Enable User Code (ID03-30)
•Press “Menu/OK”. The screen will show “Select
Menu”. Press “▲” or “▼” to select “System Menu”.
Press “Menu/OK” again.
•Place an enrolled administrator’s finger (ID No. 01
or 02) on the scanner and hold. After the fingerprint
is verified successfu lly, press “▲” or “▼” to select
“Enable User Code”, press “Menu/Ok”.
•The screen will display “ID:03 Code Enable?”, press
“▲” or “▼” to select the desired ID No. to be
enabled. When the desired ID No. is visible on the
screen, press “Menu/Ok” to select. This User ID will
now have the ability to have a code in addition to an
enrolled fingerprint.
Set User Code (ID03-30)
Important: The User must no w set his own code u sin g
his enrolled fingerprint.
•Press “Menu/Ok”, press “▲” or “▼” to select
“System Menu”. Enter the System Menu with the
User’s fingerprint (in this example using the
fingerprint of ID No.3).
•Press “▲” or “▼” to select “Set/Change User Code”.
•Enter a unique 6 digit code.
•Enter the same 6 digit code.
•When the LCD screen displays: “ID:03 Code Saved”,
the code of ID:03 has been set successfully .
•Note: If consecutive four digits of a new code (for
example 512341) is the same as one of the enrolled
codes (612345) , LCD screen wil l sh ow: “Code is
similar” and the code will not be accepted. Enter a
different code for this User.
For a full set of Operating Instructions please ca ll
(805) 988-8088 or email info@secura msys.com
To Open the Lock using your Code
•Enter 6 digit code.
•Valid code will be verified and the lock will open.
That’s it!
Enroll a New User (ID 03-30)
•Press “Menu/OK”. The screen will show “Select Menu”.
•Press “▲” or “▼” to select “System Menu”. Press
“Menu/OK” again.
•Place an enrolled administrator’s finger (ID No. 01 or
02) on the scanner and hold.
•After the fingerprint is verified successfully, the LCD
screen shows: “Select Menu”, press “▲” to select
“Enroll New User”. Press “Menu/OK”.
•Select ID and press “▲” or “▼” to ID number and
press “Menu/OK”.
•Place a finger on the optical reader and hold.
•Hold finger on the reader until the messages above
appear. The fingerprint is read, checked and enrolled
Quick Start Guide –ScanLogic D Series
IMPORTANT: Warranty Information
Your safe lock is eligible for a 12 month warranty covering
product defects. Within 90 days of purchasing your safe/safe
lock, please visit our website to register your product.
Please visit www.securamsys.com/warranty and look for the
button entitled “Register My Warranty”.
