Siemens ACUSON P300 Bedienungsanleitung

ACUSON P300™ Ultrasound System

Control Panel Diagram

Power On / O

TGC Controls

3Le Mouse Click

4Action

5Right Mouse Click

6 Trackball

7 Pointer

8 Freeze

Start/End

Color Doppler

16 Dual (Le)

Probe/Preset

Measure (Label)

17 Dual (Right)

24 ECG/Transmit Power/

Edit ID

Conguration Menu

Measure (Generic)

18 Auto Optimization/

2D, M-mode Gain

Archive Review

Update/Line/

Doppler Gain

19 Record/Print

26 Pictogram

Exam Review

13 Audio (Decrease)

20 Clip/Image Store

27 Report

CW Doppler

14 Audio (Increase)

21 2D

28 Start/Stop VPan

PW Doppler

15 eSie Wheel

(Sokey control)

22 M-mode

29 Depth/Zoom

www.siemens.com

Tools/VPan (Panoramic)

30 [Inactive - For Future Use]

ACUSON P300™ Ultrasound System Quick Reference Guide

Page | 1

*The ACUSON P300 System is not commercially available.

Due to regulatory reasons its future availability cannot be guaranteed.

ACUSON P300™ Ultrasound System*

Quick Reference Guide – System Overview

Introduction

This Quick Reference Guide contains brief descriptions and instructions for the functions

most commonly used to perform 2D, M-mode and Doppler exams

This supplement is not a substitute for the system Operators Manual.

Contents

Exam Basics

2D Controls

Color, PW and CW Doppler and M-mode Optimization

Measurements and Calculations

Text and Pictograms

Data and Image Management

Exam Basics

The Power On/Off button is located on the upper right side of the system.

A solid yellow light will indicate the power is on.

The Battery option will allow the system to run on internal battery for 80 minutes

(scanning) or 120 minutes (standby).

Begin an Exam

Press START/END

Enter patient name, ID and other exam information

Press TAB to move between data fields

Roll the trackball to move to the next data field and press Right Select

Select the proper APPLICATION, PRESET and PROBE

Press Enter or select OK to start exam

ACUSON P300™ Ultrasound System Quick Reference Guide

Page | 2

*The ACUSON P300 System is not commercially available.

Due to regulatory reasons its future availability cannot be guaranteed.

Modify Patient Data During an Open Exam

Press OPTIONS

Rotate S wheel to EDIT ID and press the S button

Edit patient data

Select OK

Press Enter on the QWERTY keyboard

Note: Editing patient data will re-name all previously stored images/clips within the study.

Modify Patient Data From Patient Archive

Press ARCHIVE/REV

Highlight patient

Rotate Swheel to NEXT/PREVIOUS and press the S button

Rotate Swheel to EDIT ID and press the S button

Note: Editing patient data will re-name all previously stored images/clips within the study.

Modify Application

Press START/END

Select CURRENT

Select new APPLICATION, PRESET and PROBE

Select OK

Change Transducer and/or Preset

Press PROBE/PRESET

Select PRESET and/or PROBE

Select OK

The UPDATE/LINE/GAIN controls gain levels (rotate) and cursor/update

(press) for CW, PW and Color Doppler

The AUTO/GAIN controls 2D and M-mode gain levels (rotate), one-button gain

and TGC optimization for 2D (press)

ACUSON P300™ Ultrasound System Quick Reference Guide

Page | 3

*The ACUSON P300 System is not commercially available.

Due to regulatory reasons its future availability cannot be guaranteed.

Storing Images/Clips

When frozen, press CLIP/IMAGE to save a static image to the local archive

When live, press CLIP/IMAGE to acquire and save a clip to the local archive

The saved data displays in the thumbnail panel on the right of the screen

Press REC/PRINT to print the onscreen image

Note: Press MENU to set up PERIPHERALS assigned to REC/PRINT

Review an Image

Press EXAM/REV during an active exam to view and delete images

To view thumbnails 1:1, roll trackball to thumbnails and press Right Select or Left

Select

To delete images, roll trackball to thumbnail and double-click Right Select

A red check mark will appear in the upper left corner

Select DELETE

Select YES

Activate Review on a Previous Exam

Press ARCHIVE/REV to view patient archive

Highlight patient name and double-click Right Select or Left Select to review

2D Controls

Basic System Optimization

The following table identifies 2D system optimization and technologies which can be

used during exams.

The Swheel controls the softkey options located at the bottom of the imaging

screen, rotating the S wheel (green) allows the user to scroll between softkeys, pressing

the S button (yellow) changes the value and the NEXT/PREVIOUS softkey scrolls to

additional pages.

Items in table are not arranged sequentially

To Adjust / Control Do This

Depth Rotate the DEPTH/ZOOM wheel

ACUSON P300™ Ultrasound System Quick Reference Guide

Page | 4

*The ACUSON P300 System is not commercially available.

Due to regulatory reasons its future availability cannot be guaranteed.

Zoom Press DEPTH/ZOOM

Use trackball to adjust position; rotate wheel to adjust size of

ROI

Press DEPTH/ZOOM

Focus Roll trackball to move focal zone(s)

To anchor position of focal zones, press ACTION

TEI

Harmonic Imaging

Rotate S wheel to TEI, then press S button

To change harmonic frequencies, rotate Swheel to

FREQUENCY, then press S button

TEI frequencies range from PEN, GEN, RES

Orient

Up/down invert

Rotate S wheel to ORIENT and press S button

Frequency Rotate Swheel to FREQUENCY and press S button

Rotate Swheel to adjust

Range varies from transducer and application

Size (2D Sector Width)

Increases line

density/frame rate

*Not available on linear

transducers

Rotate S wheel to SIZE and press Sbutton

Rotate Swheel to decrease size of sector

Note: CONCURR is available on phased array transducers

and will automatically reduce 2D image width to the Color

Doppler ROI and allows user to pan image.

Dynamic Range

Adjusts grayscale levels

Rotate Swheel to DYN RANGE and press S button

Rotate Swheel to adjust

Adding Focal Zones

Rotate Swheel to FOCUSES and press S button for additional

foci

Select ACTION to lock focus in place

Range: 1-4; ALTERNATE

Reverse

Left/right invert

Rotate Swheel to REVERSE and press Sbutton

TPVIEW (Trapezoid)

Linear transducers only Rotate Swheel to TPVIEW and press Sbutton

Gray Maps

Applies a post processing

curve that assigns echo

amplitudes to grayscale

Rotate S wheel to GRAY MAP and press Sbutton

Rotate Swheel to adjust

Range: 1-5

ACUSON P300™ Ultrasound System Quick Reference Guide

Page | 5

*The ACUSON P300 System is not commercially available.

Due to regulatory reasons its future availability cannot be guaranteed.

levels

Colorize (Tint)

Sets the chromatic scale

active in 2D

Rotate Swheel to COLORIZE and press S button

Rotate Swheel to adjust

Range: Off(-), Orange, Indigo, Magenta, Blue, Yellow, RGB

Sharpness

Accentuates edges and

small differences in tissues

Rotate Swheel to SHARPNESS and press Sbutton

Rotate Swheel to adjust

Range: 1-5

Density

Adjusts line density

Rotate Swheel to DENSITY and press S button

Rotate Swheel to adjust

Range: LOW, HIGH

Persistence

Weighted average of

frames over time

Rotate Swheel to PERSIST and press S button

Rotate Swheel to adjust

Range: Off(-),1-6; AVERAGE

Clip Duration

Sets duration of clips

Rotate Swheel to CLIPS DUR and press Sbutton

Range (seconds): 1, 2, 3, 4, 5, 7, 10, 20, 30, 60, UNLIMITED

MVIEW

Spatial Compounding

Rotate Swheel to MVIEW and press S button

Rotate Swheel to adjust

Range: Off(-), 1-10

XVIEW

Provides speckle reduction

and contrast enhancement

Rotate Swheel to XVIEW and press S button

Rotate Swheel to adjust

Range: Off(-), 1, 2, C.

XVIEW level Coptions: X SMOOTH 1-5, X DETAIL 1-8,

X ENHAN 1-12

2D Imaging Features

The following table identifies 2D imaging features.

Items in table are not arranged sequentially

Feature To Use Feature

One button image

optimization

Press AUTO to automatically adjust the general gain

and TGC

ACUSON P300™ Ultrasound System Quick Reference Guide

Page | 6

*The ACUSON P300 System is not commercially available.

Due to regulatory reasons its future availability cannot be guaranteed.

Dual Mode

Side-by-side imaging Press left DUAL to activate dual screen display

Press right DUAL to activate right screen display

Press 2D to escape

Note: For live dual, rotate S wheel to NEXT/PREVIOUS, scroll to

SIMULT and press S button.

QUAD Imaging When in DUAL function, select NEXT/PREVIOUS, scroll to

QUAD, press the S button

Press right DUAL button to advance

2D-CFM

Live Dual 2D and Color

Doppler

Rotate Swheel to 2D-CFM and press S button

Allows for live 2D and Color Doppler imaging

VPAN

Activates panoramic

imaging

Press TOOLS , select VPAN, select OK

Press ACQUIRE to activate ROI box, press ACQUIRE to

begin scanning, scan, then press ACQUIRE to end acquisition

Press MEASURE for labeled measurement

Press GENERIC MEASUREMENTS for generic

measurement

Steer Image

Linear transducers only Note: MVIEW must be deactivated.

Rotate Swheel to B-STEER and press S button

Rotate Swheel to steer image

Biopsy

Activates or de-activates

biopsy display

Rotate Swheel to BIOPSY and press S button

Color, PW and CW Doppler and M-mode Optimization

The UPDATE/LINE/GAIN controls gain levels (rotate) and cursor/update (press)

for CW, PW and Color Doppler.

ACUSON P300™ Ultrasound System Quick Reference Guide

Page | 7

*The ACUSON P300 System is not commercially available.

Due to regulatory reasons its future availability cannot be guaranteed.

Color Doppler Imaging

Items in table are not arranged sequentially

To Adjust / Control Do This

Engage Color Doppler Press Cbutton

Color Gain

Rotate the UPDATE/LINE/GAIN wheel

ROI Size and Position Roll trackball to desired position

Press ACTION and roll trackball to desired size

Press ACTION to set

2D-CFM

Live dual 2D and color

Doppler

Rotate Swheel to 2D-CFM and press S button

PWR D (Power Doppler) Rotate Swheel to PWR D and press S button

PRF (Scale/Velocity) Rotate Swheel to PRF and press S button

Rotate Swheel to change PRF

Baseline Rotate Swheel to BASEL and press S button

Rotate Swheel to change

D-Steer

Linear transducers only

Rotate Swheel to D-STEER and press S button

Rotate Swheel to desired steering angle

Color Doppler Frequency Rotate Swheel to FREQUENCY and press S button

Rotate Swheel to adjust

Sensitivity

Rotate Swheel to SENSIT and press S button

Rotate Swheel to adjust

Range: 1, 2, 3

Density

Rotate Swheel to DENSITY and press S button

Rotate Swheel to adjust

Range: LOW, HIGH

Persistence Rotate Swheel to PERSIST and press S button

ACUSON P300™ Ultrasound System Quick Reference Guide

Page | 8

*The ACUSON P300 System is not commercially available.

Due to regulatory reasons its future availability cannot be guaranteed.

Rotate Swheel to adjust

Range: Off(-), 1-7

Color Map Rotate Swheel to COLOR MAP and press S button

Rotate Swheel to adjust

Range: V1-V6, plus two Velocity/Variance maps (VV1 and

VV2).

Filter

Used to reduce the

artifacts caused by

acoustic decoupling or

moving structures

Rotate Swheel to FILTER and press S button

Rotate Swheel to adjust

Range: LOW, MEDIUM, HIGH,ARTEF SUP

Smooth

Makes the flow

representation

homogenous

Rotate Swheel to SMOOTH and press S button

Rotate Swheel to adjust

Range: LOW, HIGH

PW Doppler

PW Doppler audio volume can be decreased or increased by pressing or .

Items in table are not arranged sequentially

To Adjust / Control Do This

Engage PW Doppler Press UPDATE/LINE to activate cursor

Roll the trackball to position cursor

Press the PW control to activate

Auto-Doppler Optimization

Press AUTO

ADM

Automatic Doppler Trace

Rotate Swheel to ADM and press S button

Note: These calculations will not be sent to the report.

B-Ref

Alternates between split

screen or full screen in

Rotate Swheel to B-REF and press S button

Velocity (PRF/Scale) Rotate Swheel to VELOCITY and press S button

Rotate Swheel to adjust

Baseline Rotate Swheel to BASEL and press S button

ACUSON P300™ Ultrasound System Quick Reference Guide

Page | 9

*The ACUSON P300 System is not commercially available.

Due to regulatory reasons its future availability cannot be guaranteed.

Rotate Swheel to change

SV Size (Gate) Rotate Swheel to SV SIZE and press S button

Rotate Swheel to adjust

ΘAngle Rotate Swheel to ΘANGLE and press S button

Rotate Swheel to adjust

D-Steer Rotate Swheel to D-STEER and press S button

Rotate Swheel to adjust

Color ROI and PW cursor will steer together

Invert (Reverse) Rotate Swheel to REVERSE and press S button

Triplex (PLEX) Rotate Swheel to PLEX and press S button

Frequency Rotate Swheel to FREQUENCY, press S button

Rotate Swheel to adjust

Format Rotate Swheel to B FORMAT and press S button

Rotate Swheel to adjust

Range: SMALL, MEDIUM, LARGE, and DUAL

Dynamic Range

Adjusts grayscale levels

Rotate Swheel to DYN RANGE and press Sbutton

Rotate Swheel to adjust

Gray Maps

Post processing curve

that assigns echo

amplitudes to grayscale

levels

Rotate Swheel to GRAY MAP and press S button

Rotate Swheel to adjust

Range: 1-5

Colorize (Tint)

Sets the chromatic scale

active in PW

Rotate Swheel to COLORIZE and press S button

Rotate Swheel to adjust

Range: Off(-), Orange, Indigo, Magenta, Blue, Yellow,

RGB

Filter

Filters Doppler signal

Rotate Swheel to FILTER and press S button

Rotate Swheel to adjust

Reject

Improves spectral curve

display

Rotate Swheel to REJECT and press S button

Rotate Swheel to adjust

Sweep Rotate Swheel to SWEEP and press S button

Rotate Swheel to adjust

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens 25 Bedienungsanleitung

Siemens

Siemens POLYMOBIL Plus Installationshandbuch

Siemens

Siemens SONOLINE G50 Bedienungsanleitung

Siemens

Siemens Servo i Bedienungsanleitung

Siemens

Siemens ACUSON X150 Bedienungs- und Wartungsanleitung

Siemens

Siemens MAMMOMAT NovationDR Bedienungsanleitung

Siemens

Siemens POLYMOBIL Plus Installationshandbuch

Siemens

Siemens SIREMOBIL Compact Gebrauchsanweisung

Siemens

Siemens SOMATOM Emotion 6 Benutzerhandbuch

Siemens

Siemens POWERMOBIL Bedienungsanleitung

Siemens

Siemens SOMATOM Emotion syngo CT 2007E Bedienungsanleitung

Siemens

Siemens MAMMOMAT Novation SP Bedienungsanleitung

Siemens

Siemens Uroskop ACCESS Installationshandbuch

Siemens

Siemens ARCADIS Varic Installationshandbuch

Siemens

Siemens ARCADIS Varic Bedienungsanleitung

Siemens

Siemens VB 13C Bedienungsanleitung

Siemens

Siemens MAGNETOM syngo MR D11 Bedienungsanleitung

Siemens

Siemens SIREMOBIL Iso-C Betriebsanleitung

Siemens

Siemens MULTIMOBIL 5C Bedienungsanleitung

Siemens

Siemens Drager medical Carina Bedienungsanleitung

Siemens

Siemens Sonoline G20 Bedienungs- und Wartungsanleitung

Siemens

Siemens MammoReport Plus Technische Daten

Siemens

Siemens syngo MR E11 Bedienungsanleitung

Siemens

Siemens AXIOM Iconos R200 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung