Siemens ARCADIS Varic Bedienungsanleitung

The reproduction, transmission or use

of this document or its contents is not

permitted without express written

authority. Offenders will be liable for

damages. All rights, including rights

created by patent grant or registration

of a utility model or design, are

reserved.

Print No.:

Mühlhäußer

ARCADIS Varic / Orbic

System

Adjustment

2006

SPR2-310.842.01.07.02

Replaces: SPR2-310.842.01.06.02

English

Doc. Gen. Date: 12.06

Main System / Adjustment

0808001708081080

2 Revision / Disclaimer

ARCADIS Varic / Orbic SPR2-310.842.01.07.02 Siemens AG

12.06 CS SD 24

Page 2 of 34

Medical Solutions

1Revision / Disclaimer

Document revision level

The document corresponds to the version/revision level effective at the time of system

delivery. Revisions to hardcopy documentation are not automatically distributed.

Please contact your local Siemens office to order current revision levels.

Disclaimer

The installation and service of equipment described herein is to be performed by qualified

personnel who are employed by Siemens or one of its affiliates or who are otherwise

authorized by Siemens or one of its affiliates to provide such services.

Assemblers and other persons who are not employed by or otherwise directly affiliated

with or authorized by Siemens or one of its affiliates are directed to contact one of the

local offices of Siemens or one of its affiliates before attempting installation or service pro-

cedures.

Siemens AG SPR2-310.842.01.07.02 ARCADIS Varic / Orbic

12.06 CS SD 24

Table of Contents 3

Page 3 of 34

Medical Solutions

0Table of Contents

1 _______ Prerequisites ___________________________________________________ 4

Tools, Test Equipment and Aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Information and Safety Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

General information for the following adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2 _______ Adjustments ____________________________________________________ 8

Generator Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Generator Adjustment Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Load counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Image Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Collimator X-iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Display X-iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Collimator Slot Diaphragm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Display Slot Diaphragm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Dose area product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Air Kerma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Dose rate adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Checking the dose rate in automatic mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3 _______ Changes to the previous version __________________________________ 33

4 Prerequisites

ARCADIS Varic / Orbic SPR2-310.842.01.07.02 Siemens AG

12.06 CS SD 24

Page 4 of 34

Medical Solutions

1-1Prerequisites

Tools, Test Equipment and Aids 0

NOTE All tools, test equipment and aids with the exception of those

marked “*”, are listed along with their specifications in the STC

(Service Tools Catalogue).

•Standard tool kit*

•Multimeter Digital

e.g. “Fluke 8060 A” Part No. 97 02 101 Y4290

•Oscilloscope > 50 MHz

e.g. Fluke CombiScobe PM 3390 A Part No. 99 00 861 Y3155

•Dose measurement device

e.g. PTW-DALI*

or PTW-NOMEX*

or PTW-DIADOS

no longer in ARTD

Part No. 97 17 612 Y0388

•Protective conductor meter

e.g. tester Unimed 1000 Part No. 51 38 727 Y0766

•1 set of radiation filters e.g. Part No. 97 98 596 G5321

•Center cross e.g. Part No. 96 60 051 RE999

Siemens AG SPR2-310.842.01.07.02 ARCADIS Varic / Orbic

12.06 CS SD 24

Prerequisites 5

Page 5 of 34

Medical Solutions

Safety Information and Safety Measures 1.1

NOTE When performing service work and tests, please observe:

- the product-specific information in the document Replacement

of Parts, SPR2-310.841.01..

- the safety information in TD00-000.860.01.. in the Register in the

ARCADIS binder, as well as

- the safety information contained in the ARTD, Part 2.

WARNING Dangerous X-radiation during checks and adjustment work steps.

Risk of death or serious physical injury.

¹For checks and adjustments that must be performed with

radiation switched on, the prescribed radiation safety

measures must be observed; if necessary, wear radiation

protective clothing (see also ARTD-002.731.02.. and

ARTD-002.731.38.. General Guidelines for Technical Ser-

vice). These checks and adjustments are explicitly

labeled on the following pages with the radiation warning

symbol x.

Symbols

XThis symbol means “X-ray”, checks and adjustments that must be performed with

radiation ON.

6Prerequisites

ARCADIS Varic / Orbic SPR2-310.842.01.07.02 Siemens AG

12.06 CS SD 24

Page 6 of 34

Medical Solutions

General information for the following adjustments 1.2

1. Switch on the ARCADIS system.

2. In the application menu bar, click on <Options>-<Service>-<Local Service>.

3. Enter the (6-digit) password.

4. Click on <OK>.

5. Click on <Main System>.

6. Select the ARCADIS system type.

7. Click on <Next>.

The following adjustments are available:

•Generator adjustment

•Generator adjustment check

•Load counter

•Image rotation

•Collimator X-iris

•Display X-iris

•Collimator slot diaphragm

•Display slot diaphragm

•Dose area product

•Air kerma

•Dose rate adjustment / checking the dose rate in automatic mode

These adjustments are described on the following pages in the above-mentioned

sequence in this document, and they are also available in the system. A <click here> link

is available on the pages where adjustments are possible. When you click on <click

here>; the relevant adjustment description page will come up on the monitor. Always

place the description page on the right monitor.

NOTE After making changes under “Configuration” or “Adjustment”, a

backup of the new values is required.

NOTE After you enter the service menu, the currently selected dominant

is shown as a circle in the radiation field.

Siemens AG SPR2-310.842.01.07.02 ARCADIS Varic / Orbic

12.06 CS SD 24

Prerequisites 7

Page 7 of 34

Medical Solutions

Abbreviations 1.3

DAP Dose area product

DAP int Dose area product, internal measurement from system

DAP ext Dose area product, external measurement from dose meter

Kaint Dose (air kerma), internal measurement from system

Kaext Dose (air kerma), external measurement from dose meter

∆Ka/∆t int Dose rate (air kerma), internal measurement from system

∆Ka/∆t ext Dose rate (air kerma), external measurement from dose meter

CFC Continuous FluorosCopy

PFC Pulsed FluorosCopy

8 Adjustments

ARCADIS Varic / Orbic SPR2-310.842.01.07.02 Siemens AG

12.06 CS SD 24

Page 8 of 34

Medical Solutions

2-2Adjustments

Generator Adjustment 0

1. Register an emergency patient to allow radiation release.

2. Place 2.1 mm Cu on the radiation exit port of the single tank.

3. Click on <Go>.

¹Action bar: “start fluoroscopy”

X4. Start fluoro

¹Action bar: “continue fluoro”

¹Status bar: “kV- offset-learning”

¹Status bar: “kV- learning done”

¹Action bar: “stop fluoroscopy”

5. Stop fluoro

¹Status bar: “generator learning”

¹Action bar: “start fluoroscopy”

X6. Start fluoro

¹Action bar: “continue fluoro”

¹Status bar: “warmup” (~ 8 minutes)

¹Status bar: “filament correction”

¹Status bar: “learning pushfactor”

¹Status bar: “gen. learning done”

¹Action bar: “stop fluoroscopy”

7. Stop fluoro

8. Click on <Save>.

¹A window appears: “Main system values were successfully saved” --> click on

<OK>.

9. Click on “>” for the next page (multiple exposure) and perform a generator adjustment

check.

Siemens AG SPR2-310.842.01.07.02 ARCADIS Varic / Orbic

12.06 CS SD 24

Adjustments 9

Page 9 of 34

Medical Solutions

Generator Adjustment Check 2.1

1. Click on <Go> to activate “Multiple Exposure”.

¹The system is now in direct exposure mode.

2. Select 81 kV with the kV+ / kV- keys and 8 mAs with the mAs+ / mAs- keys

3. Connect oscilloscope channel 1 to D1.X46, ground at 0V for "mA ist".

¹Set the sensitivity to 2 V / Div. (1 V = 2.5 mA).

4. Connect oscilloscope channel 2 to D1.X48, ground at 0 V for "kV ist".

¹Set the sensitivity to 2 V / Div. (1 V = 20 kV)

¹Set the time to 5 ms / Div.

X5. Release an exposure with the hand switch and store the oscillogram.

6. Evaluate the oscillogram (Fig.1/p.9), tolerance for the mA curve:

¹The tube current must reach 13 mA ± 1.5 mA within 3 ms

7. Click on <Go> to stop the direct exposure mode.

8. If the tube current (Fig.1/p.9)exceeds the specified tolerances, the generator adjust-

ment and the mAs counter adjustment must be repeated.

Fig. 1: Generator adjustment

10 Adjustments

ARCADIS Varic / Orbic SPR2-310.842.01.07.02 Siemens AG

12.06 CS SD 24

Page 10 of 34

Medical Solutions

Load counter 2.2

Store load counter data

1. Switch on the system and insert a CD in the CD-ROM drive.

2. Open the service application.

3. Click on <Reports> and <Configuration Online>.

¹A new report of the main system will be generated.

4. Click on <Exit> to close this window.

5. Click on <Eventlog> and <Burn Log-Files> in the service menu.

¹A window appears “Do you want to burn a newly created developer SaveLog

too?”.

6. Click on <Yes> , <Select All> and <Burn Files>.

¹All data will be burned on the CD, including the actual load counter data and the

event log.

NOTE Replacing the D1 board (main system) sets the “reset counter”

and the load units to “0”.

Load counter reset

1. Install the new tube and enter the new single tank serial number under <Main Sys-

tem>-<Configuration>-<Load Counter>.

2. Under “Adjustment” click on <Load Counter>.

3. Click on <Go> to reset the load counter.

¹A load counter reset is only possible after the new single tank serial number is

entered under <Main System>-<Configuration>-<Load Counter>.

4. Click on <Go> to end the reset of the load counter.

¹The main system reboots

¹A error message appears “Single Tank is not equal...”

NOTE After a load counter reset, the serial number of the new tube is not

shown under <Main System>-<Adjustment>-<Load Counter> until

a “Generator Adjustment” has been performed.

5. Under “Adjustment” click on <Generator Adjustment> and perform a “Generator Adjust-

ment”

6. After the “Generator Adjustment” check whether the “Load Counter” reset has been

carried out.

¹Check under <Main System>-<Adjustment>-<Load Counter> to see if the “single

tank serial number” has changed to the new tube serial number.

NOTE Send the burned CD together with the single tank and the tube

questionnaire back to the factory (as required by the terms of the

warranty).

Andere Handbücher für ARCADIS Varic

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens SIREMOBIL Iso-C Gebrauchsanweisung

Siemens

Siemens ARCADIS Avantic Installationshandbuch

Siemens

Siemens SIREMOBIL Compact Betriebsanleitung

Siemens

Siemens MAMMOMAT 3000 Einrichtungshandbuch

Siemens

Siemens MOBILETT XP Bedienungs- und Wartungsanleitung

Siemens

Siemens LITHOSTAR Multiline Leitfaden

Siemens

Siemens ACUSON P10 Stücklistenhandbuch

Siemens

Siemens MAGNETOM Aera Bedienungsanleitung

Siemens

Siemens MOBILETT XP Installationshandbuch

Siemens

Siemens ARCADIS Installationshandbuch

Siemens

Siemens Servo Screen 390 Bedienungsanleitung

Siemens

Siemens acuson Sequoia Installationsanleitung

Siemens

Siemens SIRECUST 1280 Bedienungsanleitung

Siemens

Siemens MAMMOMAT 300 Einrichtungshandbuch

Siemens

Siemens ACUSON P300 Bedienungsanleitung

Siemens

Siemens AXIOM Iconos R200 Bedienungsanleitung

Siemens

Siemens SOMATOM Spirit Bedienungsanleitung

Siemens

Siemens SONOLINE G50 Bedienungsanleitung

Siemens

Siemens MAMMOMAT Novation DR Bedienungsanleitung

Siemens

Siemens SOMATOM Sensation 16 Benutzerhandbuch

Siemens

Siemens MAMMOMAT 300 Anleitungen und Rezepte

Siemens

Siemens Artis Q Bedienungsanleitung

Siemens

Siemens MAMMOMAT 3000 Modular Bedienungsanleitung

Siemens

Siemens SONOLINE G50 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung