are running.

Never let children

standing or sitting on the

product while it is in

operation.

▶ Through the falling by

mistake, injury can be

inflicted or fatal damage

can be occurred to the

product.

▶ The robotic vacuum cleaner can be the object

of curiosity of child or pet.

▶ Injury can be inflicted if hand, feet, end of

clothes, and hair etc. are caught in the driving

wheel, side rotating brush, and power brush

during the cleaning.

▶ If the robotic vacuum cleaner is interrupted

while being followed along the path, the

particular section may not be cleaned as it is

being recognized as obstacle.

▶ In the case when emergency switch is turned

off, all functions and power supply will be

intercepted.

If child or pet is left

alone, turn off the

emergency switch of

the robotic vacuum

cleaner.

DJ68-00517A-고급형(EN).indd 7 2010.5.6 1:31:34 PM

Precautions for safety

preparation

When installing the charger,

do not expose the power

supply cord on the floor.

▶ During the automatic

electric charging or the

passing in front of the

charger, the robotic

vacuum cleaner can be

moved while drawing the

power supply cord.

Always insert the power

supply plug of the

charger.

▶ If power is not

supplied, automatic

electric charging can

not be performed.

Remove the obstacles

located in the vicinity

of approx. 1m in front

of and approx. 0.5m

at left and right side

of the charger.

Do not make short the

terminal of charger

with metals such as

chopsticks, driver etc.

▶ Fatal damage can

be inflicted on the

charger.

For the space with the

height less than that of

the robotic vacuum

cleaner (low sofa,

underneath of low bed

etc.), entry may

attempted or jamming

can be occurred,

therefore, attach the

entry prevention tape.

Install the charger at the

location where it can be

discovered easily.

▶ If installing it at

recessed area,

automatic electric

charging will be difficult

due to the excessive

unnecessary motions.

If an object is placed in

front of the charger,

automatic electric

charging can not be

performed by the robotic

vacuum cleaner.

▶ Take away the object.

Be careful not to have

the inflow of liquids

such as water, juice

etc. on the charger.

▶ There will be the

danger of electric

shock or fire.

Do not use the charger for another

application.

▶ There will be the danger of fire or

fatal damage to the charger.

These are the contents to secure the safety of user and to prevent damage of property.

Please have safe operation by reading carefully of the following items.

Always observe followings for

safety

DJ68-00517A-고급형(EN).indd 8 2010.5.6 1:31:42 PM

회회회

During the use

Precautions for safety

preparation

The robotic vacuum

cleaner shall not be

used on thick carpet.

▶ This can be the cause

of failure of the robotic

vacuum cleaner.

▶ The carpet may be

damaged by this.

Do not use the robotic

vacuum cleaner on

the table or on

elevated place.

▶ If it is fallen, there

will be the danger

of damage.

During the movements

of the robotic vacuum

cleaner, it can be

collided with leg of

chair, leg of desk, table

chair, or thin and long

furniture etc.

▶ For the sake of fast and tidy cleaning,

put the table chair etc. on the table.

During the cleaning of

the robotic vacuum

cleaner, its traveling can

be interrupted by being

caught to the threshold

of entrance door and of

veranda etc.

▶ If the driving wheel of the robotic vacuum

cleaner is not rotated for more than 5 minutes,

all the functions will be suspended and the

movement will be stopped.

▶ In order to have the movement again, after

turning off the emergency switch and moving

the robotic vacuum cleaner to the movable

location by lifting it, turn on the power supply,

and then, perform the cleaning.

Do not put objects on

the robotic vacuum

cleaner.

▶ Malfunction can be

generated.

If sucking in wide paper

or vinyl bag during the

cleaning, remove them

immediately.

▶ If using the appliance

for long time with the

blocked state of the

inlet, fatal damage can

be inflicted on the

product.

If abnormal noise, odor,

or smoke is generated

from the robotic vacuum

cleaner, turn off the

emergency switch

immediately and call the

customer care center.

Perfect cleaning can not be

realized for the recessed

corner or the space

between sofa and wall etc.

which can not be accessed

by the robotic vacuum

cleaner.

▶ Clean them separately from

time to time.

During the cleaning by the robotic

vacuum cleaner, the phenomenon of

having a lump of dust remained on the

floor may be happened due to the failure

of inhaling it.

▶ Sweep it with another cleaning device.

DJ68-00517A-고급형(EN).indd 9 2010.5.6 1:32:3 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Staubsauger Handbücher

Samsung

Samsung SC7830 Bedienungsanleitung

Samsung

Samsung VAS-2698N Bedienungsanleitung

Samsung

Samsung VS15A60 Series Bedienungsanleitung

Samsung

Samsung POWERbot SR2AK9350W Series Bedienungsanleitung

Samsung

Samsung Jet Bot VR30T80 Series Bedienungsanleitung

Samsung

Samsung VCMA15 Series Bedienungsanleitung

Samsung

Samsung VS20B75 Series Bedienungsanleitung

Samsung

Samsung SS6AK6050KW Series Bedienungsanleitung

Samsung

Samsung SR8874 Bedienungsanleitung

Samsung

Samsung SC06H70x0H Series Bedienungsanleitung

Samsung

Samsung SC4137 Bedienungsanleitung

Samsung

Samsung SU10H30 SERIES Bedienungsanleitung

Samsung

Samsung VCC88B0H1K Bedienungsanleitung

Samsung

Samsung SR8730 Bedienungsanleitung

Samsung

Samsung SC47F1 Bedienungsanleitung

Samsung

Samsung SC88P Series Bedienungsanleitung

Samsung

Samsung VC-7114H Bedienungsanleitung

Samsung

Samsung SC8200 Series Bedienungsanleitung

Samsung

Samsung SU3486 Bedienungsanleitung

Samsung

Samsung SS7555 Bedienungsanleitung

Samsung

Samsung VC-8615EN Bedienungsanleitung

Samsung

Samsung SC07F50 series Bedienungsanleitung

Samsung

Samsung SC5450 Bedienungsanleitung

Samsung

Samsung VS20A95 Series Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch