SATO KEIRYOKI 1722-00 Bedienungsanleitung

3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 Japan

URL: http://www.sksato.co.jp/english/

Instruction Manual for

Bimetal Thermometer for Meat

Thank you for purchasing Bimetal Thermometer for Meat.

- This product is designed to measure temperature (0 to 100°C) of a loaf of meat. Do not

use it for other purposes.

- Read this manual thoroughly before using the bimetal thermometer. Keep the manual in a

safe place for future references whenever necessary.

Measurements

1. Use the clip to put the clip on the edge of pan.

2. Insert the sensing stem into the target to the mark (about 9.5cm from the end) at least.

3. After the measurement, wipe the grim on the stem with a kitchen paper or like confirming

that the temperature is lower than 40°C.

Name of Section

NB. Never use the thermometer in the cooking equipment such as microwave and

oven

Cautions

For your safety and proper use of the bimetal thermometers, be sure to observe the following:

- Never use the bimetal thermometer out of the measurement range (0 to 100°C).

- Never disassemble or alter the thermometer, which may cause malfunctions.

- Do not drop, bent or apply shock to the thermometers. Otherwise, malfunctions may occur.

- Do not alter, bend or bind the sensing stem, as doing so may break or damage the

thermometer.

- Do not wash the thermometer with water. This is not waterproof type

- To prevent injury, be careful of the sharp tip of the sensing stem especially when cleaning

the stem after taking measurements.

- To prevent injury, be careful of the sharp tip of the sensing stem especially when cleaning the

stem after taking measurements.

- This thermometer cannot be used for approval purpose.

meter

the mark (about 9.5cm from the end)

sensing stem

holder

3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 Japan

URL: http://www.sksato.co.jp/english/

Maintenance

For accurate measurements, it is desirable to confirm the accuracy of the bimetal

thermometers in comparison with the reliable thermometers once a year.

Specifications

Name of Product

Bimetal Thermometer for Meat

Model No.

1722-00

Measuring range

0 to 100℃

Min. Graduation

1℃

Accuracy

±1℃

Sensing Elements

Bimetal

Materials

Case

Stainless Steel

Case cover

Glass

Stem

Stainless Steel

Clip

Stainless Steel

Case Diameter

50 mm

Sensing Stem

4 mm dia. x 150 mm (L) point end

Weight

approx. 32g

Andere SATO KEIRYOKI Messgerät Handbücher

SATO KEIRYOKI

SATO KEIRYOKI 1518-00 Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI PC-51D Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI PC-7700 II Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI 7720-00 Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI SK-5RAD-MR Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI SK-650PH Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI SWPII-07 Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI NSII-TQ Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI SK-M350-TRH-I Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI SK-620PHII Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI SK-181GT Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI SK-660PH Series Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI PALMA 2 Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI PC-5110 Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI WVAT6D0-3-10 Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI 640S-1 Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI SK-5RAD-SP Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI 7790-00 Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI 7610-20 Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI 1410-00 Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI PC-7900GT Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI PC-5400TRH Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI SK-93F-II Bedienungsanleitung

SATO KEIRYOKI

SATO KEIRYOKI PC-9225 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung