Sanitaire 600 Series Bedienungsanleitung

Index

Important Safeguards ........................ 2

Service Information ............................ 4

Assemble ........................................ 5-6

Use..................................................... 7

Dust Bag ............................................ 8

Brush Roll Belt ................................... 9

Brush Roll ........................................ 10

Headlight .......................................... 10

Warranty...................................... 11-12

For location of nearest Eureka

Warranty Station or service

information call

1-800-282-2886*.

*En Mexico llame al 5670-6169

Upright

Vacuum Cleaner

Household Type

Owner’s Guide

600 Series

www.eureka.com

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed,

including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

WARNING

To reduce the risk of fire, electric shock or injury:

•Do not use outdoors or on wet surfaces.

•Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug

the electrical cord when not in use and before servicing.

•Do not allow to be used as a toy. Close attention is necessary when used by or

near children.

•Use only as described in this manual. Use only manufacturer’s recommended

attachments.

•Do not use with damaged cord or plug. If vacuum cleaner is not working as it

should, has been dropped, damaged, left outdoors, or dropped into water, return it

to a service center before using.

•Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord

around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord

away from heated surfaces.

•Do not use extension cords or outlets with inadequate current carrying capacity.

•Turn off all controls before unplugging.

•Do not unplug by pulling on cord.To unplug, grasp the plug, not the cord.

•Do not handle plug or vacuum cleaner with wet hands.

•Do not put any object into openings. Do not use with any opening blocked; keep

free of dust, lint, hair, and anything that may reduce airflow.

•This vacuum cleaner creates suction and contains a revolving brush roll. Keep

hair, loose clothing, fingers, and all parts of body away from openings and moving

parts.

•Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

•Do not use without dust bag in place.

•Belt pulleys can become hot during normal use.To prevent burns, avoid touching

the belt pulley when servicing the drive belt.

•Use extra care when cleaning on stairs.

•Do not use to pick up flammable or combustible liquids such as gasoline, or use in

areas where they may be present.

•Store your cleaner indoors in a cool, dry area.

•Keep your work area well lighted.

•Unplug electrical appliances before vacuuming them.

SAVETHESE INSTRUCTIONS

CONSEILS DE SÉCURITÉ

Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent

être observées, incluant les suivantes:

LISEZ TOUTES LES INSTRUCTIONS AVANT D’UTILISER VOTRE ASPIRATEUR.

AVERTISSEMENT

Pour réduire le risque de feu, de choc électrique, ou de blessure:

•Ne pas utiliser à l’extérieur ou sur des surfaces mouillées.

•Fermez le commutateur et débranchez l’appareil lorsque vous ne l’utilisez pas ou

avant le nettoyage ou l’entretien.

•Nepermettezpasqu’ilsoit utilisécommejouet.Uneattentionparticulière estnécessaire

lorsque utilisé par ou près d’un enfant.

•Suivez les recommandations d’utilisation de ce manuel. Utilisez uniquement les

accessoires recommandés par le fabriquant.

•Ne pas utiliser si le cordon ou la fiche sont endommagés.Si l’aspirateur ne fonctionne

pascommeilledevrait,s’ilaétééchappé,s’ilestendommagé,s’ilaétélaisséàl’extérieur

ou échappé dans l’eau, retournez-le à un centre de service avant de utiliser.

•Ne pas le tirer ou le transporter par le cordon, ne pas utiliser le cordon en guise de

poignée. Ne pas fermer une porte sur le cordon ou tirer le cordon sur des coins ou

distance des surfaces chauffantes.

•Ne pas utiliser des rallonges ou des prises qui n’ont pas de capacité suffisante pour

transporter le courant.

•Fermer tous les contrôles avant débrancher.

•Ne pas débrancher en tirant sur le cordon. Pour débrancher, tenez la fiche et non le

cordon.

•Ne pas manipuler la fiche ou l’aspirateur avec les mains mouillées.

•Nepas rieninsérerdansles ouvertures.Nepas utilisersidesouverturessontbloquées;

assurez-vous qu’elles soient dégagées de poussière, mousse, cheveux ou toute autre

chose qui pourrait réduire le passage de l’air.

•Cetaspirateurcréedelasuccionetcontientunrouleau-brossetournant.Tenirlesparties

mobiles et les ouvertures loin des cheveux, du linge, des doigts et de toute partie du

corps.

•Ne pas ramasser des objets qui brûlent ou fument comme les cigarettes, allumettes ou

cendres chaudes.

•N’utilisez pas sans le sac de poussière en place.

•Les poulies du courroie peuvent devenir chaudes pendant l’utilisation normale. Pour

prévenir des brûlures, évitez de touché la poulie du courroie lorsque vous réparez la

courroie.

•Portez une attention particulière lorsque vous nettoyez les escaliers.

•Ne pas utiliser pour ramasser des liquides inflammables ou combustibles comme de

l’essence: Ne pas utiliser dans les endroits où ces liquides pourraient être présents.

•Entreposez votre aspirateur à l’intérieur dans un endroit propre et sec.

•Maintenez un bon éclairage à l’endroit où vous travaillez.

•Débrancher les appareils électrique avant de les balayer.

CONSERVEZ CES INSTRUCTIONS

To reduce the risk of electric shock, this appliance has a polarized plug (one blade

is wider than the other).This plug will fit in a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician to install the proper outlet. Do not change the plug in any way.

Afin de réduire le risque de choc électrique, cet appareil est muni d’une fiche

polarisée (une des lames est plus large). Cette fiche ne peut être insérée dans une

prise polarisée que d’une seule façon. Si la fiche ne peut être insérée dans la prise,

retourner la fiche. Si la fiche ne peut toujours pas être insérée dans la prise, faire

installer une prise adéquate par un électricien qualifié. Ne pas modifier la fiche.

GENERAL INFORMATION

The cleaner is designed to pick up dirt and dust particles. Avoid picking up hard or

sharpobjects with the cleanerto preventbagtears,hose clogs, and fanblade breakage

with subsequent motor damage.

Service Information

The instructions in this booklet serve as a guide to routine maintenance. For additional

service information telephone our toll free number for the nearest Eureka Authorized

Warranty Station.You should know the model,type and serial numbers when you

call: USA: 1-800-282-2886

México: 5670-6169

Canada: 1-800-282-2886

If you prefer, you can write to The Eureka Company, Service Division, 807 North Main

Street, Bloomington, Illinois 61701, USA. In Canada write to The Eureka Company,

866 Langs Drive, Cambridge, Ontario N3H 2N7.Refer toThe Eureka LimitedWarranty

for complete service information.

DO NOT OIL the motor or the brush roll at any time. The bearings are

permanently lubricated and sealed.

Rating Plate

The model, type, and serial numbers are

indicated on the rating plate located on the

underneathsideofthecleaner.For promptand

complete service information, always refer to

these numbers when inquiring about service.

Model & Type_________________________

Serial No.____________________________

THE EUREKA COMPANY

BLOOMINGTON, ILLINOIS 61701

MODEL TYPE SERIAL NO.

VOLTS AMPS. HERTZ

SERVICE INFORMATION: 1-800-282-2886

HOW TO ASSEMBLE

CAUTION: Completely assemble vacuum cleaner before using.

Handle styles may vary. One handle

has four snap pins on the back side

of the handle, the other handle has

two snap pins on each side.The cord

hooks may be different.

Step 3 - Handle Socket

Push handle into handle socket E so

handle grip curves away from the

cleaner. Align the holes, insert the 2-

part bolt C and tighten.

Step 2 - Fastener

Push fastener B into a hole and apply

thumbpressuresofastenersnapsinto

position. Secure second fastener.

Repeat steps 1 and 2 to complete the

assembly of the handle. See Detail B.

Step 1 - Handle Connector

Push connector A into the upper

handle and align holes. One

connector, shown, is flat on one side

andthe 4 pins snap intoone side. The

connector in Detail A has 2 snap pins

on each side and alignment tabs that

slide into the handle.

Detail A Detail B

C–

Assembly Packet

Tab

D - BAG

SCREWS

C - 2-PART

BOLT

B -

FASTENER

A - CONNECTOR

Step 4 - Outer Bag

Holdouterbagwithzipperawayfrom

handle.

Important: To provide a

good gasket seal, the bag

coupling must seat firmly against

the motor base and not overlap

the furniture guard.

Start the bag

screws D by hand, then tighten with

a screwdriver.

Step 5 - Bag Support

Loop the spring F onto the bag

support G, located to the back of the

upper cord hook.

Step 6 - Cord Storage

Securethecordin the guide below the

upper cord hook as shown or secure

thecordintothe side of the upper cord

hook.

Securecord into lower cordhook. Pull

up on cord to tighten but leave slack

near the base so the cord does not

strain when the handle is lowered for

use. Wrap the cord around the cord

hooks. Fasten the plug to the cord to

prevent unwinding.

Upper Cord

Hook

Upper

Guide

Lower Cord

Hook

C–

HOW TO USE

The upright vacuum cleaner is designed to be used on multiple types of carpeting. Do

not attempt to use the upright vacuum cleaner on bare floors, as damage to the

floor covering may result. Above the floor cleaning tools are available (optional).

The front of the cleaner has an adjustment that

raises or lowers the cleaner base to match the

type of carpet. With the cleaner cord unplugged,

settheadjustmenttolowestsettingformaximum

cleaning.If the cleaner is difficult to push, move

adjustment to next highest setting until cleaner

iscomfortableto push.The brush rollmust reach

the carpet for effective cleaning.

Make each adjustment with

cleaner switch off and cord

disconnected from outlet. For

ease in moving the adjustment

knob, place handle in operating

position and tilt cleaner back to

remove weight from front wheels.

Cleaner Height Setting

WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts

of body away from any moving part (such as the revolving brush).

Turn off the switch and unplug the cleaner before changing the

cleaner height setting.

Handle Adjustment

With the tip of the foot, press down to

release the handle lock located at the left

rear side of the cleaner. Move the handle

and adjust it to the desired position for (1)

storing upright, (2) operating the cleaner at

a comfortable height for the user, and (3)

cleaning underneath low furniture.

Handle Lock

1. Store

2. Use

3. Clean

Underneath

ON/OFF

Power Switch

The power switch is mounted on the motor

hood. A push with the foot turns the motor

ON; push again to turn the motor OFF.

Cord Storage

The cleaner has two convenient cord

storage hooks attached to the handle.

However, some models feature a quick

release cord hook on the upper handle. A

downward twist of the cord hook frees the

cord for quick removal. With either style,

wind the cord around the hooks for storage.

Fasten the plug to the cord to prevent

unwinding.

HOW TO MAINTAIN

The instructions given in this booklet serve as a guide to routine maintenance. To

avoid unnecessary service calls, check the bag, belt and brush roll often.

Disposable Dust Bags

Paper bagsplayavery importantrole inthe efficiency ofa vacuum cleaner.The purpose

of a paper bag is to trap dirt. But at the same time the bag must be porous enough to

allow air to pass through. If the paper bag becomes clogged, no air can pass through

the cleaner and no cleaning can take place, regardless of how powerful the unit is.

Change the dust bag frequently. Some fine particles can restrict airflow very quickly

and will decrease performance even before the bag appears to be full. For that reason,

when vacuuming carpet fresheners or cleaners, powder, plaster dust, or similar fine

substances, the bag may need to be changed more often.

HowTo Change Disposable Dust Bag–Style F & G

Cleaner Care

NOTE: Turn off the switch and unplug the electrical cord before cleaning unit.

To keep the vacuum cleaner looking new, it can be wiped with a damp cloth and a mild

soap solution, then thoroughly dried. Never use any type of chemical as chemicals

can damage the cleaner.When not in use, the cleaner should be stored in a clean, dry

place.

Ask for GENUINE EUREKA

dust bags–Style F & G.

Look for the symbol.

NOTE: Turn off the switch and unplug the electrical cord before changing dust

bag. Never operate the vacuum cleaner without the dust bag.

GENUINE

EUREKAPRODUCT

6. Roll up coil spring.

7. Place paper bag into

outer bag.

NOTE: Be certain

there are no

folds at the top

or bottom of

the paper bag.

8. Lift zipper

4. Unfold

new

bag.

3. Pull bag

throat off

sleeve.

1. Pull

zipper

down

5. Place bag

throat on

sleeve.

TOP

BOTTOM

THROAT

2. Roll down coil

spring.

Brush Roll Belt

The brush roll belt on the upright vacuum cleaner drives the brush to agitate, sweep,

and comb the carpet nap.The belt should be checked regularly to be sure it is in good

condition. Replace the belt if it is stretching, cracking, or slipping. Cut away any hair or

thread wound around the brush roll or the belt pulley because the buildup could cause

the belt to rotate unevenly.

How To Replace A Worn Belt

NOTE: Turn off the switch and unplug the electrical cord before replacing belt.

Belt pulleys can become hot during normal use.To prevent injury, avoid

touching the belt pulley when servicing the drive belt.

IMPORTANT: Improper installation of the brush roll or brush roll belt could cause

carpet or cleaner damage.

Look for the symbol.

Ask for GENUINE EUREKA

replacement belts No. 52100. GENUINE

EUREKAPRODUCT

✎

1. Release cam locks.

Belt

Guide

Check for brush wear, see Brush Roll

instructions.

3. Place new belt around brush roll.

4. Align brush roll pulley with belt

guide.

Brush Roll Pulley

Motor

Pulley

2. Pull up on belt to rotate it off the

motor pulley. Lift up on brush roll

and remove worn belt.

5. Place rubber end cap covers over

both end caps (flat side against end

cap).Align holes and secure.Then,

slant brush roll forward so end

caps are in line with slots in cleaner

base.

6. Push brush roll into base

✎

8. Place slots of bottom plate over

tabs of cleaner base.

9. Seat and secure cam locks

7. Place lower side of belt into belt

guide and pull to stretch the belt

around the left side of the motor

pulley. Rotate pulley to secure

belt into groove.

Brush Roll

The rotating brush roll sweeps and combs the carpet nap. Keep the brush roll free

from hair and threads so it will continue brushing. When the bristles of the brush roll no

longer touch a straight edge held against the bottom plate, the brush roll is ineffective

because the bristles no longer touch the carpet nap. To maintain the most effective

cleaning, the brush roll should be replaced.

Headlight Bulb (Standard on most models)

NOTE: Turn off the switch and unplug the electrical cord before replacing

headlight bulb.

Headlight style varies by model. Locate the notches that release the tabs at either (1)

top, (2) side, or (3) bottom of the lens, as illustrated. Place a screwdriver into one

notch; twist or pry the screwdriver to release the lens. Repeat for the second notch on

the opposite side.

Rotate the bulb socket forward. Push bulb in and turn to remove. Secure new bulb into

socket and rotate bulb socket backward.

Replace the lens tabs into the top or the bottom of the hood opening. Rotate lens to

position and press down at notch until the lens locks into position.

NOTE: Use 25 watt replacement bulb, only.

Ask for GENUINE EUREKA replacement bulb, 40009A.

Andere Handbücher für 600 Series

Inhaltsverzeichnis

Andere Sanitaire Staubsauger Handbücher

Sanitaire

Sanitaire 9020 Series Bedienungsanleitung

Sanitaire

Sanitaire SC600 Series Bedienungsanleitung

Sanitaire

Sanitaire 800 Series Bedienungsanleitung

Sanitaire

Sanitaire SC889 Series Bedienungsanleitung

Sanitaire

Sanitaire Series SC5500 Bedienungsanleitung

Sanitaire

Sanitaire 670 Series Bedienungsanleitung

Sanitaire

Sanitaire SC3683D Bedienungsanleitung

Sanitaire

Sanitaire Quick Kleen SC899 Bedienungsanleitung

Sanitaire

Sanitaire 580 Series Bedienungsanleitung

Sanitaire

Sanitaire Series 3680 Bedienungsanleitung

Sanitaire

Sanitaire SC684 Bedienungsanleitung

Sanitaire

Sanitaire 4500 Series Bedienungsanleitung

Sanitaire

Sanitaire SL4110A Series Bedienungsanleitung

Sanitaire

Sanitaire SC5745A Bedienungsanleitung

Sanitaire

Sanitaire Canister Vac Bedienungsanleitung

Sanitaire

Sanitaire S107 Bedienungsanleitung

Sanitaire

Sanitaire Eon quietClean SC5500A Series Bedienungsanleitung

Sanitaire

Sanitaire SP6900 Bedienungsanleitung

Sanitaire

Sanitaire SC886-E Handbuch

Sanitaire

Sanitaire System_Pro SP6952 Bedienungsanleitung

Sanitaire

Sanitaire Z4500 Series Bedienungsanleitung

Sanitaire

Sanitaire S3680 Series Bedienungsanleitung

Sanitaire

Sanitaire DuraLux SC9180 Bedienungsanleitung

Sanitaire

Sanitaire SC7100A Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung