Siemens SIREMOBIL Iso-C Gebrauchsanweisung

SIREMOBIL Iso-C

Print No.: SPR2-230.033.03.03.02 Doc. Gen. Date: 10.99

Replaces: SPR2-230.033.03.02.02

The reproduction, transmission or

use of this document or its contents

is not permitted without express

written authority. Offenders will be

liable for damages. All rights,

including rights created by patent

grant or registration of a utility

model _or_design,_are_reserved.

Installation and Setting Instructions

Installing and setting the Video recorder

SIREMOBIL Iso-C Register 3 SPR2-230.033.03 Page 2 of 4 Siemens AG

Rev. 03 10.99 TD SD 24 Medical Engineering

2 Installing and setting the Video Recorder1

General 1

Safety information 1

Checks and adjustments which must be performed with radiation switched ON are identi-

fied by the radiation warning symbol . During these types of adjustments, radiation pro-

tective clothing must be worn.

Protective conductor test 1

Perform the protective conductor test according to ARTD - 002.731.17... after completing

all work and reinstalling all covers.

The protective conductor resistance must not exceed 0.2 ohms.

Additional Information 1

These instructions apply to retrofitting a video recorder on a SIREMOBIL Iso-C system

with Memoskop C / Memoskop C & MOD / Memoskop C-SUB /

Memoskop C-SUB & MOD.

Materials required 1

Measurement and auxiliary devices required 1

Tools required 1

•Tool kit (see ARTD /part3)

•1 set of Allen keys

When performing service work and tests, adhere to the product-specific

safety information contained in the documents as well as the general

safety information contained in the ARTD part 2.

•Video recorder connection kit 31 00 489 G5437

•Service PC

•Digital-Multi-Meter DMM

•Service software (see Log book)

•Connecting cable (from service PC to host) 99 00 440 RE999

•Protective conductor meter 44 15 899 RV 090

CAUTION

Installing and setting the Video Recorder 3

Siemens AG Register 3 SPR2-230.033.03 Page 3 of 4 SIREMOBIL Iso-C

Medical Engineering Rev. 03 10.99 TD SD 24

Line voltage cable 1

Video tape recorder with 100VAC line voltage:

•Connect theline wires to transformer T1, connector TI - 34 and TI - 36.

•Connect theprotective conductor to the protective conductor terminal stripe (ye/gn).

Video tape recorder with 120VAC line voltage:

•Connect theline wires to transformer T1, connector TI - 35 and TI - 36.

•Connect theprotective conductor to the protective conductor terminal stripe (ye/gn).

Video tape recorder with 230VAC line voltage:

•Connect the video recorder line wires at terminals X2.1 and X2.2.

•Connect theprotective conductor to the protective conductor terminal strip (ge/gn).

•Route the video recorder line wires to the video recorder compartment.

Remote Release 1

•Connect the supplied control cable to the MEMOSKOP.

•Connect the cable end to the video recorder.

Video cable 1

With an existing multiformat camera or video printer 1

•Removethe75Otermination from thevideo output of themuliformat camera or switch off

the75Otermination for the video printer.

•Connect the video cable at the video output of the multiformat camera or the video printer

and route the cable to the video recorder compartment.

•Connect the video recorder input. Ensure 75O termination of the video cable.

•Connect the video recorder output to the MEMOSKOP video recorder input.

Without a multiformat camera or video printer 1

•Connect thevideo cable to Memoskop connector "Out3".

•Route the video cable to the video recorder compartment.

•Connect the video recorder input. Ensure 75O termination of the video cable.

•Connect the video recorder output to the MEMOSKOP video recorder input.

Disconnect the SIREMOBIL Iso-C line voltage cable prior to begin-

ning work.

CAUTION

SIREMOBIL Iso-C Register 3 SPR2-230.033.03 Page 4 of 4 Siemens AG

Rev. 03 10.99 TD SD 24 Medical Engineering

4 Installing and setting the Video Recorder

Programming 1

•Switchthe system on.

•Simultaneously press keys[CTRL] and [U] onthe memorykeyboard.



This calls the "User Setup menu" for Memoskop.

•Configure the video recorder output for monitor A.

(Perform the configuration for monitor B only by special customer request).

•Endthe "usermenu".

•SwitchtheSIREMOBILIso-Coffandonagain toactivatethenewconfiguration.

Function check 1

•Set the video recorder to record.

•With Fluoro, move the collimator blades slightly into the field.

Releasefluoroforapproximately20seconds.

•Stopthevideorecorderandrewindthetape.

•Replay the scene.

Concluding work 1

•SwitchOFFtheSIREMOBIL.

•Check theprotective conductor function using the protective conductor meter 44 15 899

RV. Refer also to TI236 / ARTD - 002.731.17...

Changes to previous version 1

Page 3: Paragraph "Line voltage cable" changed.

TD SD 24 / Arnold TD SD 24/ Schlee SMS Iselin / Ristau

Andere Handbücher für SIREMOBIL Iso-C

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens ARCADIS Varic Bedienungsanleitung

Siemens

Siemens POLYMOBIL Plus Installationshandbuch

Siemens

Siemens Hematek 3000 System Bedienungsanleitung

Siemens

Siemens MAMMOMAT Balance Bedienungsanleitung

Siemens

Siemens MULTIMOBIL 5C Bedienungsanleitung

Siemens

Siemens POLYMOBIL Plus Bedienungs- und Wartungsanleitung

Siemens

Siemens LITHOSTAR Multiline Leitfaden

Siemens

Siemens ARCADIS Avantic Installationshandbuch

Siemens

Siemens MammoReport Plus Technische Daten

Siemens

Siemens 25 Bedienungsanleitung

Siemens

Siemens acuson Sequoia Installationsanleitung

Siemens

Siemens MOBILETT Plus HP Betriebsanleitung

Siemens

Siemens MULTIMOBIL 5C Bedienungsanleitung

Siemens

Siemens MAMMOMAT 1000 Nova Benutzerhandbuch

Siemens

Siemens ARCADIS Varic Bedienungsanleitung

Siemens

Siemens POLYMOBIL Plus Installationshandbuch

Siemens

Siemens ARCADIS Orbic Installationshandbuch

Siemens

Siemens MAGNETOM syngo MR D11 Bedienungsanleitung

Siemens

Siemens ACUSON NX3 series Bedienungsanleitung

Siemens

Siemens syngo MR E11 Bedienungsanleitung

Siemens

Siemens MOMMOMAT 1000 Anleitungen und Rezepte

Siemens

Siemens Servo Screen 390 Bedienungsanleitung

Siemens

Siemens ARCADIS Orbic Installationshandbuch

Siemens

Siemens Uroskop ACCESS Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung