Siemens ARCADIS Avantic Installationshandbuch

The reproduction, transmission or use

of this document or its contents is not

permitted without express written

authority. Offenders will be liable for

damages. All rights, including rights

created by patent grant or registration

of a utility model or design, are

reserved.

Print No.:

Mühlhäusser

ARCADIS Avantic

System

Installation and Startup

2005

SPR2-330.814.02.01.02

Replaces: n.a.

English

Doc. Gen. Date: 02.05

I.I. laser light localizer

0886870010048590

2 Revision / Disclaimer

ARCADIS Avantic SPR2-330.814.02.01.02 Siemens AG

02.05 CS SD 24

Page 2 of 20 Medical Solutions

1Revision / Disclaimer

Document revision level

The document corresponds to the version/revision level effective at the time of system

delivery. Revisions to hardcopy documentation are not automatically distributed.

Please contact your local Siemens office to order current revision levels.

Disclaimer

The installation and service of equipment described herein is to be performed by qualified

personnel who are employed by Siemens or one of its affiliates or who are otherwise

authorized by Siemens or one of its affiliates to provide such services.

Assemblers and other persons who are not employed by or otherwise directly affiliated

with or authorized by Siemens or one of its affiliates are directed to contact one of the

local offices of Siemens or one of its affiliates before attempting installation or service pro-

cedures.

Siemens AG SPR2-330.814.02.01.02 ARCADIS Avantic

02.05 CS SD 24

Table of Contents 3

Page 3 of 20

Medical Solutions

1- 0Table of Contents

1 _______ General information______________________________________________ 4

Required Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Required aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

General safety information (in existing documents) . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Protective conductor resistance test information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Laser light localizer option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2 _______ Installation and Settings __________________________________________ 9

Installation of the I.I. laser light localizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installation of the I.I. laser light localizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Checking the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Attaching the adhesive labels (USA / Canada / UK) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Function check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Final Work Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3 _______ Servicing______________________________________________________ 17

Mechanical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Operating value inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4 _______ Service _______________________________________________________ 19

Functional checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5 _______ Changes since previous version __________________________________ 20

4 General information

ARCADIS Avantic SPR2-330.814.02.01.02 Siemens AG

02.05 CS SD 24

Page 4 of 20 Medical Solutions

1General in formation

Required Parts 0

NOTE These instructions are also the instructions for annual mainte-

nance.

•I.I. laser light localizer

- I.I. laser light localizer

- Labels

Required aids 0

•Toolbox (including set of Allen keys)

Configurations 0

•The I.I. laser light localizer is available as an add-on for:

- ARCADIS Avantic with 33 cm (13") I.I.

Siemens AG SPR2-330.814.02.01.02 ARCADIS Avantic

02.05 CS SD 24

General information 5

Page 5 of 20

Medical Solutions

Safety information 0

General safety information (in existing documents) 0

WARNING Danger of injuries, death or material damage.

Non-compliance can lead to death, injury or material damage.

Please note:

¹The product-specific safety notes in these instructions,

¹The general safety information in TD00-000.860.01... and

¹The safety information in accordance with ARTD Part 2.

WARNING Electrical voltage!

Non-compliance can lead to severe bodily injury and even death.

¹The internal uninterruptible power supply of the system

(UPS) provides several components with line voltage -

even when the system is switched off or the system

power plug is disconnected.

¹Before the system is programmed to the local line volt-

age/line frequency, it is to be disconnected from the

power supply (the power plug is to be disconnected) and

the voltage output plug of the UPS is to be disconnected

as well.

Protective conductor resistance test information 0

Observe the instructions in the "Safety Rules for Installation and Repair"

(ARTD-002.731.17 ...).

The protective conductor resistance of 0.2 ohms must not be exceeded.

First measured value

In the case of systems thoroughly tested at the factory prior to delivery, the protective con-

ductor resistance test was already performed and the measured values were recorded in

the system test report.

The measurements were performed using the measuring procedures and measuring

equipment recorded in the system test report.

The test report is included with the accompanying documentation.

If no covers were opened while installing the system and no additional components (e.g.

options) were installed or modified, the values recorded in the test report including the

measuring point (e.g. cover of the basic unit or cover of the image intensifier) can be used

in the protective conductor resistance report as the first measured value.

6 General information

ARCADIS Avantic SPR2-330.814.02.01.02 Siemens AG

02.05 CS SD 24

Page 6 of 20 Medical Solutions

If the power plug was changed during system installation, covers were removed, or addi-

tional components were installed or modified, the values provided in the test report are

invalid.

The values are to be labeled invalid. Cross out the values, enter the comment "invalid

value" and confirm this with name, date and signature.

The protective conductor test must be performed again after all work has been completed.

In the case of systems with no measured values for the protective conductor test recorded

in the system test report, the protective conductor test is to be performed after all work

has been completed.

Measurement

The measurement must be performed according to DIN VDE 0751, Part 1 (see ARTD

Part 2). In this case the protective conductor resistance for all touchable conductive parts

must be measured during the normal operating state of the system.

Make sure that control cables or data cables between the components of the system are

not mistaken for a protective conductor connection.

During the measurement the power cable and additional connection cable with the inte-

grated protective conductor (e.g., monitor cable between the basic unit and monitor trol-

ley) must be moved section by section to detect cable breaks.

The protective conductor resistance must not exceed 0.2 ohms.

The values, including the measuring points, must be recorded as first measured values in

the protective conductor resistance report.

The measuring procedure and the measuring device used (designation and serial num-

ber) are also to be documented.

Separate the page with the report from these instructions and file it in the "Reports" regis-

ter in the system binder or log book.

Siemens AG SPR2-330.814.02.01.02 ARCADIS Avantic

02.05 CS SD 24

General information 7

Page 7 of 20

Medical Solutions

Fig. 1: Measuring circuit for measuring the protective conductor resistance for units that are

disconnected from power, in compliance with DIN VDE 0751-1/2001-10, Fig. C2.

Pos. 1 = System

Pos. 2 = Application part type B (if available)

Pos. 3 = Measurement setup (integrated into measuring device)

Repeat measurement

In the case of maintenance or repairs, perform the protective conductor resistance mea-

surement again.

Document and assess the values determined in the repeat measurement.

The measurement must be performed according to DIN VDE 0751, Part 1 (see ARTD

Part 2). In this case the protective conductor resistance for all touchable conductive parts

must be measured during the normal operating state of the system.

Make sure that control cables or data cables between the components of the system are

not mistaken for a protective conductor connection.

During the measurement, the power cable and additional connection cables with the inte-

grated protective conductor (e.g. monitor cable between the basic unit and monitor trolley)

must be moved section by section to detect cable breaks.

The protective conductor resistance must not exceed 0.2 ohms.

The values determined in the repeat measurement, including the measuring points, must

be recorded and assessed in the protective conductor resistance report.

8 General information

ARCADIS Avantic SPR2-330.814.02.01.02 Siemens AG

02.05 CS SD 24

Page 8 of 20 Medical Solutions

The measuring procedure and the measuring device used (designation and serial num-

ber) are also to be documented.

NOTE For evaluation purposes, the first measured value and the values

documented during maintenance or safety checks are to be com-

pared to the measured values. A sudden or unexpected increase

in the measured values may indicate a defect in the protective con-

ductor connections (protective conductor or contacts) - even if the

limit value of 0.2 ohms is not exceeded.

Laser light localizer option 0

(Comment: Information applies to line-type lasers of laser class 1M, e.g., laser light

localizers, I.I. / ARCADIS Avantic)

CAUTION Laser emissions!

This product contains lasers of the class 1M. (USA: Laser class

1M)

Non-compliance can result in injury.

¹Observe the safety information in ARTD-002.731.03...

When working with the laser light localizer, do not look

directly into the laser beam.

NOTE Laser emissions!

There is no direct hazard to the eye (blinking reflex). Nevertheless

do not look directly into the laser beam.

Siemens AG SPR2-330.814.02.01.02 ARCADIS Avantic

02.05 CS SD 24

Installation and Settings 9

Page 9 of 20

Medical Solutions

2Installa tion and Settings

Installation of the I.I. laser light localizer 0

Preparation 0

•Removeable grid with grid segment - remove by loosening screws (see (1/Fig.2/p.9)

and (1/Fig.3/p.9)).

Fig. 2: Removeable grid

Fig. 3: Removeable grid with grid segment

•Unscrew I.I. ring and remove carefully (see (1/Fig.4/p.10)).

•Pull out wires with plug that are wedged in at the side of the I.I. housing (see

(1/Fig.5/p.10)).

10 Installation and Settings

ARCADIS Avantic SPR2-330.814.02.01.02 Siemens AG

02.05 CS SD 24

Page 10 of 20 Medical Solutions

Fig. 4: I.I._ring

Fig. 5: Plug connector

Andere Handbücher für ARCADIS Avantic

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens MOBILETT XP Installationshandbuch

Siemens

Siemens POLYMOBIL Plus Installationshandbuch

Siemens

Siemens MAMMOMAT 3000 Einrichtungshandbuch

Siemens

Siemens HearCheck Screener Bedienungsanleitung

Siemens

Siemens Immulite Homocysteine 2000 Bedienungsanleitung

Siemens

Siemens ACUSON X150 Bedienungs- und Wartungsanleitung

Siemens

Siemens SOMATOM Scope Bedienungsanleitung

Siemens

Siemens Drager medical Apollo SW 4.n Betriebsanleitung

Siemens

Siemens MOBILETT XP Bedienungsanleitung

Siemens

Siemens SIRECUST 1280 Bedienungsanleitung

Siemens

Siemens 25 Bedienungsanleitung

Siemens

Siemens MAMMOMAT 300 Anleitungen und Rezepte

Siemens

Siemens SOMATOM Emotion 6 Benutzerhandbuch

Siemens

Siemens SIREMOBIL Iso-C 3D Bedienungsanleitung

Siemens

Siemens MammoReport Plus Technische Daten

Siemens

Siemens Artis Q Bedienungsanleitung

Siemens

Siemens SIREMOBIL Iso-C Betriebsanleitung

Siemens

Siemens SIREMOBIL Compact L Betriebsanleitung

Siemens

Siemens LITHOSTAR Multiline Leitfaden

Siemens

Siemens ACUSON Freestyle Bedienungsanleitung

Siemens

Siemens ACUSON S Series Bedienungsanleitung

Siemens

Siemens MAMMOMAT NovationDR Bedienungsanleitung

Siemens

Siemens POLYMOBIL III Installationshandbuch

Siemens

Siemens MAMMOMAT Inspiration Gebrauchs- und Wartungshandbuch

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung