Securam V8 Technisches Handbuch

SECURAM

Finger Vein Door Lock V8

Operation Instruction

Standalone version/Wireless version

Front Panel Function

SECURAM logo plate

Finger vein reader

Lever handle

Emergency key hole

Slide cover

Push up the slide cover

to verify finger. Turn the handle

Mobile wireless

connection indicator

Internet wireless

connection indicator

Low battery indicator

Set language

Reset to factory default

Restrict visitor

Authorize your phone

Set volume

Allow visitor

Cancel operation

Operation successful

Door bell

Setting

Add user

Delete user

Armor system

Battery case screw

Loosen the screw counterclockwise

and then pull out the battery case

and the slide cover returns to

the closed position automatically

Back Panel Function

Back panel slide cover

Lever handle

Thumbturn

Turn to different positions

to enable different functions

Lockout

Disable unlocking

Cancel Lockout

Enable unlocking

Enable away mode

Turn the handle, and lock

can't open. Prevent unlocking

from peephole

1. Loosen the battery case screw counterclockwise

with a coin or a slotted screwdriver, pull out the

battery case, and load 6 1.5V LR6 batteries.

2. Insert the battery case into the front panel, and

tighten the screw.

● Battery must be LR6 alkaline. Otherwise, it may

cause lock malfunction.

Change Battery

Battery loading direction

1.5V LR6 battery

Battery case

Battery case screw

Operation Instruction

Code Masking (Prevent others from viewing your code)：Add

any random digit before or after the correct 6-digit code (at

most 3 digits). The lock will open only if the 6 consecutive digits

of the valid code are entered. Press “√” button to confirm when

the code is less than 9 digits.

1) First-Time Use：Enter the default admin code 123456→ Press

“√” button→Turn the handle to open the door.

2) Add First Owner: Press button→Enter 123456→Press

“√” button→Push up SECURAM logo slide cover→Enroll first

finger 3 times →Enroll second finger 3 times→Enter code twice.

Note: 1. Code can't be 123456.

2. Code can't start with 00. If code is 008888, the voice

prompt will say,“invalid code”

3. Code has to be set for first owner. Otherwise, adding

first owner fails.

3）Unlocking Options:

●Unlock with finger vein：Push up SECURAM logo slide cover,

and place finger on reader following the voice prompt.

88 123456 9

Correct code

Masking code

To properly place finger：Lay the finger flat right on the reader.

(Note: Finger nail should not exceed 5mm in length. Otherwise,

it will affect authentication).

● Unlock with code：Enter a valid 6 digit code, and press “√”

button.

To mask your code: Add any random digit before or after the

correct 6-digit code (at most 3 digits). The lock will open only if

the 6 consecutive digits of the valid code are entered. Press “√”

button to confirm when the code is less than 9 digits.

4) Add User：

Add Owner：Press →Verify owner 1's or owner 2's finger

or code→Place first finger 3 times→Place second finger 3 times

→Enter code twice.

Add Visitor: Press →Verify owner 1's or owner 2's finger

or code→Press 0→Place first finger 3 times→Place second

finger 3 times.

Note: 1. Code can't be 123456.

2. After owner finger is added successfully, press “←”

button to cancel code setting according to the voice prompt.

5）Delete User：

Delete Owner: Press →Verify owner 1's or owner 2's finger

or code→Choose the owner ID No. to be deleted→Press the “√”

button to confirm.

Delete Visitor: Press →Verify owner 1's or owner 2's finger

or code→Press 0→Choose the Visitor ID No. to be deleted→

Press the “√” button to confirm.

1) Allow Visitor: Press → Press 0 →Verify owner 1's or

owner 2's finger or code.

2）Restrict Visitor: Press → Press 7 →Verify owner 1's or

owner 2's finger or code.

3）Set Language: Press → Press 3 →Verify owner 1's or

owner 2's finger or code→ Press 3→Press “√” button to

confirm.

4）Reset to Factory Default: Press → Press 5 →Verify

owner 1's or owner 2's finger or code→ Press “√” button twice.

5）Set Volume: Press →Press 9 →Verify owner 1's or

owner 2's finger or code→Press 9→Press “√” button to confirm.

User Rights：

1) Owner 1 and Owner 2 are administrators, and can add and

delete users and set up all parameters.

2) Owners 3-9 can unlock and set codes.

3) Visitors 1-6 can only unlock.

+ Number Button

Emergency Key

Press down the

handle to unlock

Insert the key and

rotate 120° clockwise

Press down the

handle to unlock

Rotate counterclockwise,

pull out the key and lock up

2. Mechanical key is only used to force lock it up

when the electronic part fails. Set the lock back to

the status that allows the electronic part to normally

unlock(as shown in illustration).

1. Unlock with key (as shown in illustration)

Press down the

handle to unlock

Press down the handle.

The handle is in idle status

Lock can't be unlocked.

Rotate 120° clockwise

①Insert the key and rotate

120°clockwise

③Then, continue to rotate with

greater force. A click sound will

be heard. Pull out the key

horizontally to lock it up.

④To unlock again, rotate

the key counterclockwise

by 2 turns to its normal

position. Lock can be

unlocked by the electronic

part (unlock with code or

finger).

②Then, the key can't be

rotated further. The lock can

normally open.

Inhaltsverzeichnis

Andere Securam Sperren Handbücher

Securam

Securam ProLogic L01 Bedienungsanleitung

Securam

Securam SH-WB01 Bedienungsanleitung

Securam

Securam SafeLogic Basic Bedienungsanleitung

Securam

Securam ProLogic L02-C Bedienungsanleitung

Securam

Securam SafeLogic Xtreme Bedienungsanleitung

Securam

Securam SH-TB01 Bedienungsanleitung

Securam

Securam SafeLogic Basic Bedienungsanleitung

Securam

Securam SafeLogic Basic Bedienungsanleitung

Securam

Securam SCANLOGIC FPC-1808-II-MB Bedienungsanleitung

Securam

Securam ScanLogic Optical Installationshandbuch

Securam

Securam ScanLogic B22 Bedienungsanleitung

Securam

Securam FPC-0601A-D22 Bedienungsanleitung

Securam

Securam ProLogic L66 Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Securam

Securam SafeLogic Basic Series Bedienungsanleitung

Securam

Securam MANAGER Series Bedienungsanleitung

Securam

Securam ProLogic B01 Bedienungsanleitung

Securam

Securam ScanLogic D66 Bedienungsanleitung

Securam

Securam SafeLogic Xtreme Betriebsanleitung

Securam

Securam SafeLogic TopLit Series Bedienungsanleitung

Securam

Securam ProLogic B22 Bedienungsanleitung

Securam

Securam D Series Bedienungsanleitung

Securam

Securam ProLogic L22 Bedienungsanleitung

Securam

Securam SafeLogic C10 D-Drive Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung

Metra Electronics

Metra Electronics Door Access Terminal Combo Bedienungsanleitung