SIGMA TEK CP 112-1 Bedienungsanleitung

CP 112-1

S-DIAS CPU Module

Operating Manual

Date of creation: 10.02.2022

Version date: 19.09.2022

Article number: 20-004-112-1-E

Publisher: SIGMATEK GmbH & Co KG

A-5112 Lamprechtshausen

Tel.: +43/6274/4321

Fax: +43/6274/4321-18

Email: [email protected]

WWW.SIGMATEK-AUTOMATION.COM

SIGMATEK GmbH & Co KG

Translation from German

distributed in any form (print, photocopy, microfilm or in any other process) without express permission.

We reserve the right to make changes in the content without notice. SIGMATEK GmbH & Co KG is not responsible

for technical or printing errors in this handbook and assumes no responsibility for damages that occur through its

use.

S-DIAS CPU-MODULE CP 112-1

19.09.2022 Page 1

S-DIAS CPU Module CP 112-1

with 2 Ethernet

1 VARAN OUT

1 USB-Device

1 microSD

1 USB-Host

1 CAN

The S-DIAS CP 112-1 CPU module is a high-performance

processor unit for the S-DIAS I/O modules. Through the

various interfaces, such as Ethernet, 2x Ethernet, VARAN,

CAN bus, USB and an exchangeable microSD card, this

module can be used for a variety of applications.

Additionally, a RealTimeClock and zero voltage proof

RAM space with buffer battery are provided.

The CPU and I/O modules are powered via the integrated

supply module.

CP 112-1 S-DIAS CPU MODULE 
 
Page 2 19.09.2022 
Contents 
1Introduction............................................................................. 6 
1.1 Target Group/Purpose of this Operating Manual......................6 
1.2 Important Reference Documentation .........................................6 
1.3 Contents of Delivery.....................................................................6 
2Basic Safety Guidelines......................................................... 7 
2.1 Symbols Used...............................................................................7 
2.2 Disclaimer......................................................................................9 
2.3 General Safety Guidelines.........................................................10 
2.4 Software/Training .......................................................................12 
3Norms and Guidelines...........................................................13 
3.1 Guidelines....................................................................................13 
3.1.1 EU Declaration of Conformity............................................................13 
4Technical Data .......................................................................14 
4.1 Performance Data.......................................................................14 
4.2 Standard Configuration..............................................................15 
4.3 Electrical Requirements.............................................................16 
4.3.1 Module Supply (Input) .......................................................................16 
4.3.2 S-DIAS Bus Supply (Output) .............................................................16 
4.4 Miscellaneous .............................................................................18 
4.5 Environmental Conditions.........................................................18 
5Mechanical Dimensions........................................................19 

 S-DIAS CPU-MODULE CP 112-1 
 
09.2022 Page 3 
6Connector Layout..................................................................20 
1 Status LEDs Interface Part.........................................................21 
2 Status LEDs Supply Part............................................................22 
3 PS 101 Connector.......................................................................23 
4 CP 112-1 Connector....................................................................24 
5 Applicable Connector Cables....................................................26 
6 Applicable Connectors...............................................................27 
7 Label Field...................................................................................28 
7Mounting................................................................................29 
8Wiring.....................................................................................31 
1 Shielding......................................................................................32 
2 ESD Protection............................................................................33 
3 USB Interface Connections .......................................................33 
9Strain Relief ...........................................................................34 
CAN Bus Setup......................................................................35 
1 CAN Bus Station Number ..........................................................35 
2 Number of CAN Bus Participants..............................................35 
3 CAN Bus Data Transfer Rate.....................................................35 
4 CAN Bus Termination.................................................................36 
Process Diagram...................................................................37 
Status and Error Messages..................................................38 

CP 112-1 S-DIAS CPU MODULE 
 
Page 4 19.09.2022 
Transport/Storage..................................................................45 
Cooling ...................................................................................45 
Maintenance...........................................................................46 
1 Service.........................................................................................46 
2 Repair...........................................................................................46 
Storage ...................................................................................47 
Buffer Battery.........................................................................48 
Storage Media ........................................................................49 
Application Exceptions.........................................................50 
1 The File System does not Support Safe Writing via SRAM....50 
2 Data Breakpoint ..........................................................................50 
Recommended Shielding for VARAN...................................51 
1 Wiring from the Control Cabinet to an External VARAN 
Component..................................................................................52 
2 Wiring Outside of the Control Cabinet.....................................53 
3 Shielding for Wiring Within the Control Cabinet.....................54 
4 Connecting Noise Generating Components............................55 
5 Shielding Between Two Control Cabinets ...............................56 
Working with and on the CP 112-1.......................................57 
Disposal..................................................................................58 

S-DIAS CPU-MODULE CP 112-1

19.09.2022 Page 5

CP 112-1 S-DIAS CPU MODULE

Page 6 19.09.2022

1 Introduction

1.1 Target Group/Purpose of this Operating Manual

This operating manual contains all information required to operate this product.

This operating manual is intended for:

•Project planners

•Technicians

•Commissioning engineers

•Machine operators

•Maintenance/test technicians

General knowledge of automation technology is required.

Further help and training information, as well as the appropriate accessories can be found on

our website www.sigmatek-automation.com

Our support team is happily available to answer your questions.

Please see our website for our hotline number and business hours.

1.2 Important Reference Documentation

This and additional documents can be downloaded from our website or obtained through

SIGMATEK Support.

1.3 Contents of Delivery

1x CP 112-1

S-DIAS CPU-MODULE CP 112-1

19.09.2022 Page 7

2 Basic Safety Guidelines

2.1 Symbols Used

The following symbols are used in the operator documentation for warning and danger

messages, as well as informational notes:

DANGER

Danger indicates that death or serious injury will occur, if the specified

measures are not taken.

To avoid death or serious injuries, observe all guidelines.

Danger indique une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures graves,

voire mortelles.

WARNING

Warning indicates that death or serious injury can occur, if the specified

measures are not taken.

To avoid death or serious injuries, observe all guidelines.

Avertissement d’une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures graves,

voire mortelles.

CAUTION

Caution indicates that moderate to slight injury can occur, if the specified

measures are not taken.

To avoid moderate to slight injuries, observe all guidelines.

Attention indique une situation dangereuse qui, faute de prendre les

mesures adéquates, peut entraîner des blessures assez graves ou légères.

Respectez toutes les consignes pour éviter des blessures graves,

voire mortelles.

Information

Provides important information on the product, handling or relevant sections

of the documentation, which require particular attention.

Fournit des recommendations importantes sur le produit, la manipulation ou

sections relevantes de la documentation, qui nécessitent prêter une

attention particulière.

CP 112-1 S-DIAS CPU MODULE

Page 8 19.09.2022

Danger for ESD-sensitive components.

Les signes de danger pour les composants sensibles aux décharges

électrostatiques.

Inhaltsverzeichnis

Andere SIGMA TEK Steuereinheit Handbücher

SIGMA TEK

SIGMA TEK MDP 102-1 Bedienungsanleitung

SIGMA TEK

SIGMA TEK ST 151 Bedienungsanleitung

SIGMA TEK

SIGMA TEK KL 181 Bedienungsanleitung

SIGMA TEK

SIGMA TEK S-DIAS PS 101 Bedienungsanleitung

SIGMA TEK

SIGMA TEK AM 222 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SDM 081 Bedienungsanleitung

SIGMA TEK

SIGMA TEK AO 046 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SCP 111-S Bedienungsanleitung

SIGMA TEK

SIGMA TEK AM 441 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SCP 111 Bedienungsanleitung

SIGMA TEK

SIGMA TEK TO 161 Bedienungsanleitung

SIGMA TEK

SIGMA TEK SCP 111-2 Bedienungsanleitung

SIGMA TEK

SIGMA TEK STO 081 Bedienungsanleitung

SIGMA TEK

SIGMA TEK EZ 102 Bedienungsanleitung

SIGMA TEK

SIGMA TEK CP 101 Bedienungsanleitung

SIGMA TEK

SIGMA TEK EZ 101 Bedienungsanleitung

SIGMA TEK

SIGMA TEK HMI-Link G2 Device Bedienungsanleitung

SIGMA TEK

SIGMA TEK SRO 021 Bedienungsanleitung

SIGMA TEK

SIGMA TEK PIM 021 Bedienungsanleitung

SIGMA TEK

SIGMA TEK CCP 531 Bedienungsanleitung

SIGMA TEK

SIGMA TEK PIM 041-W Bedienungsanleitung

SIGMA TEK

SIGMA TEK S-DIAS AI 022 Bedienungsanleitung

SIGMA TEK

SIGMA TEK ST 011 Bedienungsanleitung

SIGMA TEK

SIGMA TEK S-DIAS DM 821 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung