SIIG CyberSerial Dual PCIe Bedienungsanleitung

CyberSerial Dual PCIe

Quick Installation Guide

04-0570A

Introducing the CyberSerial Dual PCIe

The CyberSerial Dual PCIe-Dual Bracket high-speed serial

I/O card provides two additional 9-pin serial ports.

FeaturesandBenefits

•Compliant with PCI Express Base Specification 1.0a

•PCI Express 1-lane (x1) serial I/O card works with

PCI Express slots with different lane width

•Installs into any available PCI Express slot and

provides two 9-pin RS232 serial ports

•128-byte FIFO buffers dramatically increase data

transmit/receive speed and supports data rates up

to 920 Kbps

•Works as standard RS232 port or with 5V or 12V

power output for devices that require power

SystemRequirements

•PCI Express-enabled system with an available PCI

Express slot

•Windows®2000 / XP (32-/64-bit) / Server 2003 &

2008 (32-/64-bit) / Vista (32-/64-bit)

PackageContents

•CyberSerial Dual PCIe-Dual Bracket adapter

• Connector bracket with 9-pin serial port (for the 2nd

serial port)

• "Y" split power cable

• Driver CD & quick installation guide

Layout

Figure 1: Layout

* Note: If the serial port requires power output,

connect the system power source to board's power

connector. However, most serial devices do not

require additional power through the serial port.

Refer to your serial device's manual for more

information.

JumperSettings(J1,J2)

Short 2-3/no jumper = 0 volts

Short 1-2 = 5V

Short 3-4 = 12V

Power connector*

Serial port 1

Connector bracket

with 9-pin serial port

for 2nd serial port J1

Pin 1

Hardware Installation

General instructions for installing the card are provided

below. Since the design of computer cases and

motherboards vary, refer to your computer’s reference

manual for further information, if needed.

Static Electricity Discharge may permanently damage

your system. Discharge any static electricity build up in

your body by touching your computer’s case for a few

seconds. Avoid any contact with internal parts and

handle cards only by their external edges.

1. Turn OFF the power to your computer and any

other connected peripheral devices.

2. Unplug the power cord from the computer.

3. Remove your computer’s cover, then remove the

slot bracket cover from an available PCI Express

slot.

4. Set J1 and J2 jumper settings to the desired voltage

only if your serial device needs additional power

from the serial port. However, most serial devices

do not require additional power. If power output is

required, connect the board's power connector to

the system power supply. For more information see

Jumper Settings on page 2.

5. Plug-in the Connector bracket with 9-pin serial

port to Pin header for serial port 2. Position the

stripe on the ribbon cable to point to silkscreened

pin 1. See Layout on page 2for proper connection.

Skip this step if only one serial port is needed.

6. To install the card, carefully align the card's bus

connector with the selected PCI Express slot on the

motherboard. Push the board down firmly, but

gently, until it is well seated.

7. Replace the slot bracket screw to secure the card.

8. Replacethecomputercoverandreconnect thepower

cord.

Driver Installation

This section provides information on how to install the

CyberSerial Dual PCIe-Dual Bracket drivers.

Windows2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device

(recommended), and click Next.

3. Check Specify a location, uncheck the other boxes,

then click Next.

4. Insert the driver CD, type in D:\2K, then click OK.

(Change D: to match your CD-ROM drive letter)

5. Click Next and Finish.

6. Repeat steps 1-5 to complete the installation.

WindowsXP/Server2003(32-/64-bit)

1. AttheFound New Hardware Wizard,select No, not

this time, click Next.

2. Select Install from a list or specific location

(Advanced),then click Next.

3. Insert the driver CD, check Include this location in

the search, uncheck the other box.

For 32-bit: Type D:\XP-Later\32-bit, and click Next,

then click Finish. (Change D: to match your CD-

ROM drive letter)

For 64-bit: Type D:\XP-Later\64-bit, and click Next,

click Continue Anyway, then click Finish. (Change

D: to match your CD-ROM drive letter)

4. Repeat steps 1-3 one or two times to complete the

installation.

WindowsVista™(32-/64-bit)

1. At the Found New Hardware window, click Locate

and install driver software (recommended), then

click Continue.

2. Click I don't have the disc. Show me other options.

3. Insert the driver CD, click Browse my computer for

driver software (advanced).

For32-bit:Type D:\XP-Later\32-bit,then click Next.

(Change D: to match your CD-ROM drive letter)

For64-bit:Type D:\XP-Later\64-bit,then click Next.

(Change D: to match your CD-ROM drive letter)

4. Click Close.

5. Repeat steps 2-4 to complete the installation.

Server2008(32-/64-bit)

1. At the Found New Hardware window, click Locate

and install driver software (recommended).

2. Click Don't search online.

3. Click I don't have the disc. Show me other options.

4. Insert the driver CD, click Browse my computer for

driver software (advanced).

For32-bit:Type D:\XP-Later\32-bit,then click Next.

(Change D: to match your CD-ROM drive letter)

For64-bit:Type D:\XP-Later\64-bit,then click Next.

(Change D: to match your CD-ROM drive letter)

5. Click Close.

6. Repeat steps 2-5 one or two times to complete the

installation.

ToVerifyWindowsInstallation

1. Check in Device Manager to verify successful driver

installation.

For Windows 2000 / XP / Server 2003: Right click My

Computer, click Manage, click Device Manager.

For Windows Vista: Right click Computer, click

Manage, click Continue, click Device Manager.

For Windows Server 2008: Right click Computer, click

Manage, double click Diagnostics, click Device

Manager.

2. Click on the +(plus sign) in front of Ports (COM &

LPT), CyberSerial 16C950.... should be displayed.

Changing COM Port Number

Some serial devices need a specific COM port in order to

work. If your serial device works properly, do not

change this setting.

1. From the Device Manager window double click

Ports (COM & LPT), then double click the

CyberSerial PCI serial port you want to change.

2. Click Settings tab and click Advanced.

3. Click the down arrow that is next to the COM Port

number box, select a COM port that is not in use,

then click OK.

4. Click OK, then close Device Manager to save the

changes.

Technical Support and Warranty

QUESTIONS? SIIG’sOnline Support hasanswers! Simplyvisitour

web site at www.siig.com and click Support. Our online support

database is updated daily with new drivers and solutions. Answers

toyour questions could be just a few clicks away. You can also submit

questions online and a technical support analysts will promptly

respond.

SIIGoffers alifetime manufacturerwarranty with thisproduct. Please

see our web site for more warranty details. If you encounter any

problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the

product to the store where you purchased from.

B) Ifyourpurchase has passed the store's return policy period, please

follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then RMA to submit a

request to SIIG RMA. If the product is determined to be

defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

•Properly pack the product for shipping. All software, cable(s)

and any other accessories that came with the original package

must be included.

•Clearly write your RMA number on the top of the returned

package. SIIG will refuse to accept any shipping package, and

will not be responsible for a product returned without an

RMA number posted on the outside of the shipping carton.

•You are responsible for the cost of shipping. Ship the product

to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

•SIIG will ship the repaired or replaced product via Ground

in the U.S. and International Economy outside of the U.S. at

no cost to the customer.

CyberSerial Dual PCIe-Dual Bracket is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered

trademarksofSIIG,Inc. Microsoft,WindowsandWindowsVistaareeitherregisteredtrademarksor

trademarksofMicrosoftCorporationinthe UnitedStatesand/orother countries. Othernamesusedin

this publication are for identification only and may be trademarks of their respective companies.

About SIIG, Inc.

Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer

of I/O connectivity products, including PCIe, PCI & ISA serial and

parallel ports, USB, Serial ATA & UltraATA controllers, FireWire

(1394a/b),networking, soundcards,and other accessories. SIIGis the

premier one-stop source of upgrades.

SIIGproducts offercomprehensive user manuals,many user-friendly

features, and are backed by an extensive manufacturer warranty.

High-quality control standards are evident by the overall ease of

installation and compatibility of our products, as well as one of the

lowest defective return rates in the industry. SIIG products can be

found in computer retail stores, mail order catalogs, through major

distributors, system integrators, and VARs in the Americas and the

UK, and through e-commerce sites.

PRODUCT NAME

CyberSerial Dual PCIe-Dual Bracket

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS

B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCCCOMPLIANCESTATEMENT:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Phone: 510-657-8688

Andere Handbücher für CyberSerial Dual PCIe

Inhaltsverzeichnis

Andere SIIG PCI-Karte Handbücher

SIIG

SIIG SC-SA1012-S1 Bedienungsanleitung

SIIG

SIIG FireWire 800 3-Port PCI Bedienungsanleitung

SIIG

SIIG Universal PCI Serial Cards Bedienungsanleitung

SIIG

SIIG CyberPro 1S1P Bedienungsanleitung

SIIG

SIIG 04-0358C Bedienungsanleitung

SIIG

SIIG 8000 Plus Bedienungsanleitung

SIIG

SIIG SC-SAE012-S2 Bedienungsanleitung

SIIG

SIIG JJ-P00212-S6 Bedienungsanleitung

SIIG

SIIG Cyber 1S1P PCI Bedienungsanleitung

SIIG

SIIG SIISCSATM12 Bedienungsanleitung

SIIG

SIIG CyberPro PCI 2S Bedienungsanleitung

SIIG

SIIG Serial ATA 4-Channel PCI Bedienungsanleitung

SIIG

SIIG RS232 Serial Bedienungsanleitung

SIIG

SIIG PCI-to-PC Card Pro Bedienungsanleitung

SIIG

SIIG CyberPro PCI 1S Bedienungsanleitung

SIIG

SIIG 1394 PCI Adapter Bedienungsanleitung

SIIG

SIIG SIIG 2S1P Combo-Value Bedienungsanleitung

SIIG

SIIG CyberPro PCI 8S Bedienungsanleitung

SIIG

SIIG JJ-P49012-S6 Bedienungsanleitung

SIIG

SIIG 1394 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCIe Bedienungsanleitung

SIIG

SIIG Low Profile PCI I/O Bedienungsanleitung

SIIG

SIIG SIIG 2S1P Combo-Value Bedienungsanleitung

SIIG

SIIG SC-SA4M12 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung

Alpha Networks

Alpha Networks WMP-A13V Bedienungsanleitung

Acqiris

Acqiris SA230E Bedienungsanleitung