SIIG PCI-to-PC Card Pro Bedienungsanleitung

PCI-to-PC Card Pro

Quick Installation Guide

FeaturesandBenefits

• Compliant with PCI local bus specification 2.2

• Compliant with PC card standard release 8.0

specification

• Supports CardBus (Card-32) and 16-bit (PCMCIA

2.1/JEIDA 4.2) card

• ACPIandPCIbuspowermanagement1.1compliant

• Bridge function between PCI bus and CardBus

• Supports PCI Master/Target protocol and direct

connection to PCI bus

SystemRequirements

• PentiumorequivalentPCwithanavailablePCIslot

•Windows®98SE/ME/2000:supports32-bitPCCard

•WindowsXP/Server2003/Vista: supportsboth32-

bit PC Card and 16-bit PCMCIA

PackageContents

•PCI-to-PC Card Pro

• This quick installation guide

04-0362C

Layout

Figure 1. Layout

Note: The ejector lever can be placed in two

positions, locked and unlocked. When inserting a

PC Card, the lever can be in either position.

However,thelevermustbeintheunlockedposition

to eject a PC Card. To unlock the lever, push it in

until you hear a click then release it.

Hardware Installation

General instructions for installing the card are provided

below. Since the design of computer cases and

motherboards vary, refer to your computer’s reference

manual for further information, if needed.

Static Electricity Discharge may permanently damage

your system. Discharge any static electricity build up in

your body by touching your computer case for a few

seconds. Avoid any contact with internal parts and

handle cards only by their external edges.

Ejector lever

1. Turn OFF the power to your computer.

2. Unplugthepowercordandremoveyourcomputer's

cover.

3. Remove the slot bracket from an available PCI slot.

4. CarefullyalignthecardtotheselectedPCIslotpush

the board down firmly, but gently, until it is well

seated.

5. Replace the slot bracket holding screw to secure the

card.

6. Replacethecomputercoverandreconnectthepower

cord.

Driver Installation

Pleasemakesuretheboardisinstalledbeforeproceeding

with software installation.

Windows98SE

1. Boot up Windows. At the Welcome to the PC

Card (PCMCIA) Wizard, select No, and click Next.

2. At the PC Card (PCMCIA) Wizard, select No,

then click Next.

3. Click Finish.

Note: IfpromptedfortheWindows98SEInstallation

CD, click OK. Insert this CD, then click OK.

4. Restart Windows to complete the installation.

WindowsME/2000/XP/Server2003/Vista

Windows ME, 2000, XP, Server 2003 and Vista operating

system will automatically detect and install the correct

drivers for the PC Card adapter. Restart Windows if

you're prompted to do so.

ToVerifySuccessfulInstallation

1. Check Device Manager to verify successful driver

installation.

Windows 98SE/ME: From the main desktop, right

click My Computer, then click Properties. Click

Device Manager tab.

Windows 2000/XP/Server 2003/Vista: Right click My

Computer, click Manage, then click Device

Manager.

2. Look for the following.

Windows 98SE/ME: Double click PCMCIA socket:

- Ricoh RL5C475 CardBus Controller should be

displayed.

Windows 2000/XP/Server 2003/Vista: Double click

PCMCIA adapters:

- Ricoh R/RL/RT/RC/5C475(II), R5C520 or

Compatible CardBus Controller should be

displayed.

3. If this entry doesn't appear, shut down your system

andmakesurethePCIboardisproperlyseated. Or

installthePCCardadapterintoanotherPCIslotand

try again.

Figure 2. Inserting a PC Card

Insert with

label facing

down

Inserting/Removing the PC Cards

InsertingthePCCard: There'sonlyonewaythePCCard

canbeinsertedintotheslot. Donottrytoforceitinifyou

meet some resistance. In most systems, the PC Card

should be inserted with the label facing down towards

the bottom of your system. See Figure 2 for proper

orientation.

Removing the PC Card: Simply push the ejector lever

and the PC Card will slide out from the card slot. See

Figure 1 on page 2 for more details.

Ejector lever

Blank Page

Technical Support and Warranty

QUESTIONS? SIIG’sOnlineSupporthasanswers! Simplyvisitour

web site at www.siig.com and click Support. Our online support

databaseisupdated dailywithnewdriversandsolutions. Answers

toyourquestionscouldbejustafewclicksaway. Youcanalsosubmit

questions online and a technical support analysts will promptly

respond.

SIIGoffersalifetimemanufacturerwarrantywiththisproduct. Please

see our web site for more warranty details. If you encounter any

problemswiththis product,pleasefollowtheproceduresbelow.

A) If it is within the store's return policy period, please return the

producttothestorewhereyoupurchasedfrom.

B) Ifyourpurchasehaspassedthestore'sreturnpolicyperiod,please

followthese steps tohave the productrepaired or replaced.

Step1: SubmityourRMArequest.

Go to www.siig.com, click Support, then RMA to submit a

request to SIIG RMA. If the product is determined to be

defective,anRMAnumberwillbeissued. SIIGRMAdepartment

can also be reached at (510) 413-5333.

Step2: After obtainingan RMAnumber, ship the product.

•Properlypacktheproductforshipping. Allsoftware,cable(s)

andanyotheraccessoriesthatcamewiththeoriginalpackage

mustbeincluded.

•Clearly write your RMA number on the top of the returned

package. SIIGwillrefusetoacceptanyshippingpackage,and

will not be responsible for a product returned without an

RMA number posted on the outside of the shipping carton.

•Youareresponsible for thecostofshipping. Ship theproduct

to the following address:

SIIG,Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA#:

•SIIG will ship the repaired or replaced product via Ground

in the U.S. and International Economy outside of the U.S. at

nocosttothecustomer.

PCI-to-PCCardProisatrademarkofSIIG,Inc. SIIGandtheSIIGlogoareregisteredtrademarksofSIIG,

Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a

registeredtrademarkofIntelCorporation. Othernamesusedinthispublicationareforidentification

onlyandmaybetrademarksoftheirrespectivecompanies.

About SIIG, Inc.

Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer

ofI/Oconnectivityproducts,includingPCI&ISAserialandparallel

ports,USB,SerialATA&UltraATAcontrollers,FireWire(1394a/b),

networking,soundcards,andotheraccessories. SIIG is the premier

one-stopsourceofupgrades.

SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly

features, and are backed by an extensive manufacturer warranty.

High-quality control standards are evident by the overall ease of

installation and compatibility of our products, as well as one of the

lowest defective return rates in the industry. SIIG products can be

found in computer retail stores, mail order catalogs, through major

distributors, system integrators, and VARs in the Americas and the

UK,andthroughe-commercesites.

PRODUCT NAME

PCI-to-PC Card Pro

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS

B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCCCOMPLIANCESTATEMENT:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Inhaltsverzeichnis

Andere SIIG PCI-Karte Handbücher

SIIG

SIIG Serial ATA 4-Channel PCI Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Bedienungsanleitung

SIIG

SIIG SC-SA4M12 Bedienungsanleitung

SIIG

SIIG Low Profile PCI-1S1P Bedienungsanleitung

SIIG

SIIG Cyber 1S1P PCI Bedienungsanleitung

SIIG

SIIG Duet Parallel PCI Bedienungsanleitung

SIIG

SIIG Low Profile PCI-2S Bedienungsanleitung

SIIG

SIIG 1394 PCI Adapter Bedienungsanleitung

SIIG

SIIG ID-P40311-S1 Bedienungsanleitung

SIIG

SIIG CyberPro PCI 4S Bedienungsanleitung

SIIG

SIIG JJ-P49012-S6 Bedienungsanleitung

SIIG

SIIG SATA II-150 PCI Bedienungsanleitung

SIIG

SIIG Cyber 2S1P PCI Bedienungsanleitung

SIIG

SIIG LB-GE0114-S1 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Bedienungsanleitung

SIIG

SIIG CyberPro 1S1P Bedienungsanleitung

SIIG

SIIG US2265 Bedienungsanleitung

SIIG

SIIG 1394 Bedienungsanleitung

SIIG

SIIG Low Profile PCI-1P Bedienungsanleitung

SIIG

SIIG Hi-Speed USB 4-Port PCI Bedienungsanleitung

SIIG

SIIG DP CyberSerial Dual PCI RJ Bedienungsanleitung

SIIG

SIIG CyberPro PCI 4S Bedienungsanleitung

SIIG

SIIG SIIG 2S1P Combo-Value Bedienungsanleitung

SIIG

SIIG 4-Port RS232 Serial PCI with 16550 UART Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung

Alpha Networks

Alpha Networks WMP-A13V Bedienungsanleitung

Acqiris

Acqiris SA230E Bedienungsanleitung