SICK IDM140WLAN Series Betriebsanleitung

Hand-held Scanners

Hand-held Line

PROGRAMMING MANUAL

IDM1xx WLAN

IDM

WLAN

Reference Manual

8014567/2012-02-09

Revision History

SICK makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty of

merchantability and fitness for any particular purpose. SICK shall not be liable for errors contained herein or for incidental

consequential damages in connection with the furnishing, performance, or use of this publication. This publication contains

proprietary information that is protected by copyright. All rights are reserved. No part of this publication may be photocopied,

reproduced or translated into any language, in any forms, in an electronic retrieval system or otherwise, without prior written

permission of SICK.

Rev. No. Released Date Description

Rev.A1 Feb.09, 2012 First Release

IDM

WLAN

Reference Manual

8014567/2012-02-09

Warranty

The currently released status of SICK General Terms of Delivery Factory Automation and LogisticsAutomation shall apply

Regulatory

FCC, CE

RohS All WLAN IDM devices are conform to RohS standards

Print out this manual

If you want to print out this manual please ensure that the original size is remained and the print out is of good quality.

Otherwise the configuration codes contained in this manual may be distorted and cannot be scanned anymore.

Deutsche Version / German version

Das Handbuch ist auch in deutscher Sprache verfügbar. Es kann unter www.sick.com heruntergeladen werden.

This manual is available in German language as well. You can download it on www.sick.com.

IDM

WLAN

Reference Manual

8014567/2012-02-09

Table of Contents

Getting Started

Getting Familiar with Your IDM WLAN 5

Preparation before Using 7

Install necessary software 9

Find out required information for network settings 10

Further settings 11

Connecting the IDM WLAN scanner

Ad Hoc Connection 15

Infrastructure mode (access point) 23

Batch Mode

Configuration and running batch mode 25

Appendix

Useful Tools 28

Indications 31

Symbology ID Table 33

HEX/ASCII Reference Table 34

IDM

WLAN

IDM

WLAN

Reference Manual

8014567/2012-02-09

Left Function Key

Navigation Key

Right Function Key

Beeper Hole

Link Indicator

Status Indicator

Battery Cavitiy

End cap

ether Plate

Lanyard Cat

No Wi-

Profile

Getting Familiar with Your IDM WLAN

IDM 40WLAN Series Scanner IDM 60WLAN Series Scanner

The Navigation Key provides up, down, left and right 4-direction navigation. And the Center key is used to launch an

application, select an item, or activate the Virtual Keyboard.

IDM 40 and IDM 60 charging cradle

LCD Display

Scan Window

rigger

Reset Button

Power Indicator

Reserved

USB Bus Power Switch

USB interface port

DC Power Jack

IDM

WLAN

IDM

WLAN

Reference Manual

8014567/2012-02-09

Virtual Keyboard

A unique virtual keyboard has been provided by the Wi-Fi scanner to fulfill various inputs of alphabet, number, symbol and

ASCII value. You can use 4 toggle keys ( ) to switch into different keyboard layout before using the

navigation key to locate your desired inputs for information entering.

Alphabet

Keyboard

ASCII

Keyboard

Symbol Keyboard

IDM

WLAN

IDM

WLAN

Reference Manual

8014567/2012-02-09

Preparation before Using

Install the Battery

Charge the Battery

Ensure the battery contacts of the battery pack are facing the charging contacts inside the battery cavity.

Slide the battery pack into the battery cavity until hearing a click sound before locking it with the end cap.

The scanner

will give 4 beeps when the battery pack is installed properly if the battery pack still has power.

Secure the end cap with the screw provided (IDM140-WLAN

) or via turning the integrated thumb wheel

(IDM160-WLAN).

You can use the overlapping battery label to pull out the battery if needed.

IDM

WLAN

IDM

WLAN

Reference Manual

8014567/2012-02-09

Use USB Bus Power

Plug the AC power plug into the appropriateAC wall socket.

Plug the DC power cord of the power supply unit into the DC power jack of the cradle. The cradle will issue the power on

beeps. The center (IDM140 cradle) or upper (IDM160 cradle

) indicator of smart cradle will give one blue blink. The

power indicator of charging cradle will turn steady blue.

Place the scanner on the cradle. The status indicator of scanner will turn steady red if the ba

ttery is not fully charged.

When the battery is fully charged, the status indicator of scanner will flash green at regular interval.

Please charge the new battery pack for 8 hours prior to the first use.

USB 3.0 is available in your host device, both battery charging and regular operation can be supported by the USB

Bus Power without using external power supply.

If you want to use this feature, please slide the USB bus power switch to “ON”. Then connect the

cradle and host device

via USB cable.

IDM

WLAN

IDM

WLAN

Reference Manual

8014567/2012-02-09

Install necessary software

Before you start using the Wi-Fi scanner, you are recommended to install following software into your host machine. You can

download the software for free on www.sick.com.

SICK WaveCentre

The WaveCentre is a useful Windows-based wireless management utility together with an IP virtual COM software driver.

Once you installed WaveCentre into your host machine, it can create a virtual COM port for each connected Wi-Fi scanner

corresponding to its IP address. Then the Wi-Fi scanner will work as a local serial device of the remote host.

SICK IDM Wi-Fi Set Up Tool

By using the SICK IDM Wi-Fi Set Up Tool, you can create Wi-Fi profiles, change configurations and upgrade firmware with

ease. Please note that you have to install the USB virtual COM software driver before using the Set Up Tool.

To connect the scanner to the set up tool you have to set it into host link mode. This can be done via the scanner display

under “Setup” and then “Advanced”. You then need to place the scanner on the cradle and go to section upload after

opening the set up tool software.

IDM

WLAN

IDM

WLAN

Reference Manual

8014567/2012-02-09

Find out required information for network settings

SSID

The SSID is an 802.11 service set identifier of Independent Wireless Host or Access Point (AP).

Operation Mode

The Wi-Fi scanner supports both “Infrastructure” and “Ad-Hoc” modes. Please note that if you select Ad-Hoc mode, you are

suggested to use the Static IP. And the Gateway and Subnet Mask have to be the same as the remote host.

Region and Channel

The region is where the Wi-Fi scanner is used, and the channel number must be the same as the channel setting of AP or

the remote host.

Security

The Encryption and Authentication will be used to communicate with the AP or the remote host, such as WEP, WPA and

WPA2.

IP Type

Both Static IP and DHCP can be used in your wireless network. But you are recommended to use Static IP for better

management purpose.

Remote IP Address and Port

The Remote IP Address is an IP address of the remote host. And the Port will be a listen port of e.g. WaveCentre used to

communicate with your Wi-Fi scanners.

Local IP Address

The Local IP Address is the IP address of the Wi-Fi scanner.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SICK Scanner Handbücher

SICK

SICK S300 Mini Bedienungsanleitung

SICK

SICK TiM31x Bedienungsanleitung

SICK

SICK S200 Bedienungsanleitung

SICK

SICK S300 Standard Bedienungsanleitung

SICK

SICK scanGrid2 CANopen Bedienungsanleitung

SICK

SICK S3000 Cold Store Betriebsanleitung

SICK

SICK IDM120 Series Bedienungsanleitung

SICK

SICK TIM3xx Handbuch

SICK

SICK S300 Mini Bedienungsanleitung

SICK

SICK S3000 Expert Bedienungsanleitung

SICK

SICK scanGrid2 I/O Bedienungsanleitung

SICK

SICK IDM1 Series Bedienungsanleitung

SICK

SICK EtherCAT microScan3 Bedienungsanleitung

SICK

SICK S3000 Cold Store Bedienungsanleitung

SICK

SICK microScan3 - EFI-pro Bedienungsanleitung

SICK

SICK TiM31x Bedienungsanleitung

SICK

SICK TIM310-1030000S01 Handbuch

SICK

SICK S300 Mini Bedienungsanleitung

SICK

SICK S3000 PROFINET IO Bedienungsanleitung

SICK

SICK nanoScan3 I/O Bedienungsanleitung

SICK

SICK IDM 1-4 Series Bedienungsanleitung

SICK

SICK ZS3608 Bedienungsanleitung

SICK

SICK outdoorScan3 Core I/O Bedienungsanleitung

SICK

SICK microScan3 Core I/O Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung